Sundown Audio

The SAE-1200D will have an MSRP of $499 USD. Once they arrive here at our warehouse we will have some intro sale action on them to get them out there in customers hands

Ok so I got everything hooked up last night ( 2 3000Ds on 2 Nightshade 18”s) and it

hi all can i use the remote gain on my 100.4 to attenuate MY MIDS off channel 3 and 4 ? reason i ask is because i was looking at other remote gains and saw that frequency was a factor in how those work so i just want to be sure

ok the issue is channel 4 of the amp does not work. amp has never really been used. its still under warranty so ill be sending it in sometime in the future just curious how many come out of the box with a messed up channel? i just used channels 1 2 for my comps and bridged 3 for my coaxials for right now. great amp just has an issue.

Please say the upcoming (and highly anticipated for me anyway) SAX-50.4 model will have the same awesome crossover capabilities as the new SAX-100.4 Rev D?

Just as title states, I just aquired an used 3000d and it will be powering an D1 sub.. this is a daily setup and the sub is an RE MT12... Im basically on stock electrical with an yellow top and BIG 3 in an S10 chevy.. Should i wire this in series or parallel you think... I must add that i dont understand all that much about impedence rise but know it exsist and do not know what or how safe this is at .5 ohms.. anyways, thank you..

The SAX-100.4 is now OUT OF STOCK pending the improved "D" revision in 10-12 weeks. We apologize for the long out of stock period but it was necessary to spend some time and energy to create the new D revision, it will be worth the wait! Details about the "D" Revision here: http://www.soundsolutionsaudio.com/forum/i...showtopic=19792

Mike Bruno is going to be re-building the QC failed E8 drivers with all new parts for $60 + shipping : http://www.caraudio.com/forum/showthread.php?t=340607 Get them while they last... when the E8s come back into stock the pricing will not be as low as the original pre-sale.

I know the sensitivity is only up to 6 volts but ill be running 2 3000Ds strapped

my sub is wired to one ohm. How do I wire my pos and neg speaker wires to the amp? Can I go from the positive terminal on one side to the net on the other?

Anyone have an extra remote knob laying around that they could spare? I am in the final stages of putting together my system for my Mini and got a great deal on a 100d but it was missing the knob. Any help would be appreciated. David

Hi Guys, As some of you might know im planning to get a saz 3000 D when my ship come in. I am also planning to get a eclipse 7200 due to some pretty fancy features. Problem is that it said to put out 8v on paper while the saz is said to except 6 V on paper. Sure I believe the specs of the Saz more but and sure the eclipse dont put the 8 v all the time if ever, but will these two pair up nicely and if not what will happen. thx again.

what is everyone getting on a saz 1500 output voltage wise ?? i did my set up with a 60 hz tone crossover set at 80hz..speakers NOT connected.. i set it at 39 voltz...output AC sounds good but not very loud at all.. maybe i am doing something wrong ?? i know they can get louder .... help..

Are the Sub Out RCA's controlled by the subsonic filter built in the amp? Or are they purely non adjustable pass throughs? Thanks

Well I have most of my system in right now. Had to send my planar mid ranges back to good ol Parts Express so slapped together two little boxes with some quart 3 1/2's to play the mids in my system. Also blew my Fosgate 500a2 and swapped in an Orion 900.2 my boy was going to use (I bought him a refurbed SAE1000d from Db-r) So its been some ups and downs. I am running a Sundown SAZ1500D on a TC Sounds TC3000 15 DVC in a 3 1/2 cubic foot box @ 40 hertz. Here is the amp rack as I got it fitted in my car. Just for the record, am running a full active system with 8's in the door, my missing planar midranges and planar tweeters. Hope to do Sundown justice.

http://www.sundownaudio.com/rides.html Jacob has decided to give me the go ahead to take over the rides section on the sundown website. What this means is basically the page will be updated in a very short turn around from the time pics and stats are submitted. IF you want your spot on the sundown web page just submit the following. Stats ------------------------------ Name: Sponsors: Processing: Front Stage: Rear Stage: Amplifiers: Subwoofer(s): Enclosure: Other Equipment: Vehicle Mod's: ------------------------------ Pics. As many as you got! Video: Link to your video as well. send all requests to [email protected]

I just installed my SAX100.4 and when I was hooking up the Power/Ground I got a spark. I had hooked up the ground first and was undoing the screw for the positive connection on the amp. I guess the side of the screwdriver touched the the side of the amp and the positive screw at the same time and sparked a little. The amp works but I can't think of why it did this. Anyone care to enlighten me? Also, I was wondering what exactly the remote knob controls? Is it gain or bass boost?

anyone know where i can get the gain reduction knob for a 3k? and how much it would cost?

i want to run two solo x 12" in my grand prix on two 3000.1 sundown saz and i was wondering wut load solo x is best for my amps dual 2ohm or 4 ohm? and how many additional batteries do i need? this is a daily driver with a 220 amp alternator.

I have to say congratulations to Gary aka banginAltima for his new personal best score of a 146.9. This was done out of the trunk of his '06 Altima using a pair of RF T1 15s powered by a single Sundown saz-1500d. It is a daily car tuned to 33hz and peaks @ 41hz so no fart boxes here. This car will absolutely pound some Jeezy. This score done with the car completely sealed and mic on the windshield DbDrag style. He is by far the loudest trunk car in his power class. Sundown Powa! I didn't do too bad today either taking 1st in Street Bass (like BassRace) with a perfect 139.9. Yay for cash prizes!

Hey guys. Can you please double check my wiring. I

Hi Guys, So I want a SaZ 3000D and nothing else. problem is i know my electrical might or might not make it. All i Need (for the time being) is 2000RMS into 1 ohm problem is; im half way around the world and no one is doing a alt for my car. at the moment im pushing 1200 RMS (mono only) into 2ohms and dont have any problems with my all stock electrical the plan is to get the big 3 done and two identical deepcycle battery's im planning to push the 2x BL 12's if any one would want to know my current amp will do 1750 RMS into 1 ohm but somehow i think a big amp working not so hard will give better results then a smaller one driven to its max ?? + its a sundown so i got to h…

thanks for the stickers, i got my 100.4 here in HAWAII in no time. packed well. shoots.

im looking to redo my set up. want to go with all sundown amps this time. will eventually go active or use the 3/4 chanels fo mid bass. after i buy my saz1500 & subs but until then can i use my 1/2 chns to run my comps passive and bridge 3/4 at 2 ohms on a small sub? or does it have to be at 4ohm? and what type of output can i get out of the bridged chns at each ohm load. i going to order the new heatsink model by the way.

I've had this amp for about a month now and yesterday as I was driving around I lost power to the front speakers. I thought nothing of it just thinking that the power wire may have slipped out. So when I got home I checked and the power wire is in, all the fuses are fine and there is power flowing through the power wire. The remote wire is also in and has power flowing through it. The amp does not turn on or go into protect. Not sure what else this could be.