Sundown Audio

http://www.caraudioc...-mid-level.html ** This thread tracks the development process ** As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. DO NOT ORDER if you are not okay with possible delays on the delivery. That being said the ETA is middle of November 2012 on these. ---------- Pre-Order Price : $155 Regular Price : $199 Pricing is shipped in continental 48 states. Contact us for a SH quote to AK or HI. !!! THIS IS FOR USA ONLY !!! To order get in touch with your favorite local or online dealer or send a Paypal in to us at [email protected] YOU MUST INCLUDE YOUR NAME AND ADDRESS. If these ar…

Vehicle is a 99 Suburban w/no 3rd row. List of current equipment: Singer 275a alt, 4/0 power/ground, XS D3400 front, 6 Deka Intimidators rear. I'm considering changing my current setup already & going with the 6-E12's on a SAZ-3500. Curious how many people,if any, have experience using them in multiples. I have about 30cu ft net roughly before sub, bracing, & port displacement. Any suggestions or input are welcomed. I'm changing my current subs/amp setup to show what entry level subs can do.

The 10" is done and drying; should be able to play tomorrow. I'll be a tad more careful this time *laughs* Of course I should be safe with the 8 3/8" spider vs. the 9 1/4" on the 12" model as I shouldn't be able to reach quite the level of throw! This is the first 10" woofer with 3" coil that I've built that I didn't hate every second of... gives me a good feeling and I cannot wait to test it ! * Left to right : Z v.4 10 / Z v.4 12 / Z v.3 12

Prototype motor paired with new 12" frame, 9.25" spider (what we use on Z v.3 18s now), and the new cone / surround. I literally JUST finished it so I cannot play it until tomorrow. That being said... it won't QUITE be able to use ALL of the clearance we have -- and that is great -- should be INCREDIBLY rugged and hard to damage :thumbsup: For those not current on all of these parts -- they are ALL prototype parts. They are not in production yet. Production parts will start appearing 1Q 2013.

Hey there! I have this awesome little subwoofer that i have barely used more than a few hours - and the surround in a small area is comming up from the landing. i heard chuffing in a sealed box with the grommet and thought there was an air leak. upon further inspection i came to notice that the surround was not fully adhered to the basket surround landing! this is a project for a customer of mine, and i have already sent an email into you via your web support contact form - but this is kind of an emergency, as i am supposed to be finishing the fiberglass box for him this weekend - i am about 50% done with it and i am going to push forward with the baffle and port still -…

Has this amp been tested at 8 ohms? Does anybody have any experience doing this? If so what does it put out?

The 10" 4 ohm model just came in today so I decided to take a few pictures of them all together. We've had the 10" in 8 ohm for some time now. At this time all sizes 6.5 / 8 / 10 are all in stock in 4 and 8 ohm coils. * Not everyone realizes it; but the 10" model has a separate motor and a 2.5" coil compared to the 2" on the other sizes. * 6.5" model * 8" model * 10" model

I love my Z 15's but im eventually going to change my subs, i was wondering with the same box and power which will perform better?

4 Zv3 15's and 4 Saz3500's @.5

Build this ABC box like 10 years ago for 2 JBL GTO 8's and I am curious if it will work with 2 1st Gen Sundown E8's 1st chamber .90 cubes 2nd chamber 1.8 cubes all 3 round ports are 10"x3" both subs will get around 400 watts each Thanks in advance

So... I want to do something for real this time and actually get a vehicle that can handle some weight and still drive around without issues. Concerns about driveability have really hampered my previous plans for something large. I really do NOT like driving huge vehicles either for the most part. I happened across a really interesting vehicle by chance on Craigslist last week and decided to pull the trigger ! 2006 Chevy Express 3500 w/ Duramax Diesel Engine! I test drove it and it was alot more comfortable for me to drive than most huge vehicles and has some real power behind it as well. I am looking at mostly music and mostly impressive demoing but would plan to compete…

I got the first pictures in of all of the new cones / surrounds -- they are on the way to me for testing so hope to have some mocked up soon! 10" cone / surround (with revised material from last picture) : 12" cone / surround : 15" cone / surround : 18" cone / surround (for the 6-spoke) :

One of each showed up for us to check out -- will be building a 12" up first since that is the largest one I have a full size spider for. So that means I can take a video of it tomorrow ! On to the photos... they turned out way crazier than I imagined. 18" Cone ---------- 15" Cone ---------- 12" Cone ---------- 10" Cone

Hi Jacob or anyone who can answer this question is the NSQ a reality or still a sub that is in the prototyping stage? and if its a sub thats made to order whats the price and lead time on this beast and what kind of power should it see for daily use?

October sale on the E series is ON as of today! Pricing as below : E-10 : Regular = $105 // SALE = $85 E-12 : Regular = $110 // SALE = $90 E-15 : Regular = $130 // SALE = $105 This sale is available for all authorized local and online dealers for the month of October !!! Pick them up while you can for a great price !

I've had this guy for a while but it seems I never posted up about it. Here are some photos of it -- tests out very similar to the SAX-1200D in power but is in our new narrow casing with a new layout. Pre-order coming soon along with 2500D v.2 and 3500D v.2 models... ETA by end of January 2013. * Much smaller than SAZ-1500D

Developing a 600-watt RMS 8" woofer with fully custom frame, cone, surround, spider, etc... Frame supports ~35mm one-way linear travel and the soft parts support that as well. Design is motor limited to 19mm linear one-way and 30mm before leaving the gap -- so it will be VERY difficult to reach mechanical limitations even by accident on SPL burps. The soft parts, frame, and so forth are VERY over-engineered to support any future motor designs I may desire to produce... meaning you may see a true high linear stroke "SQ" style design with these parts later on -- but first we are staying true to Sundown heritage and designing a super rugged "daily" woofer that will produce e…

I show you a bit of Italian works I hope you enjoy our work are only a few works this is our page facebook: https://www.facebook.com/SundownAudioItaly Fabio Adimari Italian Dealer

The samples arrived while I was out of town -- back now and on to the photos ! Weights : 10" 12-spoke : 1.7 lbs 10" Sundown : 4 lbs 12" 12-spoke : 2.3 lbs 12" Sundown : 5 lbs 15" 12-spoke : 3.4 lbs 15" Sundown : 7.9 lbs Not a finely calibrated scale so within a few tenths. * THICK rim -- no more cracked rim with over-tightened screws or with a super heavy motor. * THICK base -- no worries about bolts pulling through even with motors 2-3x heavier than we use now. ----- Still awaiting our new cones and surrounds to arrive... then we can do some building and show off what these can do ! ----- Mocked up on a motor with our new spacer ring... very similar to the …

Finished up a nice little install in a 2001 Lexus IS300. Kenwood DNX6990 Hybrid Audio Imagine 6.5 Sundown Audio SAX-100.4 2 Sundown Audio SA-12's Sundown Audio SAZ-1500Dv2 Customer took the videos, as this isn't my car.

I stare at it for hours on end until my day will come to have this amp. I fantasize adding to the cart a few times a day lol but recently I notice it says basically out of stock. The year is quickly coming to an end and just want to know if there will be more to go around in the coming months? Again sorry if I missed my answer if its already up.

Got some factory pictures just now -- it's shipping to us soon. Assuming all goes well we'll start production of this and the 2500D v.2 very soon! * I had mentioned we were working on double inputs but it wasn't going to work out with the narrow casing. Outside of dedicated SPL the difference is not significant, though. * We got the production RCAs on this prototype. * BEEF

Production started this week. Typical lead-time is 90 days but I will say to be safe expect them at the end of August. I am going to go ahead and open up ordering since I know many of you have waited anxiously for the 2012 models to start rolling out. As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. I do feel pretty solid on this one as the new amp factory is working pretty quickly for us so far on the NS-1 models, though. SAZ-1500D v.3 : Pre-Order Price : $445.00 Regular Price : $525.00 SAX-125.4 : Pre-Order Price : $425.00 Regular Price : $500.00 Pricing is shipped in continental 48 states. Contact…

I am a novice and am looking for some suggestions. I have heard a lot good things about Sundown subs, looking at the website I am similarly impressed. I have a Toyota Tacoma Double cab and am looking to put a modest sq system in it. I have jvc double din and alpine s series component and coaxials in place. I have been trying to research a sq sub for the low end. I was going to use a single 10 in a Tacotunes enclosure ( 0.55 cu sealed with a 5.5 in top mount depth enclosure). And powering with a 5 channel amp, either re audio or alpine. I have been looking at the e series and the sd-2 series. Which sundown sub would be the best choice for a sq sub? I appreciate an…

Hey Guys. Finally got an awesome video of my new set up in the KIA flexing it's muscles lol. This was at the NSPL, National Sound Pressure League World Finals at South Of The Border in South Carolina. Be sure to watch in HD if at all possible to get the full effect. Feel free to rate, comment, or subscribe to my channel. Enjoy.Hey Guys. Finally got an awesome video of my new set up in the KIA flexing it's m uscles lol. This was at the NSPL, National Sound Pressure League World Finals at South Of The Border in South Carolina. Be sure to watch in HD if at all possible to get the full effect. Feel free to rate, comment, or subscribe to my channel. Enjoy.