Sundown Audio

Here is another demo video. The song is ET by Katy Perry. Enjoy.

what is the difference on the new heatsink models of the 1500d's and how does it make it better or was it done cause im considering which one to get and i cant seem to find one on db-r that is a new heatsink and am wondering if its worth the wait to get the new heatsink or if the oldones are just as good

Been searching but can't find out what ohm this sub is, is it 2 or 4 ohm? is it SVC or DVC?

I show you a bit of Italian works I hope you enjoy our work are only a few works this is our page facebook: https://www.facebook.com/SundownAudioItaly Fabio Adimari Italian Dealer

What is the total outer diameter of a zv4 12" minus the gasket? I have 13" to mount them in. And no, Im Not talking bout the cut out for the hole to mount them in the box. Lol

Hey jacob, what kind of crossovers will the 250.2 have? will it have crossovers so it can be used in a high powered component setup or will it be a sub amp? Or both?

Hey there all, for all the Canadians wanting a stellar bass package. Check out our new Big Bass Packages!! http://smartass.bz/catalog/index.php/cPath...5d49778fa613223 All the packages are utilizing Sundown Audio amplifiers for only the best in sound re-production. And paired up with the new Bassworx subs. The packages are only available in Canada. But if you US guys want the Bassworx subs let us know. Thanks Jacob

so i just purchased one of the two remaining old heatsink saz-1500d refurbs from chris @ db-r. the shopping experience was great and the price was too good to pass up. i guess im a sundown fan now the hard part is going to be containing my excitement while it gets shipped here to calif.

Jacob, I wanted to commend you on an outstanding product, I recently purchased a sundown 1500d from low-hz.com ... and the amp is absolutely beastly , I had been reading reviews on it for some time now and its everything everyone said it was. keep up the good work Sundown Crew

was just wondering what kind of numbers you all are seeing out of them. i know i already read the amp testing thread was just wondering from other people who are using them as well.

We are opening a sale on our "E" and "NeoPro" lines for the month of February starting today -- the prices are as follows : MODEL // REGULAR MAP // SALE PRICE E-8 v.3 -- $95 -- $80 E-10 -- $105 -- $85 E-12 -- $110 -- $90 E-15 -- $130 -- $105 NeoPro-6.5 -- $99 -- $69.99 NeoPro-8 -- $105 -- $74.99 NeoPro-10 -- $129 -- $89.99 Price is for EACH speaker on the E series and NeoPro series. E series are all available in D2 and D4 coils. NeoPro series are all available in single 4 ohm and single 8 ohm coils. Find a local or online dealer to order : Find a Dealer Dealers can call or e-mail us with any questions on the sale -- may take a few days for the word to get around to all of…

Is it possible to do 100x2 @ 4ohms and then 160x2@2 on the other 2 channels?

Any pics or specs of a prototype yet?Will this have the same crossover section as the 100.4?If it does I will deff purchase one,as the 100.4 is a little too big for my mounting space.

Im in NC and close to Morrisville. Can I come buy a amp instead of shipping? Im that close...

I ordered two shirts from Derrick. (sundown audio, purple) almost 3 weeks ago. I paid with a usps money order i have the receipt. i mailed it on a friday (nov. 11th) derrick and i emailed, he said he can have the shirt to me within 3 days receiving payment.. that was the last email i received from him which was almost 2 weeks ago. i havent received my shirts yet and i emailed him to ask if hes received my money order and he hasnt emailed me back. i understand it was just thanksgiving and black friday but i just would like to know whats going on and if my money was received and if im getting my shirts. has anyone else had trouble ordering shirts?

I am looking for an amp that is 80-90watts at 8 ohms. Will any of the new amps coming out be able to put this out or am I basically stuck with a 100.4 bridged with gains down?

Best Buy/Geek Squad Series Rolls into Antioch TN By: Chris Gregory MECA continued the Best Buy/Geek Squad series on July 5, 2008 in Antioch TN. MECA entered into a cross promotion with Best Buy to host 12 Volt Competitions as well as Car Show and Shines in order to promote Best Buy's new Geek Squad and Autotech services. At the end of the season, competitors who compete in this series are eligible for the Best Buy Points Champion which will be awarded at the Geek Squad Sound fest in October at the Madison TN location. Brian Rozzo made his 2nd appearance in the MECA realm at this event. His Hyundai Tiburon has had on lookers staring at the massive amounts of modificati…

I was driving today and all of a sudden lost my mids. They were actually still playing, but were VERY quiet, had to put my ear right up to them to hear them. My setup is an RF 3sixty.2 doing 2 way active (plus sub) feeding a pair of 100.2's and a 1500d. So far I tried swapping the mids over to the tweeter amp and they work fine, the output on the 3sixty also works fine (I first suspected the 3sixty anyway. The protect light isn't on, no fuses are blown and the amp still works, but is very quiet. If I bring the gain up the speakers get louder, but the amp is being clipped badly and the speakers crackle (they work fine on the tweeter amp). Does anyone know of anything else …

Just got done unloading the trucks... the 15s and 18s are here in stock for the first time. We have additional 12D2 models for any over-flow overs as well. Any 10s either coil or 12D1 we'll still have to build until the next shipment. Also some X-18 in D2 and D4 were on the truck as well as re-stocking quantities of SA-10/12/15 and SD-2 10/12 woofers.

I am a new Sundown Dealer and I have been seeing great results w/ these woofers. BUT...the lack of mounting information is really hurting my leeway to fully expand my designs in limited space builds. I see that mount depth is listed most subs, but motor diameter would REALLY help also. probably an unreasonable request (just wishing) but a google sketch-up model of the subs would make my world exponentially better I just finished an install today w/ 2 SD-2 10's in a '97 ext cab chevy (sealed ~.6cuft each, customer loved it, great low-end response) and I "called" the SD-motor diameter ~7". After crunching some #'s, I figured that I can build a SICK budget setup w/ a sin…

Here is the deal... 5000-watt amplifier (SAZ-5000D) Factory rated specifications: ~4000 @ 13 volts ~5000 @ 14 volts ~7000 @ 18 volts As with the 3000D these are quite likely conservative at the lower voltages as we have found that the 3000Ds produce 3000 watts down to very low voltages. --- $1200 pre-order pricing ($2199 MSRP) 6 month standard warranty * 2 year discounted replacement warranty ** * - Not warrantied for 1/2 ohm operation - this is a given but I want to spell it out just in case. ** - Meaning if you blow it up you will get a replacement at a discount after sending in the blown amp - but it will not be a free replacement / repair like the standard warranty. D…

I have a sax 100.4 and the crossovers on this amp are awesome! My question...Whould an Alpine Imprint Sys improve the sound, or just use the crossovers on the amp.

http://forum.realmofexcursion.com/showthre...4123#post334123 Full Text: Well I just got done testing the 100x4 rms amplifier from Sundown, and I have to say that I am very pleased with the results. This amp showed up in a great looking box, so I opened it up and found all manuals and spec sheets intact. Everything looked just great, so I opened her up to take a look at the guts and take a couple of pics for you guys. http://img.photobucket.com/albums/v643/din.../bananas073.jpg http://img.photobucket.com/albums/v643/din.../bananas079.jpg http://img.photobucket.com/albums/v643/din.../bananas082.jpg http://img.photobucket.com/albums/v643/din.../bananas072.jpg http://img.phot…

Is it possible to buy just the crossovers? I have 2 sets of rokford fosgate 6.5" component sets (don't judge me they were $50 a piece during back Friday locally). They did not come with crrossovers. I have sundown for everything else in my truck.

It looks like I'll finally be getting these bad boys in the car soon. Box is built, kicks are built, just need to mount the 8's in the doors and dress everything up. Soon I'll be installing the actual components and setting everything up. I've never done a ported enclosure before so I'd like to get some advise on the subsonic filter from you guys. This install is with the 2 copper coil 15" nightshades which have a Fs of: Fs: 30.9 Hz settling to around 28 Hz after break in. I have the box tuned to approx 29.5 to 30hz. What should I set my subsonic filter at so I don't unload these things? They will be powered by one SAZ-3000D at 1ohm. Thanks again for all your help.…