Sundown Audio

* 2006 VW GTI 2.0T * Factory HU * Rockford 3sixty.2 * 2x SAZ-1500Ds * 1x Custom Nightshade 12" * Ported box * Factory battery + Powermaster D3100 I'll get some pics up later... been working on it a few days getting all the wires in (PITA in this car). Hopefully it'll do a decent number First attempt at any setup in here so I don't know what it's going to do.

are the heat sinks grounded on sundown amps ? i would figure so but just checking. does anyone ground the case of thier amp?

Hi purchased this sundown 1500d and i am needing a lil help with this amp setup. I need to know the difference btw the bass boost and the gain. I am using a stock hu using a david navone loc. Fist of all can this amp take more then 6 volts input voltage? 2nd how should i adjust the bass boost with the gain? I am not doing it right i only can tune by ear and it seems i keep clipping the amp because when i play a song when it hits a low note on the song it bottoms out on the sub pops ect. i turn it down problem goes away. How should i be adjust the gain/bass boost?

Sup guys, unfortunately I have to part with my 2nd 3000D....I do not wanna do this, but when your out of a job...stuff's gotta go.... I'm Team Sundown and its open to Team Members that want one.. PM me for a price if your Team SD, and we can get the ball rolling..I'm in a big bind...Credit card bills and internet bills are coming...I know someone wants a 3K...and I know Jacob doesn't quite have them yet.. I appreciate it Jacob for letting me sell it, but I'll be buying another one soon as I can afford it again. Here is a pic of one of them...both have the same graphic.. and due to a retarded....long long long long long story for another day...I don't have original pack…

I have a Nissan 350Z and I have ordered a 180amp HO alternator from Ohio Gen to go along with a Kinetik HC1400 under the hood. Do you think that'll be sufficient to power one SAZ-1500D (1ohm 1500W), one SAX-100.4 (bridged 320Wx2), and one SAX-100.2 (stereo 100Wx2)? I already have the "Big 3" done as well. I refuse to run Capacitors so please don't even bother suggesting one.

The 3000Ds are in customs now here on the east coast. If they clear smoothly I may have them tomorrow. If not, I should still get them before the end of the week. Orders will ship ASAP once they come in.

I just got my refurbed 100.4 and got 3 quick questions. 1. I have existing 8 gauge power and ground that connect to the primary battery less than 3feet from the amp. I would like to run this amplifier initially to power a subwoofer 4ohm off of chan 3/4 and leave chan 1/2 empty. Would this be ok? I would upgrade to 4 gauge when I hook up the front 2 chan. 2. I have a pair of RCA's from my sub out on my HU. Is this going to provide enough signal or does this amp require all 4 rca's to be hooked up. I think they should be ok, but just wanted to ask. 3. On the cross over pots, they are marked as 50hz to 500hz. Is it safe to assume that it if I placed the pot in …

Ok, i've been doing some research about these drivers and my question is: Are these daily woofers? If so what tuning frequency do they like? I am wanting something on the LSQ side but need 2k rms daily powerhandling and low frequency extension ability. I want to tune around 28hz. Does this driver fit the bill? Thanks.

My Maxx-Link is installed & dialed in as well as my amps and everything is sounding great. Since I had the clamp and dmm in the truck I decided to go ahead and take some measurements. My strapped 1500s put out 90v and 40a while drawing 400a of current with voltage dropping from 13.5v to 12.2v. If my math is right thats 3600watts @ 2.25ohm & 12.2v out of a pair of strapped 1500s. My subs are dual 1s wired in a parallel series configuration. Basically the amps are strapped @ 1ohm (0.5ohm each). All testing was done on music playing Gorilla Zoe - Waddle (nice consistant 34hz bass line that works well with my current 33hz tuning). Measurements were taken 5-6 se…

Sundown Audio takes three first places: Team Tremorz (1st place)in RX1 and (2nd place)in db5 .We had voltage issues all day which will be resolved by Mooresville NC event AUG 30th. Sundown also takes first place in M3 with one SAZ3000 and two AQ/DD15's can't remember what team the guy was with in M3 . Sundown also takes a first place in SQ can't remember which class I didn't judge the sq side may have been ssa team? Congrats Jacob and keep building them so we can slowly take over the spl world one comp at a time.

I worked all day yesterday getting my Maxx-Link working properly. I'm 99% positive it was an issue with the outputs on my old head unit. Now I'm trying to get everything fine tuned perfect and there are a lot of adjustments on this thing. My only concern is what to set the ouput of the Maxx-Link to? Its currently set to 5v but can I go higher? Will the 1500s take the full 9v output? I checked the owner's manual but didn't see it listed. Also since I'm not using the br output to strap the amps, do I still need to gain match them? How does that work? I'm used to only setting one amp and now its like I have to set both amps and the Maxx-Link which is driving me cra…

Is the warranty transferable on SAZ1500D's?

I decided to go with 2 sets of CDT components. If i decide to run them active, can i run all 4 tweeters off channels 1 and 2, then run all 4 mids off channels 3 and 4? This should be 2 ohms all channels? thanks

Just bought a brand new sax100.2 and got it in the mail today and let me just say the sundown pwns my 2008 model RF 400.2 I had in there. the output is better and the sound is "cleaner" if that makes any sense. VERY HAPPY WITH THIS PRODUCT JACOB! Im scared to see what my new 3000D's are gonna do to this truck

As the title says, do the new SAX-100.2's have the new heatsink on them yet? I'm wondering because I already have a SAZ-1500D and a SAX-100.4 with the new heatsink and would like a matching SAX-100.2 to go with them.

Well the build is now getting started, I got the SAZ 3000D today, and then i picked up a Jensen DVD player with my earnings from the last competition, now on with the pics!!!!! Out with the old... In with the new... I got some Dynamat too... The Kicker KX350.4... The KS 6.5" 2 way door speakers... The KS 3 way 6x9's... And now the big boy sundown SAZ 3000D that will be powering the BTL... I will have more photos when i get the BTL, and the batteries! Enjoy!

Sundown Audio Shirts Available Available in the following sizes / pricing: Shipped prices in continental 48 states. Small -- $15 shipped Medium -- $16 shipped Large -- $16 shipped XL -- $18 shipped 2XL -- $20 shipped 3XL -- $21 shipped 4XL -- $22 shipped 5XL - $25 shipped Paypal to [email protected]

Got my new toy in today....pictures dont do this thing any justice..at all... Insanley massive......Makes me want to order another one.. I got gain and bass boost at 1/4 and its slamming already....I can not wait to turn it up and see what it really does..but at 14/35 on the volume...the lows are crazy..... Gonna break it in for a few weeks at low volumes though.... Powered by 1 of my SAZ 3K's and 3 DEKA's..... Thanks for a bad ass sub Jacob.....was packaged great to...arrived here in top notch shape. Will post more pics in a short while...as well as a video...

it was time for the MTs to go now time for the new <<<<<<NIGHTSHADES A big thanks to Jacob & Brandon for coming through ....

Of course... Took the stupid JBL's out again since I'm still waiting patiently on my 18" and had a fun time today.....Did a 147.3 last weekend with them @ 2 ohm...decided to resin the box and drop it to 0.5ohm to see what she'd do....Heres the results.. Went to a show out in Frisco Texas with the car...took 1st place in my class and High SPL of the show....a ton of SQ cars there...A few guys were doing 149.2's and 148.9's.....I ousted them...with Sundown Power... 1 SAZ 3000D 2 12" JBL's Power Series in the back seat.. 3 DEKA 9A31's Gain - 0 Bass Boost - 0 A few pics... The set-up... The Score... The ownage.... 1st place and high SPL...

what ohm load is it safe to burp (2) SAZ3000D's strapped w/ a Maxxlink? Right now, resting load is .8ohms - we have (6) 16V batteries that rest @ 17.4 and are @ 20.8 when fully charged. Would the amps go into protection? Thanks...

I see that it says 160x4 at 2 ohms. This might be stupid question, but i havent ever had any 2 ohm speakers, but the RE XXX comps are 2 ohm. Can 2 channels run 2 ohm and the other 2 run 4 ohm? Or should i run 2 sets of xxx components? thanks for help before i order

Thanks for the great amps. I finally put the amps I ordered from you in my ride and they work great just wanted to say thanks for a great product.

Well UPS finally came and dropped off my new baby in one piece...I must say, this sub is a monster. It looks like it could just devour my old type argghs! So I almost got the build complete, just gotta finish up my box and I'm good to go...had to wait on my ports which I also got today as well. I guess you can say it was a good day though. Thanks Jacob for the beefy a$$ sub, I LIKE!

YEAH!!!!!!!!!!!!!!!!!!!! I JUST BOUGHT A SUNDOWN SAZ3000D!!!!!!!!!!!!!!!!!!!!!! I'M KINDA EXCITED FOR IT...