Sundown Audio

Does anybody know the displacement of the Sundown SA-10's? Cant seem to find it on there website

I think this will be my last try to get some information. So you folks are my last hope to help or point me in a different direction. Here is my question. If I want to build a box of X cubic feet and there is not enough space where I want to build, can I build another box and have the two boxes attached by pipe or tube or sealed passage way etc.. Example: I would like to build a box in the right rear most corner of my trunk but there is only 1.5 cubic feet of space available if I build the box, and my sub needs 3 cubic feet. But if I built a mirror replica of the enclosure and installed it on the left rear most corner of my trunk and connected them by... I don't know, let…

I am a new Sundown Dealer and I have been seeing great results w/ these woofers. BUT...the lack of mounting information is really hurting my leeway to fully expand my designs in limited space builds. I see that mount depth is listed most subs, but motor diameter would REALLY help also. probably an unreasonable request (just wishing) but a google sketch-up model of the subs would make my world exponentially better I just finished an install today w/ 2 SD-2 10's in a '97 ext cab chevy (sealed ~.6cuft each, customer loved it, great low-end response) and I "called" the SD-motor diameter ~7". After crunching some #'s, I figured that I can build a SICK budget setup w/ a sin…

I am a novice and am looking for some suggestions. I have heard a lot good things about Sundown subs, looking at the website I am similarly impressed. I have a Toyota Tacoma Double cab and am looking to put a modest sq system in it. I have jvc double din and alpine s series component and coaxials in place. I have been trying to research a sq sub for the low end. I was going to use a single 10 in a Tacotunes enclosure ( 0.55 cu sealed with a 5.5 in top mount depth enclosure). And powering with a 5 channel amp, either re audio or alpine. I have been looking at the e series and the sd-2 series. Which sundown sub would be the best choice for a sq sub? I appreciate an…

Got a small stealth box I'm putting in my car and I need a sub for it. I believe the SA-10 would work,just want to make sure.I also need advice on which amp. Here's the box specs..... .6 cu ft space,sealed. Mounting depth of 8 inches.

Hello i live in alpena mi and we have a business here and they claim to be a authorized dealer... they said the samething about alpine and they were not a direct dealer and they go through another dealer to get there supplys and now they carry sundown... so i guess my question is if any one knows if they are a authorized dealer or not that would help out a great deal...

About how much power with 2 1500d's strapped at 2ohms put out?

I know a made a review thread before, but I didn't fee like bringing that back to the top. I recently just got my third amp was able to really give some power to these guys before I was only giving them ~30 watts. Amp in theory is putting about ~125 per speaker, rough guess is probably they are seeing ~110 at full tilt. Man does power bring these things to life. Crossover set at 85@24dB slope. The combination of the MS-8 really helps brings these speakers to life. They get LOUD and have no problem keeping up with my horns receiving almost the same amount of power (of course the MS8 helps with that too). They sound amazing as well, even at full tilt. But my biggest concern…

i have a question, is the $350 fixed already for the SAE 1200D, or are there addtl charges? and for the SAZ 1500D $570?. it will be delivered to anaheim, CA. and will there be any increase in the price? i might buy an amp on march.

Have you considered doing a test on every amp and print out a birth sheet for each one?

The frame renderings themselves are not ready to be shared yet but the cone body and surrounds are ready. Each surround has the following calculated geometric capacity : 10 -- 50mm one-way (frame allows 45) 12 -- 55mm one-way (frame allows 50) 15 -- 60mm one-way (frame allows 55) Therefore; each one has a 5mm cushion beyond what the frame can handle in it so the surround CANNOT reach the maximum geometric limit -- as this can cause stress and eventually tear the surround. We've taken note that no open tool / readily available surround can handle what some of our newer designs can dish out already... and future designs will be even more extreme on throw so these surrounds …

I'm working on alot of stuff right now... I am not 100% sure how much will make it to the market by the end of this year but lets cover what is currently in the pipe-line : 1) Nightshade v.3 -- Already discussed on the forums a bit. This will be 15s and 18s only for a while -- maybe a few 12s for burp apps but NO TENS. 2) New Sundown baskets in 10/12/15 sizes. I can't show off the renderings yet until my ornamental patent application is in... but think at LEAST as much clearance as the "Eclipse" baskets AND even stronger. 18s will definitely not make it for 2012... but are on the road-map for 2013. This will allow me to make the NS v.3 in 12s for music applications. These…

Been doing alot of work on some new amp products -- I don't get the time I used to on the forums to keep everyone in the loop but I'll go ahead and announce them today! Production is starting this week so we are looking at ~90 days or so. I won't be starting pre-orders right away but do expect a pre-order at some point once I get more solid time-lines. SAX-150.2 ($400 MAP) : Two channel Full-Range Class-D design (similar to 125.4) -- also runs on 19v like SAX-125.4 SAX-100.4 v.2 ($400 MAP) : Four channel Class-A/B design with similar crossovers to the 125.4 -- but a lower price as it's an A/B amp. Now featuring a fan as with most of our new stuff. This model will run to…

I have always been a bit SQ fan. Clean and clear sound is what brought me into car audio but I had to make a detour towards output for most of our company history so far in order to meet my customer demands. Of course... that has not stopped me from implementing features for lower distortion in many of our models But now I feel it is time to really gear a product DIRECTLY towards SQ. I've started development on what I consider a true Reference grade component set... one with objective distortion levels up there with the BEST products on the market at any price level. This complete set will be priced under $1,000 from an authorized dealer; how much under that I do not kno…

I did some early prototyping around this time last year on some mid-level sets and they were quite good, IMO... I decided to re-evaluate them a bit based on the listening I've had with them since that time. I received the first early prototype of the new mid-level set a few days ago and I will be replacing the 2011 prototypes in my car with these soon. The biggest change is the cone material... for a set like this that crosses over higher I prefer a paper base vs. the composite base (woven material) that the other set utilized. The set is NOT done as I plan to modify the frame on the mid as well as the motor ventilation. There will be no fancy eye-candy to the set -- very…

First one is complete. This should take care of alot of common and uncommon questions about our woofer dimensions. I am looking into printing them at full scale on our packing boxes as well. I'll be adding them to the X thread when the X drawings are done and will also add them to our site for pretty much every model woofer we make.

Cool comparison pictures AND introducing the TEAM Sundown motor that is in development. It will be our first 4" coil motor. Before you ask... ETA and price not yet available. As usual both will be announced when they ARE available. * From Left to Right : TEAM Sundown, NS v.3, NS v.2, Z v.4, NS v.1, Z v.3, Z v.2, and finally the X Motor

Will Sundown have a booth in Daytona and/or bringing any products down to show off or sell? I'd like to see these new Nightshades in person.

New build for Finals, Hope you enjoy! Will Post TL Results Next Sunday!

I recently just purchased a set of Rainbow Germaniums (150w RMS) and a Profi 12" subwoofer (DVC 2ohm - 50~350w RMS). Currently I have eD amps in my car (9.2 & 9.1) and I've heard alot of great things about Sundown amps. The SAX-100.4 caught my eye after seeing pictures of it, but not sure if it's gonna work with my setup. If I run Channels 1-2 to my Germaniums and have Channels 3-4 to my sub (needs to be 2ohm if possible), would this be a possible setup?? I know the Germaniums will not get the power it needs @ 100x2, but if I bridged the 100.4, then that is way too much power for them. Also, how many watts will the Profi sub be getting if I bridged the rear chann…

ok so i'm about ready to buy my amps. i will have 4 15" fully loaded 1 ohm btl's in about 16 cubes tuned to 32hz. but before i buy the amps...can a 3000d handle a pair of fully loaded btl's @ 1ohm? only time it will get turned up loud will be for competition burps. maybe to turn up for demos for friends . other than that it'll be regular volume, so nothing strenuous. i have a 200 amp H/O alt atm, couple extra batteries (will upgrade to some kinetiks in the future), and i'm getting a solid 14.3/14.4 volts. i may try to add another alt if money allows. also...would bass race be out of the question with this setup? to prevent burning up the amps? i'm kinda going out on a l…

... well almost. Originally posted by Greg Kashin on my SMD Forum : Is the Prime Minister of The Russian Federation also a member of Team Sundown??? - SMD Forum ----- Yes, Vladimir Putin, the current Prime Minister and previously The President of Russia for two consecutive terms was at a bike run and was THIS close to rocking Sundown Audio :yahoo: Putin is wheeling the leading trike alongside of him is Surgeon a notorious Russian biker and leader of the Night Wolves.... right behind them is a huge trike rocking two Sundown SA-10's ...I know it's a little hard to see in the vid ( look closely at the vid from 0:18 to 0:21 ) and the media pics but them is Sundowns for sure…

here goes... i had an old speaker book... in the wiring diagrams it shows a "phantom" wiring series... it shows on a 2 channel amp.. 3 speakers ran and it stays at say 4 ohms... 2 speakers hooked up normaly, then the 3rd is left + and right - can the sundown roll like that?

I'm going to run two sets of Infinity coaxials, so four speakers total. The 100.4 would be a better choice than the 100.2, correct? My sub will be run on a Sundown SAZ-3000D.

Hey all, just got my 100.4 from the UPS guy....opended it up, and then realized that it had a remote knob included....I never had a mids/highs amp with a remote knob included...so uh...what is the knob for??? very lame and dumb question, I know Freddy head unit mids/highs & 100.4 all get installed on friday morning at T-Rex audio here in CT..ill post pics and video when I get home most definately