Sundown Audio

If i was to be running re audio components all around would the SAX-100.4 be able to power up those speakers pretty good?

I read the instructions in the FAQ's section but i'm still somewhat confused. If i have (2)saz1500s strapped together i will still be getting a (1ohm) load correct? I am going to be running (2)FI BL - dual 1 so will run into a problem strapping these two amps together for my setup? Should i look into purchasing dual 2's instead

Jerome, I responded to your e-mail from both of my e-mail accounts this morning and have responded to you three other times. It seems you are not getting my e-mails - if you are a forum reader I can respond to you here.

So I am in need if the address to send my nightshade in for a recone. Thanks

put the MTs in today on one 3000d @ .5, i wanna get it metered, but its pretty loud with just one amp...when i get both in there its gonna be nasty.

We plugged up one port hole in a box I had laying around the shop and dropped an NS 15 in there to see what would happen. Good times I think we've had too much fun this weekend. Also did a video of a 149.5 run -- my clamp did not register in the video for some reason... but when we did the 149.7 run I clamped 2500 actual watts. VIDEO :

Ok, I have 2 FI BL 18's, D2 ohm now with 2 sundown 1500d's strapped. I still have stock alternator battery up front and powermaster d3100 in back. I am getting another 3100 and missinglink module, and think it comes set at 14.4-15.2v. Now I want to add another 18". Should I run both my 1500d's strapped on the 3 which is 1.3 ohms I believe, or sell them and run 1 saz-3500d?

I know the sensitivity is only up to 6 volts but ill be running 2 3000Ds strapped

Does anyone know if $525 for the saz2000 is the christmas sale price or was that the original set price?

Hello everyone Has anyone use their E8s as midbass yet? If you have, how do they perform and how do you have it set up? thanks..... Brian

I just wanted to say thank you for your great products Jacob. I just put my system in the other day. It consists of 1-12"Sundown Audio Nightshade, a Sundown Audio SAZ-1500D, an old school USamps 4 channel powering a pioneer component set with a Pioneer Premier head unit. The Sundown audio equipment is amazing. Couldn't be any happier with the output. I haven't had it tested yet, but as soon as I do, I will post results. And the assistance making the box and everything about Sundown Audio, is what is going to keep your name and company getting bigger and better. I will definitly be telling all my fellow Army friends about your products, your company and best of all …

Any E-Mails from 5:30 PM - 11:30 PM EST last night were NOT received at my Sundown Audio account due to a domain down-time. If anyone e-mailed me during those times and has not received a response please re-send your e-mail.

SA-12 with D2 coils just sold out about 5 minutes ago. We still have SA-10 D2/D4, SA-12 D4, and SA-15 D2/D4 in stock. A container of all SA series 10,12,15 is due around June 20th. The SA-8s are not due until mid July.

"I got a little dyslexic on the title" I've got a 100.4D on the way and was wondering if anyone has experience with these speakers. There is a $100 difference between these two companies. They are going in a Honda CRV with limited depth. These would probably install without spacer rings. Any other suggestions on component 6.5's would be helpful. I'm trying to stay under $400 http://www.woofersetc.com/index.cfm?fuseac...Product_ID=7038 http://www.subwooferboxshop.com/mm5/mercha...Code=cdtspecial

Haven't been able to find this anywhere... anyone know?

Hey, i'm from germany and just joined Team Sundown, i thought i make a post here, say hi to everyone and tell you a bit about my project. so, my first comp was 3 months ago, since than i competed on 6 competitions and made 5 times first place and 3 times second place. since i'm takin part at more DB Cups than DB Drags, the system will be build after CB Cup specification, i will start in the beginner open oder the climber open class. With my "old" system i was in Climber B in Cup or Extreme 1 in Drag. The car is a 99' Seat Toledo (hatch) Components are Alpine 9886 + PXA H100 (Imprint) Polk Audio SR6500 powered from a Blaupunkt Velocity Burning Desire 1 RE MT18 D2 on a Hi…

Jacob recommend I throw 2 12 SA D4's in my 3 series BMW, and I am going to place the order, but what should i use to power them? Should i just get 1 amp (1500) or get two 1000's. The amp is going to be a sundown model so that's what we are working with.

Hey i have a sundown Saz-1000D amp and my dog chewed through my bass gain control wire. I just wanted to check if there was a certain type of replacement wire i should get or if it didn't have to be the same exact wire. and where do you get those wires? thanks for the help

How many watts will I see out of this amp at this load? Looking at running the JL Thin woofer.

Been here all weekend with customers and whatnot anyway... so decided to drop one in the Jeep real quick. The Jeep hasn't had much love lately and I was using it to haul scrap metal for a while (hence the wooden truck bed) but I decided to break it back out. One 4500D @ 1 ohm with one extra SPV-70 for battery. My box has a pretty high rise so probably seeing 3-4 ohms or so actual on the amp so not a ridiculous amount of juice yet. Sub still has a good bit of usable throw remaining. So I guess the next phase is to actually put in a more usable battery setup for multiple amps and use two amps at 0.5 ohm to get the sub to full stroke. Not sure yet if that will get done …

Hey all, just got my 100.4 from the UPS guy....opended it up, and then realized that it had a remote knob included....I never had a mids/highs amp with a remote knob included...so uh...what is the knob for??? very lame and dumb question, I know Freddy head unit mids/highs & 100.4 all get installed on friday morning at T-Rex audio here in CT..ill post pics and video when I get home most definately

I am replacing my son's existing 100.2/(2)BA G110's with a new 1000D along with the SD1-V2's. I plan on running 1 ohm load with 200+ watts of overhead from the amp. What measurements and adjustments do I need to make to adjust the gains so that my 16 year old son won't blow that crap out of these new subs? With the 100.2 & the BA G110's, they were a perfect 4 ohm bridged 400 watt match. I was told to adjust the gain for an output of 40 volts rms with the subs disconnected @ 3/4 volume. This setup has performed perfectly. Is there an initial setup voltage that I can shoot for that will limit the 1000D to approx 800 watts into a 1 ohm load? Any help will be greatly ap…

ok im sure this info is somewhere but i cant seem to find it.....i have a dual 2 ohm Btl 15 and want to get 2 1500's to strap....are they 1 ohm stable when strapped or only 2

We will be closed Friday for New Years.

Im thinking bout picking one of these up for my daily Warden set-up. Wanted to see what tests have shown in a standard 12/14.4 volt set-up, id be wiring to .5 ohm.