Sundown Audio

Has this amp been tested at 8 ohms? Does anybody have any experience doing this? If so what does it put out?

So I bought a SAZ-3000d from db-r last december. I finally got to hook it up today! It turned on, sub wouldn't move, then the amp would go into protect. The btl was wired at one Ohm. So after reading the manual, I disconnected the speaker wire and the amp did fine, didn't go into protect mode. So I re-did the wiring on the sub but before dragging it out to the car, I decided to test the amp. Turned it on and the Blue power light came on and about one second later it switched over to protect. Needless to say I was astonished. The wiring is done as so: From battery plug in of amp to 300amp ANL fuse, from fuse to + battery, from + battery to another 300 amp ANL fuse, from t…

i was about to purchase 2 saz 3000d's when i realize the shipping weight was 2 pounds....does anyone know why this amp is only 1 pound....is that correct?

so here's my dillema. i bought 2 sa12s after hearing my brothers friend erik talk about them on and on. they were on ebay and i got 2 fro 200. sorry im ballin on a budget. so when i decided to buy my amp i guess i lost my mind cause i bought to big of an amp just because i could and the price was good on db-r. was originally gonna run the 12s in my civic but its kind of ugly right now and just bought a pair of 23s for my tahoe so i might as well put the system in it. if I were to run 3 or 4 dual 4 sa 12s what would this amp put out at 2 ohms or 2.667? it will be a sealed enclosure cause i dont think i can fit a ported enclosure behind my third row along with an extra ba…

Hey everyone...im getting 3 saz 3000 d's and it says that the 300 amp inline fuse is not included....where do i buy it at? ThNks, Freddy

Just a quick question on the Saz 3000d is it a MINIMUM for a 300 amp fuse or is it it MUST be a 300 amp fuse? Thanks, Julian

I just got my Saz 3000d in and it popped a fuse, but first it went into protected mode, i have 1/0 wire going to the battery and a big 3 done in 1/0 weird thing when it popped i was doing about 13v then protect, then pop. idk what happened no shorts seem to be prevalent i dont know

Hello guys, i have a question about properly powering my saz 3000d. Right now i am running 3 group 34/78 yellowtops. One of them has a dead cell so i am going to remove all of them and redo my battery bank. Under hood battery is a redtop group 34. My total rms wattage is around 3600 watts including my mid amp. I've been searching google all morning looking for a straight-forward answer to this question. I havent found any real answers just mostly suggestions. this is a daily setup so reserve capacity is the key here. I have been looking at the xs power d3100 but i dont know if 1 will be enough or do i need 2? Also, i have a 270a mechman alt, all big three upgrades and dua…

okay i have some questions about the output, with a 1ohm load + box rise (lets say 1.5ohms) with the proper electrical would i see 3000+ watts without clipping?

Picked up a pair of 3000D's. Will be powering 2 DVC 4 ohm subs. Would there be any benefit of strapping and running a pair to 4 ohms over running just a single to 1 ohm? Output? Efficiency? etc? Any thoughts?

Would there be anything wrong with running the 3000 at .5ohms DAILY? Thanks,

hi i cant decide whether to take a 3500 or a 4500 for one 18 btl. ill use the setup for daily drivin but i also want to be loud as hell. which battery upgrade do you recommend? is one d3100 enough?

Well im a big fan of Sundown and recently aquired a 3000D now im using one of the clasic Opti AMps and might be able to sell and was considdering saz 4 channel. Neetless to say if they keep doing what they are doing ill never buy a different branded Mono but my question is about the 4 ch Ill be using it to run active so crossover points not that important but being loud and sounding clean will be. It will be the older labeled model but it will still be un used. IDK if that makes any difference

my bad i put my last one under ssa antone know when the saz 4500 comes out?

I would like to bay two speakers Nightshade 12 v.2. need amplifier and I don't know what's better. One SAZ-4500D or two SAZ-2500D Only SPL not daily. i already have power Powercell 3000 (95 Ah - 4400 A SC) stret Nw competitor poz. Tomek Barbus Team Poland

does anyone know the price of the saz 4500 after sales well towards february?

i went to ssa store and it says the preorder for the saz 4500 is 1100 dollars has that changed ,and does anyone know what the price would be arond the end of january thats when my money comes in?

I was at a show this weekend and was gonna meet up with a friend up there. When I got there, my friend and his friend were working in the trunk of his car on his amps. I asked what was wrong and he said that his amps were clipping, so he was unstrapping them. Then he said that the Sundown amps perform better unstrapped. He had them strapped at one ohm, and unstrapped at .5 each and said they do better unstrapped...I'm not too sure on his electrical by the way. So my question is, is what I was told true? Thanks.

jacob, i sent you an email about this, but you're stacked up on those. can i get a set?

Im just looking into buying a sundown amp for my truck soon.. i already have a SAZ1500 for my other vehicle and ive heard nothing but good about those.. cant wait to get it hooked up here soon.. but i see the SAE1200 is the same price as the SAZ1000 ... what is the difference between these 2 amps? i know the rated wattage but what else is there? is the sae lacking a few things? just very curious.

I got a Saz-1000 in the wife's car runinng a Nightshade 15" V1 @ .05 . She does really well in Streetspl 600-1200 watt class (141.7 center of dash on music). There are a few people running the Aq-1200 and they give her a hard time and we where wondering if it would be a worth the extra money to go to the Sax-1200. We want to keep her in that class so we can't go with anything bigger then 1200 watts. And being a Team Sundown Member I'm not willing to put any else in her car but Sundown. Has anyone clamped the power of the 1200? Is there a a head to head test of the two?

my friend has 3 single voice coil 4ohm pioneers and he asked me what would be a good amp and i recomended a sun down SAZ-1000 but it would be ran @ 1.33 ohms on around 12.9 volts. each sub is 400 watts RMS so thhats 1200 watts RMS. i was wondering if anybody could tell me about how many watts the sundown would put out under these sercumstances. i dont how much extra power the pioneers could handle so i would like the RMS a lil bit lower then 1200 just to be safe. they r also a few years old.

I have a freind that claims to be a Team Sundown member who says he can get a SAZ-10000d. I told him I've been reading the forums and the newest amp your working on is the SAZ-4500d and he must be confussed. He was drunk at the time and wouldn't listen to me. So my question is, are you really working on a SAZ-10000d or is he just a drunk idiot?

I'm seeing the sale, and I want to pick up another Sundown amp. I seriously don't need a new one right now, but those prices are just to good. I currently run the SAE-1000D to my Mag v3 and I'm happy with the little black amp. I see no reason to replace it. But I am curious, how different is the SAZ-1000D compared to the SAE-1000D? I read about the SAZ being more bulletproof than a SAE but, I'm don't really need to push my amps to their limits. Is the SAZ slightly underrated? (your 1200D amps comes to mind). Now I have 20 more days to decide.

i wonder if the SAZ-1000D would be a good amp for midbass at the moment i'm running a 100.4 for mids/highs and the 125.2 for the midbass now i wanna get 8 (4 in each door) SPL Dynamics HF6.1 for midbass, but i don't think the 125.2 will have enough power for 4 per channel so i thought about going with 2 SAZ-1000D anyone tried them for mids yet?