Sundown Audio

Hey when are these gonna come out?

I am going to start putting corner pieces in my box as well as adding resin. I will be tracking my gains from these things here. I will do each corner with a 45 degree piece first (ripped 4x4 lumber). I will also try pieces that are cut into an arc (same 4x4 but with an arc cut) to see which is louder. This will be done one corner at a time. This may take a while but I am going to start today. Base-Line score from the end of my dampener log : 155.2 dB @ 48 Hz --- First piece in place - screwed in with tape along the top as that edge was rough: This resulted in a GAIN : --- I tested 49 Hz as well to make sure my frequency did not change - I metered 155.2 dB @ 49 Hz. I al…

ok guys im not sure if this is the right spot, but i am using a sundown saz 1500d. i have a pioneer premier 5000 spl 12' like scott owens used, and i have a show sunday and i need help on a box the box i have now is 1.7 cubes with 12 sq port at 38 hz and the highest i can get out of it is 141 this is how it looks now>>> http://audioforum.termpro.com/topic/35/1446.html now i need help cuz i want at least a 144 to 145 i have a marine battery on the amp like 800ah or however i am supposed to tell you the size im not sure the new box i am planning is 2.5 cubes 40 sq inches @ 35hz any help will be majorly appreciated by the way i am boogie woogie on termpro

Hey guys i am looking to make a sub box for my 15inch nightshade! i don't know really know sub box's esspecially for a subs that will blow ear drums lol!! so i have attached my design let me know what you think and what i should modifie as i want to cut some wood tomrrow and start putting the box together! thanks for your input! Kenneht

Just throwing some ideas out because I want a hat and think other people may as well. This is just a crappy quick photoshop I did to show my ideas, I may make a final copy that blends and actually looks good in the future. Idea 1 Idea 2 Or we could just do the logo without the team above it so anyone could buy and wear it. Feel free to add ideas and discussion.

Anyone Know If They Make Any ? If So Where I Can Order One. Thank You =]

ok so here is what happened when me and a friend got bored with a can of gold paint......

i want to run (once the saz 3500) a 3500. i was wondering what electrical i would need to do. obviously the big 3 but what kinda alternator and batteries would i need? (also will have a saz100.4 for the doors)

I have had my my 3000d since Feb. back when I was pushing a pair(2) of 12'' L7s. I never got hot. Just recently I have changed my subs to a pair(2) of 15'' DD 9500. Now my amp get hot. It went thermal once. I have the gain set at alittle over a half. Bass Boost to zero, Phase to zero, and subsonic all the way down. What would cause my amp to heat up? Do my subs need more power? Am I not giving my amp enough power? I still have a stock alt at the moment(I ordered a bigger alt with 200 amps). Two retop optimas. One has the main starting and the other in the trunk. I already did the big three. Any suggestions would really help. Thanks.

here are the first works on the machine made by us with the subwoofer Nightshade 15! amplified by 2 steg 310.2 (3000watt a-b), await the arrival of saz-3500D 2 batteries 12v Classic sounds very strong and very good, very beautiful and aesthetically 147db measure of media in 30 seconds, given to 40Hz

i have one of my 100.4 bridged on my mid-bass my question is if i hook up the remote gain will it only change 1 side {ch 3/4} or will it change both sides {ch 1/2 and ch3/4} ? i think only ch 3/4 will be changed.

Hey guys, i was just wondering if my stock alternator in an 1998 infiniti i30 will be good enough, its 110a. Also, double checking but is it needed to do the big 3 and also what amp install kit should i get.

Hey I have 2 component sets and a SAX 100.4 with no room to get another amp, is it possible to bridge them both cause I need the extra power so they can keep up with my 18's? maybe double them up or something is this possible? Thank you

hey quick question can you run the 3000ds daily on a 16-18 volt system. i think jacob 4 3500ds on six 16 volts right, do u think that many batteries would be necessary with just the two 3000ds. also I can turn my voltage up to charge such a system.I see that the 4 channel that sundown makes only runs up to 16 volts will it hurt it at like 16.5 17.5. I figured it would just be cheaper to sell my yellow tops and switch to 16-18 volts and get more power from what I have. but I would also need a four channel that can run on such a system. (if there is one) what does anyone suggest.

4 axis 15s in the box I built for SBN in the back of a Yukon XL on two SAZ3000Ds 154+ @ 39hz, enjoy This vehicle will see 4 18's eventually

this is part of my new sq install which consists of a premier 880 prs head unit morel hybrid ovation6 set RE XXX 12 the install inst complete yet but , i just couldnt wait to post it ... any feed back will be appreciated the laser etching was pretty cool to watch ... took about ten minutes and was totally worth it ... cant wait to light it up with blue l.e.d.`s

trying to decide which amp to get to power a fully loaded 15" fi bl in a 3.5ft^3 box tuned to 33 hertz. deciding between the saz 1200, saz 1500 or if i should pre-order a new saz 2000. money isnt really a problem so its just about the perfect pair, any input?

If you want a Nightshade now I have some used motors that I can build with new parts. Shipping within the 48 continental states by UPS Ground included : 12" - $425 15" - $450 18" - $475 Limited supply of used motors so let me know ASAP.

Tarheels Auto Sound Challenge # 3 Sunday May 17th all classes spl/sq/dbspl registration starts at 9:00 AM and closes at 1:00PM. This is a MECA 2x point event . We would also like to welcome NSCSPL to the event as they will also be hosting a show as well. That's right we will be holding TWO shows at once. Hope to see you there.

I'm helping my friend find some e8s and everywhere seems to be sold out, plus it looks like there's a rush for them on forums. What's the deal? Is there just a shortage in production? Update in design? On hiatus? I'm just afraid they're being discontinued.

Alright. I have the amps installed in my car. I have the Rca's wired properly for strapping. Now the speaker connections. I have both subs wired like this. http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=3 Mine are wired for 2 ohms. I have one set of wires coming out of my box. Positive speaker wire is going to my Master amp. Negative wire is going to my slave amp. Do I have them wired properly or am I going to have to wire each speaker to each output on the amp? It just isn't getting loud. I have the output voltage set at 77.5 volts A/C. Could someone show me some pictures of how to wire 2 dual 2 ohm subs up in the strapped configuration? I know…

New Box : 7 cubes with 195 in^2 of port area You can see it is very close to the hatch... this was not as planned - I have to move the amp rack forward to move the box forward. Due to the proximity to the hatch my loudest frequency dropped to 45 Hz (the vehicle actually peaks at 53 Hz) - but it put up a good number anyway! 154.2 dB @ 45 Hz legal dB Drag Style 157.0 dB @ 45 Hz in the kick panel one door open 2x SAZ-3000Ds @ 1/2 ohm and 17.9v 2x Nightshade v.2 Prototypes (the SPL is about the same as the original but these have a higher long-term power handling) I have not done ANY resin work to the box... no corner smoothing pieces... no sanding... nothing like that. So…

Ok, I have 2 FI BL 18's, D2 ohm now with 2 sundown 1500d's strapped. I still have stock alternator battery up front and powermaster d3100 in back. I am getting another 3100 and missinglink module, and think it comes set at 14.4-15.2v. Now I want to add another 18". Should I run both my 1500d's strapped on the 3 which is 1.3 ohms I believe, or sell them and run 1 saz-3500d?

I was just wondering what it is, and 1w/1m, or 2.83 volts? thanks

i got a saz 1500d 2005 chevy colorado and a fi bl 15". i was just wondering for the the power/ground wire, it says its recommended 0 gauge wires. but i have 4 gauge. will it be ok to use it or will it damage the amp and/or go into protection? has anyone used 4 awg for that amp?