Sundown Audio

Im ordering through KNU and im using a cde-102. for powering im using **NEW** Kolossus Flex 0 Gauge Power Kit but for rca/remote and speaker wire i have no clue. I will be using it on a 18" fi BL. Any tips?

As long as I don't let my voltage drop I should be able to strap them at 1 ohm right ????? what is a 3000d rated at at .5 an ohm has any one ever tested them??? plan on runnning four dd 12's 3500 or 9500 at 1 ohm is it worth it??

does anyone know the mounting depth of this sub

I'm planning to run 2 sax-100.2s and 2 saz-3000s strapped at 2 ohms. I have a 200 amp excessive amp alt and i'm attempting to make a bracket so i can also use my stock alt but i'm not sure if i'll succeed in that. Is it recommended to run 2 alts with 2 saz-3000s or would my one 200 amp alt be fine? I'd like to limit the amount of batteries to 1 under the hood and 3 in the back. I'm a little tight on space. Is this alright or would i have to use more? My last system consisted of 2 saz-1500s. Using my 200 amp alt, 1 battery under the hood, and 1 in the back I didn't seem to have any problems at all. Just wondering how much i need to upgrade my electrical to handle 2 saz-300…

We will no longer re-cone other brand woofers. Please do not ask. I suggest the following people / companies for re-cones : David Moore -- [email protected] Nick @ Incriminator - [email protected] FI Car Audio Thanks,

Will they run on a 16 volt setup? I know that there would be no warranty but have to ask.

As the title says... other than the casing what else is different.... guts still the same.....? I'm talking the 07 amp vs the 08 amp... thanks

Now that everyone knows what they can do... I am thinking about opening a special on them to get more reviews on these bad boys. The special would be equal to the pre-sale @ $300 each. Who wants some ?

Will both these amps work on 15+ Volts right out of the box? Thanks,

Just wondering about some power testing results for the SAX series amplifiers. Anyone ever test these to see what they really pushin? Also, I wouldn't mind picking up some equipment to do my own power testing, what would I need to do this?

Jacob, Are your amps rated with a reactive (nominal) load or resistive? In other words, are they made knowing a reactive load will be placed on them in normal use? This is brought up due to the number of "impedance rise" and "I can wire the 3000D to .5 ohm nominal because it will actually be above 1 once the sub is wired to it due to the rise" questions and comments. *I am not trying to single your amplifiers out, I just wanted to know in general and since you're on the forum I figured I'd ask you.

Guy I work with has a bxi2608D, hifonics says it does 2600x1 at 1ohm. Probably doesnt do that much, but he is wanting to run 1 12" or 15" sub. Would nightshade or the z-15 be able to handle that? thanks

i know some rca's dont work when trying to strap amps, so im wondering if anyone is using the knukonceptz karma SS wires to strap their amps with success. these: http://www.knukonceptz.com/productMaster.c...%20RCA%20Kables

Uh oh... what is going on here ? Will be working on it some more tomorrow.

I started running my Sundown 3000 at .5 ohms a little over a week ago, and I figured I'd share my experience with performance in regards to temp of the amp. Subs: 2 dual 2 ohm audiopulse axis wired down to .5 Electrical: 200 amp alt, one kinetik 1800 under the hood and one kinetik 1800 in the trunk. Sealed box, 2 cubes per sub, impedence rises over 1 ohm at 18 hz and doesnt drop below 1.1 ohms after that. Gains on the amp are set with 50volume on the deck as max Before started I took the temp of the amp it was 62 F I started playin music on volume 40 for 8 minutes, then I turned it up to 50 for 13 minutes. Total test time 21 mins. I measured the temp of the amp again: The…

Pre-Order open as of now - be sure to get these while you can as I think the first run will go quickly. ETA is mid to late June for arrival of these woofers. As always, with a pre-order the ETA is subject to change based on shipping delays, etc, etc. PLEASE do not pre-order unless you are okay with any delays that may occur. Regular MSRP will be $239 dollars - right at our low 200s target Shipped prices in Continental 48 states -- contact me for AK and HI -- USA ONLY pre-order! Paypal me at [email protected] to pre-order. $175 shipped for ONE $330 shipped for TWO $620 shipped for FOUR Ask about more than that. Two of them in my Jeep has done up to 149.7 dB in …

Nightshades are out of stock -- updates will be posted when they are available again.

We did pretty good this weekend, here are our scores: Jeremy McCord 2 3000Ds and 2 15" Nightshades Drive-by 4 - 1st place with a 129.8 Mod 3 - 2nd place with a 148.7 Drive-by SPL best of show Corey Mitchell 1 1500D and 1 12" PBX Street 1 - 1st place with a 143.3 Drive-by 1 - 1st place with a 117.3 PHAT 12 award Derek Jackson 2 1500Ds and 2 12" Nightshades Street 2 - 1st place with a 148.6 Josh Newton 4 1500Ds and 8 15" MA Audio XLs Mod 4 - 1st place with a 155.0 Drive-by 5 - 1st place with a 126.? (I will edit with the exact score) SPL Best of show Here are links to the pictures and videos: http://www.carlisleacoustics.com/albums/th...ls.php?album=46 Corey's Drive-by Run …

okay I can get two 2000s or one 3500 which would be better for two upgraded nightshades? thanks

Don't mind the title but it made you look.. Well I must say my sundown is GREAT, my pioneer SPL 12" D2's sound great but was lacking in bass race today. So am pulling them back out ( I just got them in yesterday ) and want to run 2 15" so I can get the numbers I am looking for 145+ run in 139.9 class, but my problem is do you think 2 FI BL's D2 on a sundown 3000 at .5 ohms before rise would be ok or is that going to be to much for the BL's for a 30 sec bass race run? If the 3000D is to much for the FI's I have would one sundown nightshade D2 with upgrades be better. I am sure the 2 15" BL's would be louder right due to cone area. Reason I am thinking the BL's is because…

hi guy i'm looking for a little help here i have a 94 eclipse running one nightshade 15 d1 and a saz 1500d i am trying to get this thing louder as i know it can with my current set up it does a 143.8 at the head rest and a 121 drive by the box that i have now is sub up port up at 4 cuft tuned at 40hz here is the demention for the box 24h 31w 15d it pretty much the max i can get in the hatch area as it hits the back glass if any one would be willing to help with an design it would be great as i can build them just not so good with the design and tuning part

Went to Diablo's house today, to check on the woofers he had come in since he can't........ muwhahahahah

Well since I always see so much talk about new sundown products, figured I might as well throw out the possibility of full-range coax and or component speakers. I would def. be more interested in the component speakers, especially if individual drivers designed for active or custom built passive x-overs.

I have had single audiopulse axis dual 2 ohm sub wired to my sundown 3000 at 1 ohm. I was going to get a second sundown for my second axis. but recently testing the power and impedence rise charts with my wt3 woofer tester, i found that my impedence rise is going up to 3 with the single axis. so ive only gotten about 2000watts with lots of clipping. After i noticed that i put both axis's in a sealed box with them wired down to .5 ohms. i clamped it today and took an impedence curve and its raising to about 1.1 ohms now. i got about 2300 watts before my voltage dropped too low where i didnt want go continue, and no one was here to rev the engine. So this brings my questi…

hi all i have a sax 100.4 and a saz1500d ... i want to change my install a bit ... do something a bit more visually appealing now in the pics below ud see one of the amps " floating " in the center ... i want to do a symmetrical pair like that the lower board will have a small fan and it will have gaps in the board exposing the heatsink a bit so now my questions 1 : has anyone ever installed their sundown amps in an area with minimal ventilation and did it have any issues ? 2 : do you think the setup will have adequate cooling ? 3 : what improvements do u think i can make?