Sundown Audio

Any information on the new SAE-1200?

I have my 2 Saz-1500's strapped. I have 2 15" Fi BL subs. They have all the power options on them. Now when I set my gains with the DMM 77.5 volts - 5 volts for my headunit output i get the old smelly subs. Meaning when I turn the volume up i start to smell voice coil. So i turn the gain down a little bit and it seems like the subs aren't as loud as they were with my American Bass amp. So I turn the gain up just a little more and start to smell the voice coils again. It is almost like there is a magic area on the gain where I don't smell voice coil when turned up. I don't know it seems like the amps should be doing more than what they are doing. But when I turn …

Just throwing some ideas out because I want a hat and think other people may as well. This is just a crappy quick photoshop I did to show my ideas, I may make a final copy that blends and actually looks good in the future. Idea 1 Idea 2 Or we could just do the logo without the team above it so anyone could buy and wear it. Feel free to add ideas and discussion.

Hey when are these gonna come out?

Uh oh... what is going on here ? Will be working on it some more tomorrow.

ok guys im not sure if this is the right spot, but i am using a sundown saz 1500d. i have a pioneer premier 5000 spl 12' like scott owens used, and i have a show sunday and i need help on a box the box i have now is 1.7 cubes with 12 sq port at 38 hz and the highest i can get out of it is 141 this is how it looks now>>> http://audioforum.termpro.com/topic/35/1446.html now i need help cuz i want at least a 144 to 145 i have a marine battery on the amp like 800ah or however i am supposed to tell you the size im not sure the new box i am planning is 2.5 cubes 40 sq inches @ 35hz any help will be majorly appreciated by the way i am boogie woogie on termpro

ok so here is what happened when me and a friend got bored with a can of gold paint......

it broke my jeep....

i want to run (once the saz 3500) a 3500. i was wondering what electrical i would need to do. obviously the big 3 but what kinda alternator and batteries would i need? (also will have a saz100.4 for the doors)

Anyone Know If They Make Any ? If So Where I Can Order One. Thank You =]

4 axis 15s in the box I built for SBN in the back of a Yukon XL on two SAZ3000Ds 154+ @ 39hz, enjoy This vehicle will see 4 18's eventually

I have had my my 3000d since Feb. back when I was pushing a pair(2) of 12'' L7s. I never got hot. Just recently I have changed my subs to a pair(2) of 15'' DD 9500. Now my amp get hot. It went thermal once. I have the gain set at alittle over a half. Bass Boost to zero, Phase to zero, and subsonic all the way down. What would cause my amp to heat up? Do my subs need more power? Am I not giving my amp enough power? I still have a stock alt at the moment(I ordered a bigger alt with 200 amps). Two retop optimas. One has the main starting and the other in the trunk. I already did the big three. Any suggestions would really help. Thanks.

i have one of my 100.4 bridged on my mid-bass my question is if i hook up the remote gain will it only change 1 side {ch 3/4} or will it change both sides {ch 1/2 and ch3/4} ? i think only ch 3/4 will be changed.

this is part of my new sq install which consists of a premier 880 prs head unit morel hybrid ovation6 set RE XXX 12 the install inst complete yet but , i just couldnt wait to post it ... any feed back will be appreciated the laser etching was pretty cool to watch ... took about ten minutes and was totally worth it ... cant wait to light it up with blue l.e.d.`s

New Box : 7 cubes with 195 in^2 of port area You can see it is very close to the hatch... this was not as planned - I have to move the amp rack forward to move the box forward. Due to the proximity to the hatch my loudest frequency dropped to 45 Hz (the vehicle actually peaks at 53 Hz) - but it put up a good number anyway! 154.2 dB @ 45 Hz legal dB Drag Style 157.0 dB @ 45 Hz in the kick panel one door open 2x SAZ-3000Ds @ 1/2 ohm and 17.9v 2x Nightshade v.2 Prototypes (the SPL is about the same as the original but these have a higher long-term power handling) I have not done ANY resin work to the box... no corner smoothing pieces... no sanding... nothing like that. So…

Hey guys, i was just wondering if my stock alternator in an 1998 infiniti i30 will be good enough, its 110a. Also, double checking but is it needed to do the big 3 and also what amp install kit should i get.

What "bass knob" does the SAZ use? I REALLY like the one that came with my SAX-100.4 amp and would like to have the same kind for my SAZ. Anyone know?

I'm helping my friend find some e8s and everywhere seems to be sold out, plus it looks like there's a rush for them on forums. What's the deal? Is there just a shortage in production? Update in design? On hiatus? I'm just afraid they're being discontinued.

Hey I have 2 component sets and a SAX 100.4 with no room to get another amp, is it possible to bridge them both cause I need the extra power so they can keep up with my 18's? maybe double them up or something is this possible? Thank you

hey quick question can you run the 3000ds daily on a 16-18 volt system. i think jacob 4 3500ds on six 16 volts right, do u think that many batteries would be necessary with just the two 3000ds. also I can turn my voltage up to charge such a system.I see that the 4 channel that sundown makes only runs up to 16 volts will it hurt it at like 16.5 17.5. I figured it would just be cheaper to sell my yellow tops and switch to 16-18 volts and get more power from what I have. but I would also need a four channel that can run on such a system. (if there is one) what does anyone suggest.

trying to decide which amp to get to power a fully loaded 15" fi bl in a 3.5ft^3 box tuned to 33 hertz. deciding between the saz 1200, saz 1500 or if i should pre-order a new saz 2000. money isnt really a problem so its just about the perfect pair, any input?

Alright. I have the amps installed in my car. I have the Rca's wired properly for strapping. Now the speaker connections. I have both subs wired like this. http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=3 Mine are wired for 2 ohms. I have one set of wires coming out of my box. Positive speaker wire is going to my Master amp. Negative wire is going to my slave amp. Do I have them wired properly or am I going to have to wire each speaker to each output on the amp? It just isn't getting loud. I have the output voltage set at 77.5 volts A/C. Could someone show me some pictures of how to wire 2 dual 2 ohm subs up in the strapped configuration? I know…

Ok, I have 2 FI BL 18's, D2 ohm now with 2 sundown 1500d's strapped. I still have stock alternator battery up front and powermaster d3100 in back. I am getting another 3100 and missinglink module, and think it comes set at 14.4-15.2v. Now I want to add another 18". Should I run both my 1500d's strapped on the 3 which is 1.3 ohms I believe, or sell them and run 1 saz-3500d?

I was just wondering what it is, and 1w/1m, or 2.83 volts? thanks

I have Knu Konceptz Krystal Rca's in my ride and I need a Single Rca to Master/Slave my Saz1500d's together. Anyone know of any nice Rca's to use to make the Single run? If you will post me a link cause i am looking to buy one tonight. I am searching as we speak. The shortest KnuKonceptz has is 13 feet. That is way to long. I am still looking.