Sundown Audio

First time posting here, but have been reading up on Sundown for the past few months and have like everything I've read so far. So a month ago I purchased two brand new SAZ-3000Ds and they are strapped together to make a 6000W monster. Well I was trying to do some no load gain settings like I have done in the past on other amplifiers. I have three Powermaster D3100 batteries with 1/0AWG cable between each as well as 1/0AWG cable for Pos and Neg to each amplifier. Also I have double runs of 8AWG between each amp as well. I set all controls for both amps to zero connected my sub out RCA from my HU to the master amp and the BR out to the BR in of the slave amp. I place…

I got the NS18s today and one of them has a broken basket Ive got pics uploading now Ill put up here as soon as they are done. kinda pisses me off cause the package looked perfectly fine no evidence of problems

I'll be making my new box shortly with 4 Sound Splinter Signature RL-p 12". All 4 are D4 ohm giving me a final load of 2ohms for the amp. I was wondering if I should maybe trade the sundown 3000 for 2 1500. This way I could run 2 subs at 1ohm to each 1500. I "think" my other option is to run the 3000 at .5 ohm, but I don't know if that's a smart thing to do. My electrical consist of a 200 amp alt, 2 yellow tops, 2 runs of + 0awg, and 2 runs of - 0awg. What are your thoughts? I'm kinda at a lost right now, lol.

Tarheels Auto Sound Challenge # 3 Sunday May 17th all classes spl/sq/dbspl registration starts at 9:00 AM and closes at 1:00PM. This is a MECA 2x point event . We would also like to welcome NSCSPL to the event as they will also be hosting a show as well. That's right we will be holding TWO shows at once. Hope to see you there.

Currently I have plans for a box with these specs: Net Volume: 2.5 Tuning Freq: 32 Port L: 34.5 Port H: 16.5 Port W: 2.5 Port area 41 inches Port area/cubic foot 15.88 It's a sundown X12 dual 2 ohm paired with my SAZ-2000D. It's going a 2000 F150 with the sub and port firing upwards. I plan for a double baffle. Will I have enough port area and does that seem like a decent box? Here's the plans and pictures: http://imgur.com/a/9zqJN I'm planning a H/O alternator most likely mechman 240A or 270A. Does this look okay?

Just wondering what the output would be on the SAX100.4 in 3 channel configuration on a 2 ohm load. Looking at powering a set of 2 ohm 6.5" comps and a DVC 4 ohm 12" sub. Thanks

The new NS v.3 15" woofer powered by 2500 @ 1 ohm pushed all the way into audible clipping. No sweat for this bad boy :thumbsup: ORIGINAL THREAD : Car Audio Classifieds ----------

People here in SC have never heard of Sundown Audio and after seeing my scores they ask about them at every show. The basic questions are where can I buy them and what all kind of products do they have. I try to explain as much as I can but it gets really time consuming doing that over and over. Its also tough without any visual references and specific information on hand. Do you have any type of brochure or product cards that I could hand out to people? We really need a dealer here in SC. That way I could direct people there. Right now all I know to do is send them to the website.

hi guy i'm looking for a little help here i have a 94 eclipse running one nightshade 15 d1 and a saz 1500d i am trying to get this thing louder as i know it can with my current set up it does a 143.8 at the head rest and a 121 drive by the box that i have now is sub up port up at 4 cuft tuned at 40hz here is the demention for the box 24h 31w 15d it pretty much the max i can get in the hatch area as it hits the back glass if any one would be willing to help with an design it would be great as i can build them just not so good with the design and tuning part

just wanted to wish everyone a merry christmas and a safe new years!!!ill be getting my x-mas gift after christmas!!

I hit a 131.7 with one sa-8 in a .75cf box tund to 32hz of a rf 500.1 I cant rember what song I played it is in a 06 chevy equinox and I did beter then some of the people with a par of 10's and single ported 12's I feal bad for the kid with the aq hdc3 12 off 1000+ wats he onely hit a 128.6 but his was in a reg cab truck with the sub facing the frunt and the port facing up betwing the seats

Hi Jacob or anyone who can answer this question is the NSQ a reality or still a sub that is in the prototyping stage? and if its a sub thats made to order whats the price and lead time on this beast and what kind of power should it see for daily use?

So an interesting project came my way... a client asked me to try out some of the NeoPro speakers for Guitar purposes... which I have had a few folks try them for bass guitar and like them but not regular electric guitar. Client comes back to me stating the NeoPro drivers are entirely too clean and then lends me an old vintage speaker that he considers the "driver to have" for this application -- which is tube amplifier electric guitar. So I analyzed it a bit... and came up with this : * Ribbed, thin paper cone with very small dust cap * Actual paper surround - one piece with the cone * Low excursion spider with completely un-vented frame * Un-vented motor Many of the…

Shannon Lee(Twisted Mayhem) Amp(s) - 4 Sundown 1500d's Sub(s) - 2 T3 TNSF 18's Modified 5 - 149.7 dB - 1st Place Jason Drinkard(Twisted Mayhem Amp(s) - 1 Sundown 3000d Sub(s) - 4 T3 TSS10's Street 2 - 149.8 dB - 1st place SPL Best of Show SPL Phat Truck SPL Phat Install Todd Mayton(Twisted Mayhem) Amp(s) 2 Sundown 1500d's Sub(s) - 4 T3 TS12's Amatuer Street 2 - 145.9 dB - 1st Place Drive-by SPL 3 - 121.9 dB - 1st Place Christy Gambrell(Twisted Mayhem) Amp(s) - 1 Sundown 1500d Sub(s) - 1 RE MT 18 Modified 1 - 143.3 dB - 1st Place TEAM HBIC Female Best of Show SPL Phat 18 Also Team Twisted Mayhem took home Team Participation Award.

I have a set of cd1e horns and need to tune this amplifier down. The horns are 40 watts each @ 8ohm. What should the output voltage look like from the amplifier? Does this sound right? E^2/R = W (W*R)^(1/2) (40*8)^(1/2) ~= 17.89 volts

I have it powering 2 speakers in 2 channel mode bridged. One speaker is on channel 1 (Positive) channel 2 (negative) One speaker is on channel 3 (Positive) channel 4 (negative) RCAs: One line to channel 1+3 (using Y-splitter) One line to channel 2+4 (using Y-splitter) It seems to be working fine, but I am unsure about RCA connection, Did I connect it right? From what I've read, if in bridged mode, then all RCAs need to be filled via Y-Splitters. If I have it hooked up as 1+2 and 3+4, then only 3+4 will play (this is coming from the MIDS input of the HU as I am using the 4 channel to power my mids in bridged mode)

The Dual-2 SA-12s will be in stock shortly... likely within 7-14 days -- along with the second shipment of the Dual-4 version. I've had alot of people anxiously awaiting the Dual-2 version so I thought I would let everyone know

Sorry guys - backed up again. I am going to let everyone in on why that is : 1) My e-mail volume in 2009 *so far* is two times higher than what I got in 2008 all year long. 2) I have been in the process of buying a new home for several weeks now, this takes up alot of time. 3) As many of you know I have a son - he is now 8 months old - so I can't do much e-mail at home these days. 4) Flu season came through... I got sick after MECA finals, that took me out of work completely for a day and slowed me down for a few more. 5) We are busier than ever - and I do alot of other things besides e-mails. Lots of new things in development... uses up alot of my attention and time. All…

Has anyone used a Nightshade B Stock??? Is it worth the defect for the price or is it better just to go new?

Just a quick question on the Saz 3000d is it a MINIMUM for a 300 amp fuse or is it it MUST be a 300 amp fuse? Thanks, Julian

whats the rms on the zv.2 subs? also whats the recommended box and tuning on a 12" and 15"?

It was delivered yesterday to my work. I opened it up today. It. is BEAUTIFUL!!!! Sure, it is used (I bought it from Jacob's resale link.), but in great condition. Comes with the 1 year warranty and the remote gain adjust. I can't wait to incorporate it into the system I am getting ready to install in my car. Jacob was fantastic to deal with. He talked me through a paypal transaction. Just to not sound like a dumbass I had never done that before. He shipped it fast before he left for the CES. I doubt I get it in the car for a while as the doors have to be done/deck installed. Plus I have to find a place for it. Anyway, all of the stories regarding the customer service of …

Im about to purchase 2 of these amps Just was curious if they have an unregulated power supply. Also was wondering as to the general difference, if any, between the SAE series and the SAZ series as may upgrade to a single SAZ-3000D in the next year or so. Any helpful reviews of this amp would be awesome as well:D.

I Just Ordered A 100.2 Amp From Db-R I Know it says there is a 7-10 day lead, but how long would it normally take to get an amp to Houston Texas ?

The site just got a ton of great new product photos for all the new amps, submit forms for rides and reviews and the front page got some updates. Enjoy Sundown Audio - Sundown Audio - Quality Mobile Amplifiers & Subwoofers