Build Logs

SCION TC Gonna involve the use of: 2 15" ICON's (will have them soon) 1 HIFONICS BRUTUS BRZ2400.1D (already have) 0 Gauge wiring (already done) Big 3 upgrade (already done) Mechman 270a Alt (maybe) Kenwood KDC-X995 head unit Image Dynamics Components, Tweeter, and crossovers for front stage. Image Dynamics Coaxials for rear Stage Boss Audio Zed: Havoc REV-665 (buying from friend) Box designed by me: 7.006 ft^3 after sub displacement, tuned to 32.61 hz will upload pics tomorrow of what is done now. over the last week i have installed the 0 gauge wiring, the HIFONICS amp, and the big 3 upgrade mon will start building the box and will get pics, start to finish.

Hi i was wanting some input from u guys on this design i putting together its for 2 15s aqhdc3s its 8 cub feet with a 15.75x7.75 port tuned to 32 htz with flush and double baffle might go kerf but i dunno its gonna go in a f150 ext cab with subs firing behind driver and port firing up thanks

Nothing much, so far. But I figured I might as well get this started.. things to be done: new box for 15" nightshade d2 amp rack for kicker 1000.1 customize doors for earthquake mids (eventually neo-pros) mechman 250 amp alternator installation rims, tint, headlight bulbs, exhaust system, air filter system, decal, vtec conversion, shocks, springs, LOTS more.. anyway, my ride 1996 Honda Civic EX Coupe non-vtec original paint, not too bad.. may repaint in future. Installed this muffler myself Borla muffler on stock exhaust system lol. will upgrade exhaust system as well Lol, my stock 14" rim with 2% tread on the tire.. i definitely need new wheels! DOHC ftw. lol

Ok this is for a buddy of mine i think he has an account on here, I can't remember though. It is 1 15" Audioque hdc3 aluminum coil on a Sundown saz 3k at 2 ohm, (might talk him into half an ohm at comps lol). As of now he does not have a front stage to brag about, but I'm going to get him hooked up one way or another. He has a pioneer headunit, don't remember what model. Will have big 3 done and a xs power d3400 in the back. (going to also upgrading stock battery, which luckily is already located in the back. And alredy has couple coats of dampner. Box is 4.1 cubes @ 36hz Ok on with the pics. Still have to throw 2 more coats of clear and carpet it, then bui…

Eh i thought i might as well post up my crappy work so far. I am by no means the kind of person that tries to make shit look good from start to finish. As long as it looks great at finish, functions properly, and is pretty well built then i'm ok with it This is going in a 2004 Silverado ECSB. Total vol. will be est. @ 5.2. I'm going to tune lower than i want @ 31hz and expect it to be more at 33-34hz just because that always seems like what happens and that's where i prefer it anyway. Yes that is 1/2" mdf. I had a whole sheet sitting in the shop so i'm going to use that and fiberglass over it so it'll be closer to 3/4. The subs are mounted up and port facing forward wit…

figured id make a new thread since i cant edit the name of my other one lol.. Setup: - JVC KDS88BT Headunit - 4 15" Fi BTL N2 Fully Loaded Subs - SounDigital 16KD Amp - 13ft^3 Wall Tuned to 38hz with 202in^2 of port - Mechman 220a HO Alternator - 6 XS Power D3100 Batteries - Copper Buss bars - 2 Runs of 4/0 Welding Cable - Big 3 - Stinger Digital Volt Meter Car: Stetsom 14K2D: 2 Fi BTL N2s: 4/0 Weldingsupply cable compared to some Tsunami 1/0 wire(4/0 cable on the right): 4/0 ring terminals compared to 1/0 gauge terminals: Interior all stripped out ready to start on the Wall: Headliner out so i can brace the roof... thinking of doing metal flat…

OK, list of goodies SUB AMP: BRUTUS 1200W looking to replace SUBS: 15" DEATH ROWS HIGHS AMP: AUDIOPIPE 2004 HIGHS: IA 6.5 COMPS FRONT AND BACK DOORS ELECTRICAL: XS3400 (UNDER THE HOOD FOR NOW) BIG 2 in 2 gauge This is my daily driver, so it will be my daily ground pounder. Now for some pics gm calls these speakers? the placement is temp i will be putting the tweet in the door. im going to talk my boy who builds my boxes tomorrow for the measurements and all this is what the finished product will resemble

Here is the story behind the 75 buck truck. The tranny went out in the buick , and my mother in law mentioned a friend of hers had a truck that a junk man was scheduled to pick up for 75 bucks. Well i had every intention of paying 75 bucks and selling it to the scrap yard for 300-400. But when i got to the owners house , he said it runs , but its pouring water everywhere. A shop quoted him 1200 bucks for head gaskets. So i decided to crank it up and see what this truck was all about. Come to find out it only needed a freeze plug!!! So i shut my mouth and gave the owner his 75 bucks in exchange for the title. Now another "need to know" tidbit about this build is so far i h…

box is 2.6 or 2.8 @ 34hz going in 06 altima on ap1500 @ .5 Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us

hi guys im buying a 15 in btl n2 (i used to have a 12 btl n2 but some one rear ended me) but i was planning a box and i want a crx box....but i was curious if the sub placement is best over the back by the port or towards the front....just fyi i like the wow factor i doubt it will go on a meter...oh and the port is gonna be centered on the box with a soundstream 2000d

So i just started my build this weekend(tue-wed)for me. The build is simple, not to much to it. 2 Sundown Audio SA-8's Dual 4 ohm 1 hifonics brutus 1200.1 1 xs power d1200 batt. That's all the new stuff i am getting. I already have 1 d1200 under the hood and a 300amp custom built alt. This is going to go with my 2 sets of massive audio rk6 component's and my massive audio 4 channel with a pioneer touch screen dvd3100.

Just realized I have been posting this build everywhere except for here. Allow me to share: :cool: Amps on the left and right, Processor in the middle. The white plexi is going to be for wires to run through from the audio processor. The rest from the amps will go to the left and right of the amp rack.

I posted a topic to get some ideas and feedback about an install in a '80 Corvette and the responces were great. Due to the nature of the design and limited options for this model vehicle and at the request of the owner, we will not be cutting on the doors and using the factory locations in the front of the vehicle. We will however be making some modifications to the rear of the vehicle, but be saving the majority of the space in the rear so that space can be used for the placement of the T-tops when out for a cruise. I/we have discussed the limiting factors of the choices made for the items being installed and the limitations of sound that they can reproduce. The owner h…

Ok my? is i'm putting 1 sa12 in my hatch should i have sub up or sub back forward or what?the port is on the side

Here is my build log. I have a 2008 Jeep Grand Cherokee with two SSA ZCON 12’s. I have the subs, amps and batteries in and just working on getting the electrical and speakers installed. Running low on funds but here is what I have so far.

Hey guys this is my first attempt at an active sound system in my 2007 GMC Sierra classic body. My goals are to achieve good all around sound with a little bump at all volumes, nothing too crazy im not going to be competing. My budget was ~$1000 and plan to keep as much of the install stock looking since theft is high here in Tucson. I been piecing this together over the past few months and is getting closer to install hopefully i can start this weekend. Here is what I have as of now: Head Unit - Pioneer AVH-P4300DVD Front stage – Dayton 6 ½” Classic DC160s-4 & Dayton Classic DC28F-8 Front stage amp – Rockford Fosgate PBR300X4 RCAs & Speaker wire from Mono Pri…

Gonna finally start a build log for my camry. its a sad project thats been going on for months and there has been lots of setbacks but everything is turning up so gonna start posting some pics and some progress. Build is going to consist of 2 Fi BL 12's on a Sundown SAZ-3500. Power is going to consist of a dc 270xp and 3 xs d3400's. Any help is appreciated as far as opinions and stuff would be appreciated.

well i was ofF work today and was able to finally get around to putting them both in. i have them running at 1 ohm to my AQ3500.1 sounds AMAZING and LOUDD. my buddy has given me a good payment on them so they are going to be his in a month or so. i took a few pics as i was installing to show whats going on... yes it is VERY hillbilly rigged in but it works for the time being..... PLEASE DONT HATE.... APPRECIATE

Right of the bat I can tell you this will take a while since its been going on for a while. The wife already said no so now it has to happen. The couch is ready and the fridge is full. Here is a teaser pic. More to follow soon. Belly of the beast

This is my $600 build. Think I did a pretty good job with the gear for the budget I had. What do you think? SA-12D4 on the AB VFL-100.1 @ 2 ohms in a BHE 2.0 @ 30Hz Enclosure Waiting on a few things to be shipped then the install will begin. Thanks for looking.

i think most have seen my last build ..if not here is a few vids http://www.youtube.com/watch?v=GFIkIlI5t7Q

As most of you know I had my DD 9518Z for sale. Well it sold, and I ordered two SSA ZCON 18"s for the PT. A good friend of mine and I started a "Team" but not a team. Lol. Were called "Southern Hertz". To get in our group wont be easy. But well worth it. Notice the shop I'm always working in LOL. This is just the start. :-) Well, I've always hated messy wiring, I know, I'm like the king of it. But it drives me crazy. So tonight. A friend and I decided to fix my issue. We started with this not to shabby. But could be better. Then went in order of these photos. Took everything out. Old amp rack. Batteries. All of it. Started work on amp rack/ battery box. Built it…

I had started a big build last year that I had to end before it was finished. I did not have time to do all of the fiberglassing that I had planned, that's life. I had to have something installed in my car that wasn't going to take years to complete Next year I will be doing an extensive over haul of the current setup. I plan on having more time then, I hope. Some of these pics are from the previous build which I am still using part of. I have more pics to take but this is a start. Current install: HU: Kenwood something of another Front stage: DEI Viper 650.2 Rear fill: Stock Four channel amp: JL Audio XD400/4 Subwoofer: JL Audio 13W6 Subwoofer amp: JL Audio XD600/1 Syn…

Ok, so Im sorta new to SSA and Ive been looking at alot of people build logs and I decided its time to wall my car. Ive already started and this project should get done within the next couple weeks. So heres the specs, 2 FI Q 15 fully loaded, box has 8.2 Cubes after displacement tuned to 33hz. Im open to any feedback and opinions but if your going to be a jack a$$ then dont bother posting, 1 more thing, Im 17 years old and im doing all of this myself with maybe the help of my friend so dont give me crap for being young I know 95% of what im doing, secureing the box to my car is the hardest thing for me, I was think get brackets shaped like this -|_|- from home depot, flat…

So I am building again and taking pics again so here they come. I took them with my phone unfortanatly my G9 broke so for now it gots to do... Here you all go!! 2 10 in the third row of an excursion! Sketchup he was out of town so sent it to him before starting!! might be something I may offer online some time except shipping would have to figured and what not! And theres some shots of the box customer was more than happy