Sundown Audio

im looking for a SAZ 1500D. prefer old heatsink (to match my other sundown amps). must have pics to show condition of amp.

Jacob, any chance of us seeing Sundown home audio amps in the future? I know you make some great bang for the buck car audio amps and I'd love to see that carried over to the home audio side of things.

I am a new Sundown Dealer and I have been seeing great results w/ these woofers. BUT...the lack of mounting information is really hurting my leeway to fully expand my designs in limited space builds. I see that mount depth is listed most subs, but motor diameter would REALLY help also. probably an unreasonable request (just wishing) but a google sketch-up model of the subs would make my world exponentially better I just finished an install today w/ 2 SD-2 10's in a '97 ext cab chevy (sealed ~.6cuft each, customer loved it, great low-end response) and I "called" the SD-motor diameter ~7". After crunching some #'s, I figured that I can build a SICK budget setup w/ a sin…

Build this ABC box like 10 years ago for 2 JBL GTO 8's and I am curious if it will work with 2 1st Gen Sundown E8's 1st chamber .90 cubes 2nd chamber 1.8 cubes all 3 round ports are 10"x3" both subs will get around 400 watts each Thanks in advance

Currently I have plans for a box with these specs: Net Volume: 2.5 Tuning Freq: 32 Port L: 34.5 Port H: 16.5 Port W: 2.5 Port area 41 inches Port area/cubic foot 15.88 It's a sundown X12 dual 2 ohm paired with my SAZ-2000D. It's going a 2000 F150 with the sub and port firing upwards. I plan for a double baffle. Will I have enough port area and does that seem like a decent box? Here's the plans and pictures: http://imgur.com/a/9zqJN I'm planning a H/O alternator most likely mechman 240A or 270A. Does this look okay?

I got a new puter and lost Jakes number. Can someone pm it to me?

My SAX-125.2 has completely stopped working. I took a look at it today and it just stalls into protect. Inspected the inside and nothing is blown, however I found 1 fuse blown and replaced it with the same amp rating (20amp) and it is still in the protection loop. The amp was fine until aprox a week ago it would randomly turn off for a second then pop on. There was also a very high pitched sound coming from presumably the amp. any ideas?

I will be leaving on the 25th and coming back on the 30th. I will answer some e-mails while I am gone -- but most likely not all of them, it is supposed to be a vacation after all. Brandon will be at the shop Monday - Wednesday while I am not so he will handle as much as possible without me being here.

I was planning on a upgrade in the near future. i was thinking about running 2 Fi BL 15s fully loaded on eather a sundwn 2500 or a T2500.1bdcp? these two amps are sick.. i like both.. i like that there underrated and probly get somre in the 3000 or a little more... but i like both... im just undecided... can somone toss in there 2 cents on my topic?

Hmm. How can I gain 3db's by Saturday.

Got a SAZ-1500D from Jacob today. Can't say enough about the fast shipping on this , payed for it on Sunday and got it today. No visible damage, packed and recieved in fine condition. Thanks. Now for the pics The one that came today, And how about a pic of the twins reuniting,

Hey guys I have started a new build and have been taking some pics along the way! so i thought now it was about time to share some pics of what i have thus far! at any rate please let me know what you think, if you see something out of place please ask! this is also my first time building a box like this! it was fun! kind a lol. other then that I will be sending my 2 motors out for a 12inch recone some time very soon! I will share pics of my shipping box's (tomorrow)! I hope you guys like them!

Car is a 2000 Altima with 2 HD315's forward firing. Picked up 2 more 1500D's for a song, so I threw them in so both pairs are strapped at 3ohms. Box is 8 cubes tuned to 35Hz as it sounds best for the music I listen to, meaning anything but new rap. It's just a daily driver that sounds very nice, but can get pretty loud also. TL at the headrest I did a 147.1 @ 31Hz which I was told is decent for a trunk car. I was pretty happy as it's far from an SPL car as I run a decent active front stage and dial the subs back 99% of the time. Couple of SQ guys at the get together took a listen and were quite impressed with how it sounded with the subs off and then dialed up to just bl…

I have no direct Sundown experience, I have read a lot of good things and I'm here to see what they have for my application. I have been researching amps for my newest upgrade from 10s to 12s and I wanted to get some suggestions. I have two 12" Cadence SE Solo Beast DR subs dual 2 ohm vc, 600 wrms / 1200 peak per sub. I would like to be at about 600@4ohms and 1200@2ohms if possible so that if I choose to I can run only one sub at a full 600wrms and potentially upgrade subs in the future. Sure I'd like to say that SQ is all I want but, not in the trunk, SPL is what a sub if for IMO. I would like to compare actual numbers, for example, I've considered only 13.6-13.8 volts …

Merry Christmas to me, Thanks Jacob she's beautiful cant wait to get her up and running.

Heads up to everyone about our schedule. Most of the guys going to Slamology will be leaving on Thursday to head up there. I am leaving Friday morning. We will have a booth to show our products at Slamology; we will also be giving out signed posters with our new company model -- if you want to see you'll have to attend Slamology or wait until afterward All of the guys attending Slamology will be back to work on Tuesday *except* for me (**). Limited staff will be at the shop the entire time -- we will not fully close the shop at all but operations will be severely limited Friday and Monday around the weekend of Slamology. ** - I am actually taking a family vacation th…

Subs are wired together at 2 ohms. I have 2 sundowns running, 1 amp for each. The subs are both seeing 2 ohms and putting out 1600 to each sub. Which output terminal do I put the speaker wire in. Left or right. It says for 1 sub its right, 2 its left, but the amps are not strapped. Help?!?!

I have 2 1500s coming to me and before i install them i want to make sure that my electrical will handle it right now i have a stock alternator on my bravada (blazer if you will) pushing ~110amps and 1 yellowtop optima my plan was just to replace the stock alt with a 300 amp one but seeing as these amps can be run at a higher voltage than 14.4 i was thinking of doing dual alts and running 16 volts on a 300 or 200 amp alternator (whichever is reccomended) and have a seprate battery in the back I would like to get as much power from them as possible so i will most likely strap them @ 1ohm (i know its not covered under warranty) I just need to know how big of an alternator…

Specs where provided from an old friend whos been doing SPL and bandpasses for a long time, just wanted to see some other sundown people input, maybe sean will poke his head in here. The specs I was given was 5.7cuft 1:1 50sqin of port area 8" long. After the suggested BP design I "tried" to mock one up in sketch up. I probably got this all wrong but here is a picture of it with some area's left out to view the measurements. I shortened the port based on 1 shared wall, the way I got the length of the port of 5.25" is that I calculated the box like a standard ported box with torres calc at 50sqin 8" long, got the resulted tuning, then changed it to 1 shared wall, accountin…

Has anyone actualyl done power testing on the 100.4? I really want 125 watts x 4 rms but I really want a sundown amp so just curious what the 100.4 really puts out? Thanks

im fitting my FiQ 15 bp and sundown saz 1000 this sec its 2.3^3 box sealed, was just wondering a rough guide line to set my LPF, Subsonic, phase at? listen to rap, thanks

First off, this doesn't seem very mono block to me (tis a two channel amp), but anyway... Could someone explain to me how you would wire up a single SVC sub? The diagram on page 5 shows bringing a line to both power outputs on the speaker positive connections, and no line to the negatives at all. This doesn't make any sense to me. Do you link the two negatives together, and run one positive to the speaker's positive, and the other positive to the speaker's negative?

THIS IS A VID OF THE NIGHTSHADE PLAYING MUSIC WITH THE METER IN ANOTHER CAR (6FT AWAY)...AND A HAIRTRICK IS IN THERE NIGHTSHADES FTW!!!!!!!!! 80

Just wanted to post up our team's results from this past weekend. Jeremy McCord Two 15" Sundown Nightshades and one Sundown 3000D on 80 amps of fusing. Drive-By 2 1st place with a 124.6 Drive-By best of show with the loudest Drive-by score of the day. Corey Mitchell One 12" PBX XS and one Sundown 1500D on 60 amps of fusing. Drive-By 1 1st place with a 120.4 Phat 12 award for the loudest system with a single 12" sub. For everyone that does not know, this is metered on the Termlab doing a 30 second average with the meter 6 feet outside of the vehicle. I did not get any pictures of the show because of the bad weather.

i went to ssa store and it says the preorder for the saz 4500 is 1100 dollars has that changed ,and does anyone know what the price would be arond the end of january thats when my money comes in?