Sundown Audio

Does the new heatsink on the sax-100.2 look the same as the SAE-1200D? Just curious because I thought it would be all black but the one I got today from db-r wasn't.

Well currently I have no room in the back of my SUV. So the only option to mount the amp is on the box. My box is subs up port back. I have room on the top to mount the amp. I put a couple coins,keys, and other chit on top to see how bad it vibrates. It definetly vibrates, but will it be bad for the amp?

My 100.2 was pushing a set of PG RSD's until the passenger side mid and tweet stopped working.....but the drivers side was fine. I replaced the PG's with a set of Pioneer TS-C720PRS and after two weeks I noticed the tweeter from passenger side was cutting out. Eventually the tweeter stopped working all together, and now my mid is cutting out on me......and it doesn't matter if it is at high volumes or low volumes. So basically to sum it all up: The channel that's pushing my passenger side has blown through two different comp sets and I'm wondering if something is wrong with the amp, or if I'm doing something wrong (the drivers side mid and tweet are fine). I don't have th…

I still have mine, and alls good at the moment. Thinking about getting another amp. Curious about them because I didn't see them on your new site. (since the last time I've seen it)

well im bored and feel like writing a bit lol so i wanna say that this amp works great @ .35 ohms...im burping with it and it can take numerous burps without even getting hot, the volume doesnt have to be rolled cause it wont go to protection. I was doing 140-141 with it @ 1.4 ohms and when i lowered it to .35 my # goes up to 145-146. also the amp is pretty efficient @ .35, my volt goes down to 12.8 without recharging batts. also the amp can play music/bassrace fine with it...i bassraced a 139.6 with it(the damn bass ended 2 sec. before the run :S) , it also plays music fine, i played 3 full songs and THE amp took it like a champ...anyways im not telling everyone to go on…

Thinking of a change from the BTL and going to 2 15s before I sell the whole car next year... I always wanted to give them a run... And sundown amps are the chit so the subs can't be far behind... If I need bigger I have room. Car is a 02 caddy deville. blow through type design or sealed off from the trunk is the way I wanna go. Just waiting on the new 100.4 and I'm done

Went to local show, Larry's Electronics today in Mesquite....Lotta nice stuff there... Had my hoopty out there as usual...both 3000D's strapped @ 0.5ohm...each amp seeing 0.25ohm....and the 18" Nightshade in my daily music box tuned to 27Hz....WoW! lol.......Peaked out at 44Hz.... Tone 44, I burped a 150.4 and a 150.5.......I can't wait to get the SPL box in this damn thing... On to a couple pics..... The Ride.. The set-up... The Equipment of choice.. The score... Had a good time...Looking for 154's when I get the SPL box done...

well we had another good showing today at a great show down in elizabethtown.. was a little hot though.. Derek 1st place Street 2 with another 148.. PHAT CAR award!!! Corey 2nd place Street 1 with I believe a 145.3 1st place Drive by 1 with 121.8 Seth 2nd place Amatuer Street 1 with a 143.4 Jeremy 1st place Mod 2 with a 150.4 "playing music the entire SPL run.. hehe" 1st Place Drive By 2 with a killer 129.1 "lookin for a 130 but just too hott" Also Drive By Best of Show also another member of our team that doesnt have sundown stuff yet Josh 1st place Mod 5 152.3 have a few pics on the way

So, i was on 2 events yesterday my setup was 2 optimas, one in front, one in back 2/0 wiring between the bats and to the amp 1 Sundown SAZ3k on 1 RE SX12 D2 first event 1st place DB Cup Beginner D with 144,5Db 2nd place DB Drag Street C with 144.5DB 2nd place Bassrace with a 129.6 (first try ever) 2nd event 1st place Beginner D with a 145,2DB 2nd place Street C with a 144,6DB everything legal at the windshield meterd with termlab next event in 1 week, try to work on the port and see if i can do any better edit: 2nd place street c, not d sorry ^^

well i went to a db drag show over the weekend....it was my first time with the new amps... bass raced at a 155.3 not too bad.. the amps work great.. but my voltage was kinda suckin.. 11.5 voltz full tilt.... workin on getting more batts and another alt.. funny thing.. i did that number with my main RCA's falling out..i only had one in when i bass raced !! maybe i could have done a 156 with both plugged in.....oh well.. good weeknd .......... lil-john

ok, so i've got a saz1500d, i'm going to get a chevy impala 00-04, i gave the gf the type r 12"s i originally had in my lincoln towncar, i'm thinking single 15" for the next set-up so i can give it the box space it needs. would a single nightshade 15" w/1500 rms in an optimal vented and tuned enclosure put me in the mid to high 140's?

Never owned Sundown before but I researched for almost a month all kinds of amplifiers. Price wasn't as big of a concern to me as quality. I read countless posts about Sundown on the internet and never came across a single negative about them. So I decided I'd power my system with Sundown. I preordered the SAE-1200D knowing I'd have to wait a month or so to get it. That was a tough decision too because I hate to wait. I paid for that last night and today I go to check my e-mail and I see a UPS tracking notification. I then see another e-mail from Jacob Fuller which says he is sending me my SAE-1200D already! They say 1st impressions mean a lot and I have to say my 1st im…

A few vids ...just messing around ....new one coming this week

donno if he posted pics yet but heres pics of his new sundown setup from the show on Sunday. LOUD AS HELL!!!!!!!!!

i was going to do 2 18's untill i got a great deal from my teammate pipo with his t5 12's. i will be running 6 of them off 4 1500's and 7 optima g31 batteries (pic only has 6 because i have one under the hood already). plus an 300 amp excessive amperage alternator also. This will all be going in an mazda b3000 ext cab(same as ford ranger). I would like to also thank jacob for his excellent service!

New build for Finals, Hope you enjoy! Will Post TL Results Next Sunday!

I live in ct. and am willing to help others set up thier amps and head units with my o-scope. it makes a difference knowing exactaly when you have distortion or clipping. if i can save even 1 good sub from death it will be worth it. i dont have alot of time on my hands but will help when i can.

I went to go the website and get some weird page like the name has not been bought? But anyways does anyone have a cutout diamter for a SD-1v1?

The SD-1 v.2 10" subwoofer is going on sale! Fantastic dual 4-ohm voice coil USA made driver. http://www.soundsolutionsaudio.com/forum/i...showtopic=18579 * Review by JimJ MSRP was $229 on these drivers. You won't be able to find another fully USA manufactured driver that is as shallow and performs as well for near the blow-out price of $115 *shipped* in the USA each. This is HALF the original price. COMBO DEALS: SAX-100.2 + 2x SD-1 v.2 10" - $425 (shipped) SAE-1000D + 2x SD-1 v.2 10" - $500 (shipped) *** 1000Ds are sold out right now - July 23, 2008 Paypal me at [email protected] to take advantage of this offer. Due to the blow-out pricing these subs include only…

Is there an easy way to make one of the wired remotes into a master volume control for all of my 100.2s? My HU doesn't have a knob. I like knobs.

Hey jacob my wife lost the original invoice from when i purchased the 100.4, 100.2, 3 3000ds back in january. i was wondering what i could do to get my amp (100.4) warrantied since its still covered. channel number 4 is out straight out of the box. any help would be great. i figured it would be easier to contact u on the forum than by PM since u probably get 9 million emails a day. thanks very much. Name - Richard Veach Lafayette IN 47904 maybe that info will help.

Little FYI for those looking for really awesome fiberglass enclosures for, IMO, incredibly cheap prices: http://www.resinating-resin.com/products.htm I have the one that says "Sundown Audio" on it sitting at my shop... paint looks like auto paint - factory level quality. Very high quality enclosures. I know the owner personally, from before he moved back to Michigan. I'm sure he could even do them thicker for high SPL drivers (Nightshades) - although, it may not even be necessary... we'll be testing the box I got from him with Nightshades as soon as we get power wire in my Jeep.

I am trying to figure out how the night shades compare to the digital design subs for a spl vehicle. I am wanting to know how loud the night shades are to the dd subs. with the same rms levels. I guess i would like a comparison btw the 9500 series and the 3500 series against the night shades. Any one with some experience here?

Ya ya, my wiring is kinda messy right now but it might not be permant. and yes i know i shouldnt brag about "novice" trophy but it was my first time, and i still hit a 144.3 off two type R's with no tuning jus playin with it. on my btl i hit a 147.30. The guy that got first hit a 147.33 with 4 Type R 15''s. FYI GORRILA DUCK TAPE FTW!!!! at the show still filling the aero leaks on the aero's SAZ 3K btl 18 fully loaded 4.5 cu ft tuned to ....???? didnt have time to correct the aeros.

First time posting here, but have been reading up on Sundown for the past few months and have like everything I've read so far. So a month ago I purchased two brand new SAZ-3000Ds and they are strapped together to make a 6000W monster. Well I was trying to do some no load gain settings like I have done in the past on other amplifiers. I have three Powermaster D3100 batteries with 1/0AWG cable between each as well as 1/0AWG cable for Pos and Neg to each amplifier. Also I have double runs of 8AWG between each amp as well. I set all controls for both amps to zero connected my sub out RCA from my HU to the master amp and the BR out to the BR in of the slave amp. I place…