Sundown Audio

can i get to nightshades dual 1 ohm, wire them dowm to 0.25 ohm and run it on my 3500d. i will have about 3 batteies and h/o alternator with 250 amp. in the testing jake did the resistance, and it rose to 0.67 ohms. which they can run @0.5 ohms, right?

they came in perferct condition Thanks to mark for great service ...

Hey all I got my (2) 3500 D's and I currently have 2 of these: http://www.knukonceptz.com/productDetail.cfm?prodID=KNI-11 I have (3) 100 amp fuses in each of them..but the 3500's call for 350 amps each.... so should I upgrade and go higher with these, for a max. of 360 amps on each fuse holder http://www.knukonceptz.com/productDetail.c...rodID=MANL-120A Thanks, Freddy

This is the "official" post to be linked in our sticky amp power testing post : ----- This testing done on my Extech True Power meter a full 6-10 seconds in to the burp so we are not catching peak values: http://www.extech.com/instrument/products/...399/380976.html ----- HIGH VOLTAGE TESTING: 6x Powermaster D1000s used for testing 17.9 volts rest - did not measure voltage drop. 10,320 watts from the pair @ 1.5 ohms each after rise starting at 0.5 DCR 5160 each 11,470 watts from the pair @ 1.3 ohms each after rise starting at 0.5 DCR 5735 per amp ----- 12v SYSTEM TESTING: Starting battery + 2x Powermaster D3100s used for testing 3980 @ 0.25 rising to 0.65 @ 11.2v (engine o…

Corey Mitchell 1 Sundown 1500D and one 12" Nightshade @ 34Hz 1st place Drive-By 1 with a 116.5 (40 amps of fusing) 1st place in Street 1 with a 142.1 (40 amps of fusing) Jeremy McCord 2 Sundown 3000Ds and three 15" Nightshades @ 43Hz 1st place in Drive-By 4 with a 129.7 (320 amps of fusing) 2nd place in MOD 3 with a 151.2 (145 amps of fusing) Josh Newton 4 Sundown 1500Ds and 8 15" MA Audio XLs @ 31Hz 1st place in MOD 4 with a 155.2 (240 amps of fusing) 1st place in Drive-By 5 with a 127.7 (no fusing) Derek Jackson 2 Sundown 1500Ds and two 12" Nightshades @ 50Hz 1st place in Street 2 with a 146.5 (60 amps of fusing) 3rd place in Drive-By 3 with a 123.9 (160 amps of fusing)…

i got my SAZ-1500 today! woot! just waiting on my box from Audibel Customs to ship here, and later this week ill order my bl 15 and 1/0 wire. this amp looks amazing, and is the heaviest amp i have; the most powerful one by far. cant wait to hear it!

I'll be making my new box shortly with 4 Sound Splinter Signature RL-p 12". All 4 are D4 ohm giving me a final load of 2ohms for the amp. I was wondering if I should maybe trade the sundown 3000 for 2 1500. This way I could run 2 subs at 1ohm to each 1500. I "think" my other option is to run the 3000 at .5 ohm, but I don't know if that's a smart thing to do. My electrical consist of a 200 amp alt, 2 yellow tops, 2 runs of + 0awg, and 2 runs of - 0awg. What are your thoughts? I'm kinda at a lost right now, lol.

just wondering if 1 nightshade 12 and saz1500 in my waggon would worth a shot. im getting my a$$ beat in meca as2 i know i have a big space to fill but i love to do crazy things. i love the thiught of single subs. one more thing does anyone have a used saz1500

basically what i said in the title...what would be some subwoofers that are comparable to the nighshade?

aight i was on youtube and saw 2 sundown e8's in a ranger and was very impressed. they would be goin in my single cab ranger. i want 3. i read that they require 0.280 cu. ft of air which will be awsome cuz my boxes are .45cu. ft. there sealed enclosures. but id like to kno wats the max power these things can handle? How mcuh do they go for? they seam really bad ass. im trying to compare these to the 8" kicker l7's. thanks.

Just picked up my new Sundown 3500D's this morning with Eastern N.C.'s Rep and good buddy DJ Williams. Left out this morning at 4:30am (now that's devotion) and braved the bad traffic going and coming back from Jacob's shop. Let me tell you, yall ain't ready for the new amps! They look fantastic and have got me excited enough to get right to work on getting my upgrades installed. I am a little tired, a little hungry and well- I don't have to tell much more than that....LOL. :bigclap:

im wonderin what the specs will be on this amp as far as how many watts at what ohm. and i plan on gettin 2 BTL's so what VC config would i get them in and hoiw would i wire them??

10,320 watts from my pair @ 1.5 ohms each actual impedance after rise, starting at 0.5 DCR 5160 each 17.9 volts rest - did not measure voltage drop yet This is similar to what I got from the 3000s at a rise to ~1 ohm or below Will post more when I get more results.

Got a Nightshade 12 D1 and I have no box making skills so I'm at the mercy of someone else to have a box made. What would you guys recommend? Should I have it built at the local Car Audio shop, or would a place like this be ok? http://www.klausaudio.com/subwoofer-boxes/...p;x=23&y=10 If this site isn't any good, anybody have any alternatives online? Thanks.

Hi, I just ordered a 50x4 and will be using this to drive my mids and tweets separately. It looks like to me the best way to do this is: - connect mids to 1/2, tweets to 3/4 - for channels 1/2, set it to HPF @3000 or similar - for channels 34, set it to LPF @3000 Then, for 1/2, set the subsonic filter the the crossover point with my sub. Is this a legit use of the subsonic filter? What is the x-over slope on the subsonic? My other amp is a 125.2 bridged driving a soundsplinter rli-8. Cheers!

The first pre-sale was so popular we sold out before the amps even arrived... so we are doing it again Same deal as last time around! $850 for one $825 for two (each) $810 for four or more (each) Paypal me at [email protected] to Pre-Order! OR Order on our cart system here : http://www.sundownaudio.com/presale/ The current ETA is around the end of August -- this is a rough estimate. As always, with a pre-order the ETA is subject to change based on shipping delays, etc, etc. PLEASE do not pre-order unless you are okay with any delays that may occur. They feature 33% more output FETs than the current 3000D... a quad transformer setup (more efficient)... and some ot…

well might be makin a trade for a 15" d1 nightshade. i currently have a 15" hdc3 in a 4.7 cube box @ 38 hz using 3 4" aeros. just wanted to see how it would perform in this size of a box? dont have the time and money at the moment to built a new one. but will be when i get some extra time and money. oh and using an aq 2200d for power

Hey guys, bout to order a SAZ-1500d and a SAX-125.2 and I have a 12inch Nightshade on the way. I'm also gonna put a Kinetic HC1800 in the trunk. I'm gonna order a dual amp kit from KnuKoncepts. My question simply is whats the best amp kit for these amps? I guess it would be more of a question about what size I need. I just want to do it up as nice as possible. KnuKoncepts looked good, but I'm also open to recommendations of other wiring brands. I also want to do the Big 3. What exactly would I need for that? Any other suggestions or advice would be greatly appreciated. I've been around for a while but been out of the game for about 5 or so years(not that I knew all that…

I had decided to go with another set of 18s and swap amps too. But, I really would like to get alot of my room back. So, I will sale my bl 18's and keep both sundown saz 1500d's. I would like to change to either 2 12" nightshades or 1 12 or 15" with both amps strapped on 1. I have 20 cube box now, so anything smaller I will get alot of room back. Any suggestions on those above or possibly Z15?

I'm looking for a jumping off point for a box size. If someone would be able to help me out that would be great. It's going into a S10 extended cab.

Any information on the new SAE-1200?

Just need to know the displacement of an E8. Thanks for any help.

Anybody have any experience with the Z15 sub? Thinking about pairing one 15 with an SAE-1200D or SAZ-1000D. Also, what would be better, the SAZ or SAE? The Nightshade might be a little overkill for my tastes so I figured the Z15 might be just what I was looking for. Any feedback would be appreciated.

I have my 2 Saz-1500's strapped. I have 2 15" Fi BL subs. They have all the power options on them. Now when I set my gains with the DMM 77.5 volts - 5 volts for my headunit output i get the old smelly subs. Meaning when I turn the volume up i start to smell voice coil. So i turn the gain down a little bit and it seems like the subs aren't as loud as they were with my American Bass amp. So I turn the gain up just a little more and start to smell the voice coils again. It is almost like there is a magic area on the gain where I don't smell voice coil when turned up. I don't know it seems like the amps should be doing more than what they are doing. But when I turn …

Jacob, from what I have seen you post in the past couple weeks on the new sub, it sounds like you are planning on making it for more of a ported/spl/ high power app? If so, I have an idea which you may or may not like. I suggest that you make 2 versions of it, 1 for the ported/spl crowd, and another that is totally for the small sealed crowd. I don't know if it's possible to do with the same motor and just a soft parts swap.. call 1 the p8, and one the s8. I have 8 of your e8's and I like them, but wish they had more power handling in a small sealed app. They do tend to bottom fairly easily when you get some power to them, in the recced enclosure. PLEASE, PLEASE, PLEASE, …