Sundown Audio

while the saz3000 says 6v-0.2v for the gain, does addin a line driver which puts out 9v is not safe?

Ok this is so confusing to me i am confusing myself. So plz hear me out. First of all I am using 2 of these sub http://manuals.harman.com/JBL/CAR/Boxes%20...12GTi_rev_f.pdf Together wired in parallel they make a 1.5 ohm load which what i been told on here thats really 2ohms or a 2ohm amp for max power would be best suited. (parallel/parallel) = 1.5 ohm load Voice coils wired in parallel, speakers wired in parallel Right now I have a sundown 1500d which is 800rms at 2 ohms. I want to buy another 1500d and strap it. My confusion is right here since the sundown does 1500rms at 1 ohm and i decided to strap it what will my final ohm load be. I am hoping that if i strap this a…

this is a neon partly built by Luist(nickname on this forum)...sounds loud but needs more volt(hes playing on the 11 volts and the 100.4 overheats) here are the pics... and here a lil vid

* Box is three layers thick on the front for amp mounting - but we are still trying to find another place to mount the amps. * Huge port! * Brandon's trophies from the show, and our lucky extra dBeez! * Damage to the roof from demoing at the show * Another view The deadener is also ripped all around the edges of the perimeter of the roof... little pieces were falling down all day!

Todd Mayton - Twisted Mayhem Amp(s) - 2 Sundown 1500d's Sub(s) - 4 T3 TS 12's Amateur Street 3 - 1st Place - 145.5 dB Drive-by SPL 3 - 1st Place - 121.2 dB Daniel Kirkland - Twisted Mayhem Amp(s) - 1 Sundown 3000d Sub(s) - 4 True Bass Solutions 10 inch subwoofer Modex 1 - 1st Place - 148.8 dB Bryan Mayer - Twisted Mayhem Amp(s) - 2 Sundown 3000d Sub(s) - 12 True Bass Solutions 8 inch Ultra's Street 4 - 2nd Place - 146.2 dB

I hope this isn't a stupid question. A friend of mine has the SAE-1000D and wants to run it at 2 ohms to power his pair of JL Audio W3v3 13.5s with 600 watts until he has the money to get the electrical upgrades he needs for his car. He bought the amp so he could expand his system when ready. Right now he has a Batcap 800. He eventually wants to get a bigger alternator and 2 good drycell batteries in place of the Batcap and a 2nd SAE-1000D and 2 Icon 15s, but for the time being just wants to use his JLs. How should he treat his gain for the JLs being the amp is going to be ran at 2ohms rather than the amps max at 1ohms?

Hey guys I thought i'd give you guys a headup for an awesome show and i'll be bringing my sundown setup with me. Import Face-Off USACi 2X event with Car Show @ 10:00am 8-31-2008 Kansas City International Raceway 8201 S. Noland Rd. Kansas City, MO 64138 Its got the best of all worlds spl/drag racing/ufc style events/car show/bikini contests

Got these Wednesday after a trip to Sundown's shop. He had some pretty cool stuff laying around. : Well, heres the pics. Haven't even hooked anything up. I have nothing to put it in. Oh well. Sorry for the crappy pics. From cell phone.

Ok I am wandering will a 1500d at 1.5 ohms will put out? I have a 100 amp denso alternator hair pin design i have heard there amps is higher then what they rate them. I have a group 35 battery i think it is 450 cca and i wil be using a 1500d on 2 jbl gti's 12's running 1.5 ohm load. My question is will my electrical hold up or will i need a new battery? I plan on getting a kinetik in the future when i get the money it is a brand new 2009 corolla so all i am really worried about is battery power which i can always turn down the sub bass but will i have to or will the electrical system hold up? I am using Kolossus Fleks 4 Gauge Amplifier Installation Kit and I wish i would…

Today was a local dB Drag event here in Sacramento. My first comp running Sundown Audio and I took 1st in Bass Race 149.9 class. I was the only person there running Sundown Audio so I was representing! Qualifieing I held a 49.9 for about 10 full seconds right off the bat but then hit a 150 so I drop it down and ended with a 149.5. On my run I did a 149.6. Im really Happy with Sundown!!! I have pix and videos uploading but will take a wile. Ill post them up when there finished. All and all it was a good day excpet I think my 200A alt is on it's way out! =(

So I saw that SSA is out of stock of the 100.4's I'm looking to grab up a pair of 3000d's and a 100.4 from them Just wondering if/when they are expected thanks

I've been kinda rethinking the whole larger setup that I had planned. Would a SAX-100.4 be suited to two AQ SD2.5-15s in a horn? AudioQue SD2.5 series The subs are D4. I'm still waiting on a shipping quote from AQ..

* 2006 VW GTI 2.0T * Factory HU * Rockford 3sixty.2 * 2x SAZ-1500Ds * 1x Custom Nightshade 12" * Ported box * Factory battery + Powermaster D3100 I'll get some pics up later... been working on it a few days getting all the wires in (PITA in this car). Hopefully it'll do a decent number First attempt at any setup in here so I don't know what it's going to do.

I just got my car back from my installer today and I must say these Sundown's run super hot. After maybe an hour of playing time I almost burned my hand touching the top of the amps. I have one SAX-100.2, one SAX-100.4, and one SAZ-1500D and all three of them were equally hot. Also the SAX-100.4 shut off at one point probably due to the heat while the other two amps continued to play. Does anyone else have this problem? I think my installer is going to have to install a fan to blow some air on these things but I'm not sure it's going to help as it'll just be cycling hot air. For an SQ install they sound good, I just hope heat doesn't spoil the fun for me.

right now i have 1 1500d that i havent even taken out of box yet. I was going to run 1 12" BL, but now i have traded vehicles. Now thinking of running 2 15's or 2 18s. Since i already have the 1 1500d, which would draw less current running 2 1500d's or just 1 3000d? I may just sale the 1500d just to make easier on the wiring. thanks

i'm currently looking at getting new Amps for my setup i'm running 4 RF T-2 15s, 2 250 amp alts. 10 batteries at 16 volts. I'm thinking about adding 3rd Alt if need be I have the 3rd one on hand. i know that sundown has 3000watt doing well over the rated output at 14.4 volts. I have heard about a new amp that is coming out and i'm very interested in running the Amps but i don't want to over load the subs to much(LOL) yes i do....... this is all installed in a 93 Jeep 4X4 Lardeo.

The SAE-1200D will have an MSRP of $499 USD. Once they arrive here at our warehouse we will have some intro sale action on them to get them out there in customers hands

anyone know where i can get the gain reduction knob for a 3k? and how much it would cost?

Hi Guys, As some of you might know im planning to get a saz 3000 D when my ship come in. I am also planning to get a eclipse 7200 due to some pretty fancy features. Problem is that it said to put out 8v on paper while the saz is said to except 6 V on paper. Sure I believe the specs of the Saz more but and sure the eclipse dont put the 8 v all the time if ever, but will these two pair up nicely and if not what will happen. thx again.

How much power would I get if I Bridged a SAX-100.4 @ 8ohms? Does the SAX-100.4 have Sanken Bi-Polar output devices?

Okay I am buying my Christmas present a little early. I have a 1997 Toyota Camry. I use a Pioneer DVD H/U and I have 1/0 ga. KnuKonceptz wiring and I am looking at running the Sundown Audio SAZ-3000D on (2) 12" Fi Audio BL's with the cooling option. This will be a daily driver and I want to hunt down a JL Audio guy, will this do the trick? I listen to just about anything but I still have my DJ Magic Mike and Techmaster PEB CD's. I do have an additional battery in the trunk and upgrading the alternator won't be a problem. Please help!

* Peak Score 6.5 feet away - 128.2 dB on music http://www.youtube.com/watch?v=PkKPgifYfvA * 25 Hz peak SPL - 140.4 dB http://www.youtube.com/watch?v=K0vYteGwShg * 29 Hz peak SPL - 141.4 dB

well yesterday we took about a 2.5 hour trip to columbia to an E2 audio MECA event. It was an awesome show sundown made a good showing once again. Pics will be up soon. Derek - 1st place S2 148.0 2nd place street install Corey - 1st place S1 with a 143.?? dont remember 1st place DB1 with a 122.8 1st place Show and shine PHAT CAR award needless to say corey brought home many more 1st places than i but oh well good showing!

i am trying to find a couple of voice coils that will fit my needs. either dual4 or daul2 ohms. 3 inch of course. and it needs to be able to soak up about 2000rms it is for a custom 3hp that has an extra half inch of magnet, and a gap that is machined a little larger than normal the sub is being built for daily use, i am trying to make it a low end beast, and 2000rms will be it's limit, because of the suspension i am using will only handle around 2000rms. i have the measurements in case that helps. top plate to bottoming out is 4.166" outer diameter of gap is 3.455" inner diameter of gap is 2.934" if you can help me i need two of them. the goal is to hav…

I'm in the process of acquiring the rest of my system and basically the last thing I have to add is my sub amp and sub. I think I've settled on an ID Max 12 D2. I'm wondering what kind of drain running the SAE 1000D will put on my stock charging system at 1ohm. Also, I'd imagine this would be plenty amp to run an ID Max? It should have plenty of oomph if I planed on having the ID Max in a sealed enclosure in the trunk of my '03 Mazda 6. I have an Alpine MRV-1507 class A/B for my front stage. It's a bit of a current hog when bridged but when running mono it doesn't seem to drain the charging system nearly as bad. So... will running a SAE 1000D at 1 ohm onto an ID Max…