Sundown Audio

Second time ever on a meter First time ever competing and I won first in Street C with 145.9. I got there early this morning and was in the lane qualifying within ten minutes of being there. They gave me a CD and I started at 32hz and just went up 3 tracks at a time within 30 seconds until I got to 48hz. I am still not sure where I peak but 48hz was the only track I played on my other 3 runs. Thanks to Sundown Jerry for his advice. Gear: 2 15 Sundown Nightshades 1 SAZ1500 at .5 ohm 1 Powemaster D2400 1 MLA module 145.9 and I think I got more if I can get some meter time to test.

Hi Jacob, just recieve my 100.4 back from warranty. Suppose to be here on Fri 6/20/08 but there is adverse weather.Wannt to say Thank You. Now I can listen to some music.

I got the NS18s today and one of them has a broken basket Ive got pics uploading now Ill put up here as soon as they are done. kinda pisses me off cause the package looked perfectly fine no evidence of problems

i told him to order it before the end of june. he really liked the way it pushed my type r's. also when i bought my amp from chad (lilmaniac2 at roe.com) i didn't get the stickers that you send out normally with the amp. how much would you charge shipped to 62025 for the 2 stickers?

yes if u guys havent seen my van is done for the season because i cannot afford to keep buying a new windshield after i shatter it in 1 burp. i have decided to give the van away to a local shop to use as a marketing gimmic by shattering a windshield at every one of thier comps they hold. im contracted as team sundown this season and i have 3 practically brand new 3000ds that i have no use for now i didnt know if i am allowed to pass them on to other team members that want to buy a 3000d with the new heatsink design since they are on backorder right now. it sucks to have to get rid of a vehicle that wont let me do what i want because the windshield is the issue.…

Allright I will have pictures up in a few days of the Car Event we had in East Texas. With the 3 DC Audio lvl5 18's and 3 SAZ-3000's Music 153.2 Burped at 54 hz 154.3 Box is tuned to 34 hz Used TermLab @ Kick Will be running 3 WMD2 15's this comming up weekend and shooting for 158+

152s here I come. The setup.

The glue on multiple speakers has come off... The glue that holds the spider to the basket. I have my subsonic filter set to around 30hz, and the speakers were getting around 180 watts RMS max

The plan is to run SAZ-1500D on 2 Fi Q15's and 2 SAX-100.4's. A buddy of mine that's an installer at a stereo shop in the area says that running those amps will be fine on my stock 160A alternator if I use a Kinetik 2400 as my starting battery and add a second 2400 as reserve. Is this an accurate statement, or is my buddy gonna inadvertantly kill my alternator? Also will it even be worth it? Cuz even if it works and doesn't hurt anything, will my voltage stay high enough to get rated power?

can i run they sundown @0.5 of i keep the gain down? i have a fi bl 18 dual 1 ohm sub and i dont wont to send it back to get it recone.

as the title says Happy Birthday man hit the big 40 right?

2 stetsom 7kd 2 Sundown 12 inch nightshades 155.0 dbs at 63hz. Direct street B setup, car off, one 6 cell battery. And if someone pm me explaining how to download pictures, I could put the termpro number up!!! Nightshade baby!!! NUFF SAID!!!!! Ray

Any idea on how close a 5 channel amp is to becoming a production reality?

Guys, I am confirming this, I am running 3 SAZ-3000's to 3 DC Audio lvl 5 18's... I have only 1 RCA output off my Deck I had a MLX-100 but does not work... What is the best way to link these amps so they get a signal. Sorry might be a dumb question but I not gunna fry something cause of my lack of knowledge.

Hey Jacob. Alex from DBdesigns INC just ordered 2 1500d's from you today out of his shop in Cumming. Just wondering if you have any idea when they were gonna be able to get shipped out! I need them ASAP!

About how much power with 2 1500d's strapped at 2ohms put out?

Like the title says, I'm mainly curious about the SAX100.2, but also the 100.4. When can we expect availability?

I read the instructions in the FAQ's section but i'm still somewhat confused. If i have (2)saz1500s strapped together i will still be getting a (1ohm) load correct? I am going to be running (2)FI BL - dual 1 so will run into a problem strapping these two amps together for my setup? Should i look into purchasing dual 2's instead

'06 Nissan Altima 2 RF T1 15s & 2 Sundown 1500s '93 Ford Explorer 2 Sundown NightShade 15s & 2 Sundown 1500s Yes they use the AudioControl meter but its still fun and yes we both took first in our classes by a huge margin. I was just over 10db louder then 2nd place in my class.

I have it powering 2 speakers in 2 channel mode bridged. One speaker is on channel 1 (Positive) channel 2 (negative) One speaker is on channel 3 (Positive) channel 4 (negative) RCAs: One line to channel 1+3 (using Y-splitter) One line to channel 2+4 (using Y-splitter) It seems to be working fine, but I am unsure about RCA connection, Did I connect it right? From what I've read, if in bridged mode, then all RCAs need to be filled via Y-Splitters. If I have it hooked up as 1+2 and 3+4, then only 3+4 will play (this is coming from the MIDS input of the HU as I am using the 4 channel to power my mids in bridged mode)

Little project I'm building... These are not available for the general public at this time, sorry guys!

First to post it. HA HA All BS aside I really like it thus far.

Sundown will be CLOSED June 20 - 24th 2008. My brother is getting married and I'll be in Florida. I'll have my lap-top so I'll get to as many e-mails and forum posts as I can... but nothing will ship during that time.

Sundownz,.....have you ever thought about manufacturing some batteries like DC Sound Labs, Cactus Sounds etc.? I thought this would be a nice addition later on down the road for expansion to the company.

need new amp. quick question.... how would it hold up @ .7 ohms? with, 230A alt, Yellow top under hood, Kinetik 2400 in back, 1/0 under hood & back, second run there but not hooked up, It's either .7 or 2.8, two Quad .7 coil subs... TC-3000. I could do two 1500's @ 1.4 ohm each I guess... but I rather like the idea of one big amp... Ideas?