Sundown Audio

im looking for a SAZ 1500D. prefer old heatsink (to match my other sundown amps). must have pics to show condition of amp.

Hi everyone, been a loong time since i last posted, but here i am.....with my 1500D that likes to blow 80amp fuses at 2 ohms in my 98 jimmy. this problem happended months ago, but i just never really got around to fixing it.....running my mrd-m501 in the exact same setup without 1 problem. I tried emailing jacob a couple weeks ago about possibly sending it in to get looked at but i didnt hear back from him, so one day i said **** it and took it to an electronic repair shop who benched it and said "this thing has all kinds of problems, its pulling current like a mofo" or something along those lines.....said it almost blew his 15 amp breaker or something....i dunno...im not…

How do you become part of team sundown? Always wonder'd.... Of course you have to have something of sundowns to be apart, but is it jus simply that or is it more?

I am thinking of dropping my two 8W7's for one IDQ12. If it's a 2ohm sub, can I use one of my 125.2 to power it? How would it hold up (and how much power) bridged at 2 ohm?

Coming back from a snowboarding trip almost home and system shut down. Fuses are fine but amp is not turning on. Light is not turning on the amp.

well my 3000d just arrived and i looked on the forums and i wanted to wire my RE XXX to a 1 ohm load. well i've never wired up a monoblock with 2 outputs. so should i wire each 2 ohm coil parallel to each output or run both pairs to the terminal cup then to the sub?

Got a SAZ-1500D from Jacob today. Can't say enough about the fast shipping on this , payed for it on Sunday and got it today. No visible damage, packed and recieved in fine condition. Thanks. Now for the pics The one that came today, And how about a pic of the twins reuniting,

Great customer service. The Distibutor *edit(delivered) the amp of right at my door. Needless to say I am one happy customer. But and a Big BUT there is a black mark on my power terminal ??? I know it is possible during the connection of the amp while testing but is this something I should be worried about? I will install Friday and if it works then I suppose i would be happy yet again, but im just worried if it may cause problems down the line.? is this something to be concerned about?

Picked up my new SAZ-3000D from my local dealer, Travis / High Decibel Audio in Delray Beach. Now all I gotta do is build like a crazed mofo !! Here are pics of the new toy next to one of my SAX-100.4D's. Gotta love the rubber floor mat !!! Big Brother and Little Brother, I don't know why, the camera just didn't want to focus on the tops of the amps. Crossovers Speaker and Power connections Amp Guts More Amp Guts Even More Amp Guts

SENDING AMPS IN WITH JUST THE COSMETIC CARTON IS NOT OKAY - NOT EVEN IF YOU WRAP IT WITH BROWN PAPER OR A LAYER OF CARDBOARD. </rant> Seriously... I don't pack them inside another box for my health. You MUST have the extra padding on the ends. MUST MUST MUST. UPS / FEDEX / DHL / USPS WILL DAMAGE THEM. http://www.sundownaudio.com/warranty.html "In the event of shipping damage due to improper packaging of the return the customer is liable for the cost of all damages, necessary repairs, or replacement. Be sure to properly pack your return!" Okay, I'm done for real this time

hello Jacob, I my nightshades blew on me. I was pushing them with an IA 40.1 @ 1 ohm no bass boost and gain set properly, however, I don't want to change my amp so I want to upgrade these to handle the power. I need to know how much it will be to have these two reconed with more spiders and longer coils. They are dual 1 ohm 15's. Please let me know because I want to get this done asap have the money on hand and getting ready for a local comp. Thanks.

Well, after ordering a SAE1000D from Db-r my boy couldn't wait to do the car he would like to call his (of course I make the dang payments). We mounted a Pioneer Premier head unit. Clarion Pro Audio 4 channel amp Alpine components in the front doors an ancient MTX 3 10 inch sub box and the Sundown amp. I ordered 4 E8's from Mike and when they get in it will be either order a box or build one. Still need to get some loom to neaten up the wires but not a bad little install for 3 hours work. I have got to say the Sundown is powering the MTX box well. The box sits at 4 ohm so the output is around 300 watts. It hits hard! When we installed the stereo last Sunday, I did everyth…

I am getting ready to buy the sundown 100.4 amp and I have never done this before, but really want to try it. I am going to run the tweets of two channels and the mids off the other two channels. How do I set up the crossovers to do this? I know this may be a dumb question but I have always had external crossover's and want to run this way. Please help.

What is the phone number to contact sundown audio? I have looked on the website and on this website and in my owners manual etc. and i can't find it.

Well guys I finally did it. I broke 150db. I got a 150.7db @ 36Hz in the passenger kick with a TL and drivers door open. USACI Modified 1001-2000W Vehicle: 2002 GMC Envoy Subs: (4) Phoenix Gold Ti12d Elite Box: 11 cu ft @ 28Hz behind "C" Pillar Amps: (2) Sundown SAZ-3000d stapped using a Maxxlink @ 2ohms HU: Pioneer DEH-P940MP

Anyone trying to call me my phone IS NOT working at the shop. AT&T is taking their time fixing it... I've had no dial tone since last Tuesday afternoon. I was gone most of the time and was hoping they would fix it but hey have not... have called several times today from my cell with no results yet. Apparently I have to pay outrageous pricing for "commercial grade" service but they have all day to fix my problems.

Jacob or whomever can answer, The dustcap came off one of the E8's my boy is using. What glue should be used to fix it? How long should it dry? As an added note, the box for my boy is finally built. Going to paint it this spring but he is going to use it untill then. It has been hooked up @ 4 ohms for a couple of weeks. We are going to hook it up @ 1 ohm today. I am going to video his first impressions of it.

wondering if its possible to only use one input when bridgeing a 100.2? i know alot of the oldschool stuff i used to run you only needed one channel (usually the right) when bridgeing. the reason i ask is because im going to run two bridged 100.2s as a stereo pair and would like to avoid any funky Y-splitters or anything like that.

Hi Sundown or whoever can help me. A few questions. What is the main differnces between the new and old amp? How long can a amp be in a shop before it go's bad. The thing is; they dont sell any of these amps as most people here are into SQ. Im just worried I buy the thing and it gives me troubles.

Went to local stereo shop, they bought a new termlab meter. I played 36-42hz tones and peaked at 36 hz with a 147.3, did 147.1 playing lil jon (throw it up). Need to do alot of deadening on roof. Running 2 saz-1500ds strapped on 2 bl 18s. The sundown amps are the best amps I have owned, may get 2 more. Voltage dropped down to the 12s. SUNDOWN AUDIO. Also met Justin Adams who is Sundown rep for alabama, very cool guy.

My car is currently in the shop awaiting repairs from the recent break in. Since I have the time and I have not posted on this forum before, (I think) I was just wondering how you guys feel about these little guys. Should only need 6 cubic feet net ported, and have almost the cone surface are of (4) 15s Just considering something different for a good sounding daily that will drop low and get fairly loud. Power would be from a 3000d of course. Almost forgot car is a 2004 Ford Crown Vic seen here, old setup, just to give you an idea of how big the trunk was, that box was 4 cubic feet net tuned to 28hz I would have to do subs and port up, but I did that with my single RL…

Congrats to CnJ autosound one of my dealer in the philippines for winning first place in several competition. FI BTL 12 with an enclosure tuned @ 39 hz powered by 2 Sundown SAZ1500d strapped with 2 powermaster xs3100 Surprisingly did a 146.2db sealed on dash and the cd played is lollipop by lil wayne.

Revised my winter rebuild plans for you guys. These are set in stone now and all my calculations for airspace and port area have been tested with the old drivers. This should give everyone an idea of what is going in. Car is getting a motor rebuild, transmission work, and suspension work done for the weight that is about to go in it right now (this should be most of Winter). I Can't guarantee a time I will release it. My hybrid 18" TC5200 Drivers will be here in a week!

ok well im getting all my stuff togather to start glassing the doors...... i got my mdf rings in today.... i pulled out a E8 to check the fit... it is perfect! but! see here....... a e8 its all free and open right near the gasket.... 1 MDF ring...... see how it closes off some of the free area near the gasket..... lets see two rings. it seems to close it all off..... am i gonna have a problem with choking the sub??? thats my first question... my second is.... im gonna be running these 2 8's for mid bass...... what amp should i use to really power these big boys? i currently own a 100.4..... but if you feel i should pic up another amp i sure will jacob than…

i just saw someone mention a amp of this size when is this being released or is it?