Sundown Audio

Monday I ordered 2 of the SAZ 1500d amps called Massive and told em i hope they did'ent plan on selling a lot of amps in Dallas or Ft Worth Tx after Fu@king me around like that a Happy Customer tells 12 people an Un-Happy customer tells EVERYONE anyway after Much discussion with Djman, and James they agree with Jacob that the 2x 1500d's would be better in the long run over the 3000d for wireing options, as sometimes i use 2x 15" and the next time i will have 4x 15" subs !!! I am so freekin Stoked

okay I can get two 2000s or one 3500 which would be better for two upgraded nightshades? thanks

Put the two SA-8 box in the CRX modified with an 8" aero-port... finally got tuning settled in to 57 Hz as the loudest. Powered by two SAZ-1500Ds... with one Stinger SPP1500D and one Stinger SPV-70. On Powermaster charger for testing. Interior of car is currently gutted to prepare for sound dampening. Here are the results : Score is dB Drag style on the dash legal and sealed up. Little FYI... bought the ports here : 8x20" Flared Ports NEW big raduis

So here's one of the shop run-around cars we managed to snag up a few months ago... an Audi a4 sedan the trunk is pretty much sealed off from the cabin with a full metal diviader with 10by12 ski hatch box is a bit over 2 cubes, tuned to 26Hz Stock bat under the hood Shok Reference 0awg to the back 2 SA10 d2's SAX1200D @ 0.5 ohms very flat from 22 to 37Hz Playing some music Now we add an XS Power D680, a nice 20Ah bat Scores went up and Vic - who designed and made this box this is a great box for music and playing lows...lots of flex and even moves decent air

so i got this 1500d and i have someone who wants to buy it this weekend, what im trying to decide is will the 3000d at 1 ohm be better on my electrical system than 2 1500s strapped @ 2 ohms. its either sell this 1500 and get a 3000, or get another 1500 and strap. if anyone has ran both and could let me know their opinions i'd appreciate it.

2xSA12 + SAZ2500D = 149.4 dbs - SMD Forum Originally posted on SMD by Greg Kashin. ---------- There was a regional comp this weekend and one of the Team Sundown guys was there to take the first place trophy :yahoo: car: Opel Astra OPC subs: 2x SA12's d2 amp: SAZ2500D 72Ah lead-acid under the hood and a Stinger 2150 in the back 149.4 at the comp dbrag legal sealed on the TL here's a vid testing the system a few hours prior to the comp: pics are a few and blurry...hoping to get more info on this later -- here's a nice video of the same car with just one SA12

2xSA12 + SAZ2500D = 149.4 dbs - SMD Forum Originally posted on SMD by Greg Kashin. ---------- There was a regional comp this weekend and one of the Team Sundown guys was there to take the first place trophy :yahoo: car: Opel Astra OPC subs: 2x SA12's d2 amp: SAZ2500D 72Ah lead-acid under the hood and a Stinger 2150 in the back 149.4 at the comp dbrag legal sealed on the TL here's a vid testing the system a few hours prior to the comp: pics are a few and blurry...hoping to get more info on this later -- here's a nice video of the same car with just one SA12

Looking through the owner's anual for my 125.2 and see they have a diagram for 3 channel tri-mode. Anyone using it? How much could I expect going to each speaker? I plan on a another amp for the mids and highs, but I was just wondering.

It has come to our attention that 3 Kings Audio is selling Sundown Audio products. They are NOT authorized and products bought there will NOT carry our manufacturers warranty. All of our authorized online dealers are listed on our web-site. It is only possible for us to ensure the quality of products sold through authorized sources; do not trust an unauthorized source as you also cannot be sure of the authenticity / A-Stock quality of the product. Any dealer or distributor found to be supplying unauthorized online sources will be terminated. We would appreciate any information that anyone may have about the source of these unauthorized products.

System: (3) SA-8 D4's Phoenix Gold ZX600.2 titanium. (1200W @ 2 Ohm bridged) Looking for help designing the box for these bad boys. I've don't see any information on the Sundown site regarding recommended volumes / port sizes / tuning, so here I am... I've played with WinISD some, and basically decided to tune it somewhere around 33 Hz. For those of you that have these bad boys, what tuning do you run, what volume of box, and how many subs? For my build I'm thinking of going with .6 cubes per sub (chambered box) with a slotted port that is 5" x .75" x 16" (slot port inside dimensions). From what WinISD tells me this should be sufficient to run @ 33 Hz tuning, but I want i…

Wat do you guys think would be louder and better option for my camaro ? I have the power for either and about 3.5 cubes for the box after displacement Wats the max guys are running on these new 8s i have heard some where around 800 rms but i would throw around 500 rms to each just wondering if i should invest in these subs Thanks Guys

Saturday I installed 3-Sd1 10" subs and 1 -SAZ 1500 amp in a 1998 Honda Civic 4dr. The subs were in a 3.40 cu.ft ported 3/4" mdf box that was braced accordingly. The ripple was -1.0 / fs was 25hz/fb was tunned to 34 HZ. Enough of the tech mumbo jumbo. I knew the system would sound accurate due to the ripple and natural QTS of the sub ,but I did not think it would be that L.O.U.D!!!!!!! These little ten inch 250 watt subs sounded impressive to say the least. The low freq extensions were accurate and flawless. They are taking the power well. The set up also did not fall flat on it's face in the upper subsonic freq ranges. They were a little sloppy at 60 hz plus but that co…

i am interested in a 3 way component system. reason being, one 2 way component system wouldnt be enough for me. i think a 3 way system would be more broader, with a woofer, a vocal mid range driver and a tweeter. i was looking at focals. model 165 A3 from there "Access" line. im not that particular to where i need to hear them before i buy. im sure i would be satisfied. im use to listening to factorys so any component sysem would probably do me good. anybody have suggestions or experience with a 3 way system? and also is the rated rms power totaled between all speakers on each crossover?

here is a little vid to kinda show the insane flex my nightshades do on my volvo s60.. i have a hari trick vid coming soon.. yes it will do a hair trick.. 8v9c6Lytkyw

Hey everyone I'm, having issues right now with my amp. I don't know too much about wiring and etc but my installer says that the amp I have isn't stable at 2ohm's and won't try 1ohm for fear of blowing the amp. It's stable at 4ohms but thats it, so right I have no idea what to do about it. Is the amp just bad? I ordered it almost two months ago but just installed it today and forgot to even see if I had a warranty when purchasing. Also the amp as it is now is pushing two AA havoc 12's in a sealed box and the amp is just rattling BAD. Like real real bad were it's so annoying and loud that everyone can hear it. So whats going on? Is this amp just bad in both it's st…

anybody know when you would be able to pick up 1 or mybe 3 , and at what the price will they go for? is there going to be a preorder sale or waitting list? i would love to put them whith my 3 btl 18 fully loaded 1 for 1. the numbers seem to smoke my other options (mmats3500.5 or massive p3000.1)

well since some of the team member's have them what is the good word? what ohm you running? voltage? test's result's from amp swap's? any problem's? burp or roll? my first one should be here next week and I want to get ahead of the game.

How reliable are the 3000d's @ 1/2 ohm daily on music?? my set-up will be for a daily driver and for bass race, thats why i ask..

yah just curious if anybody has done any testing above 16.5v resting? possibly 1 ohm testing as well.

Okay here is my somewhat problem. I have a 3000D with a Bass knob and I am trying to figure out how to get this Gain Knob set right. Now I have my gain set, and everything right on my deck, my thing is when I plug in the Knob do I set it to minimum or Max, or do I set the Gain and deck with the Knob already plugged into the amp? I am trying to get it where I can just turn the knob to turn up the gain instead of the deck, which is a pain in the ass. Because as of right now when I turn up the Knob it reaches it full potential at about half instead of max, so I really cant get it to where I want it with that small of a range. So am I doing this sh*t right or what. Thanks En…

does anyone know about how many watts a 300d will put off at a .5 ohm. with high output alternator 3 good batts. and around 14.2 volts?thanks for the help guys.hope to get some good numbers!!!

So what am I looking at for draw on a 3000d at 2 ohms. I'm considering 4 of the sd1v2 10s (ok, I'm considering lots of different setups...anyways) Basically I don't want to pay out my ass on electrical and upgrade my alternator and take up alot of space for batteries. I got a Magnum which has a 160 amp alt stock. What can I get by for batteries. Will a single Powermaster 3100 do it. Almost forgot, front stage will be a pair of sax100.2's. Thanks.

Attention Team Sundown and other customers looking at 3000s. At the current rate of sales the 3000Ds will run out before I get more in stock. This year has shown incredible sales for the 3000Ds, well beyond my predicted averages. Just a heads up so you can make your plans accordingly if you NEED some before they are out. I estimate that they will be out of stock for 4-6 weeks once they are out. As an alternative there will be plenty of 1500Ds in stock during that time.

As of today i finally have 99% of my wiring finished for my second externally regulated alt. Im going to get a volt meter of some sort so i know exactly where I'm sitting at voltage wise at all times (just in case the knob is bumped or any other unforseen issues) So for the next week or so im going to have a very small fuse on both the alt wire and amp wires just to be extra safe. I was just wondering how many of you guys are running the 3000d at 16v (18.8)? and if there's any thing i should know? I'm trying to be as cautious as possible to make sure nothing goes wrong but i thought id ask for advice from the experts

Has anyone tested the 3000ds in a street or street-max application?