Build Logs

Built this for a Atomic AP/SPL. Sub is getting built with FI parts. Sub parts should be here tuesday and box is ready. This is going to be powered with an audiopipe 1500d and is going in a 2010 honda accord sedan. About 3.3 cubes tuned to 35hz with a single 6" aeroport. I'll be adding some polyfill to see how much better it would sound for the owner. Maybe about 3 lbs worth.

Should have really started this earlier lol. As the title suggests I have an Audi A4 Avant, with a little bass Quick run down of the specs and equipment - Audi A4 Avant 1.9TDI Sport - Alpine 9887R Headunit with full speed iPod connection - Ground Zero GZUC 16SQ - Crystal CAM200.2 - 2 Fully Loaded 15" Fi SP4 Subwoofers - SPL Dynamics D6 - Custom Made Enclosure with Adjustable Tuning - 3 XS Power D3400 Batteries [1 up front and 2 in the back] - Dual 210a Alternators with an external regulator - For the most part Knukonceptz 0gauge OFC Fleks wiring throughout Before this install I've had a number of different set ups in this car. I started off with 2 15" Fi BTLs on a 5kwrms…

OK so gonna start my own bussiness not sure how soon but will start the name for legal reasons.You will see box is done with in the week. Plan to start the name by june 15th or so just to have my name before it gets taken.Will post pics with my name on box after the 15th. The stuff used this time around i usally use nails, but no air tank so using screws and predrilling. finshed three side drilled and screwed one more to go. bought the 90 degree clamps to try them out and i love them. port and sub using XScorpion port. close up of the sub. another of the box.

I decided to build a kind of fart box for a local comp to get higher scores. and while i was designing it i thought i could make a second port for daily use and shove it through my backseat. I wanted to get a box for two 15s in the car but the most space i could get with the design i had in mind was 2.375 cubes per sub and i want more. so ill be using this box for this month then work out a new design based on this new box to get 2 15s in my trunk. this box will be a little over 4 cubes, with an external flared port, and lots of threaded rod and carriage bolts. i spent most of the day getting this far

Where to start, we are doing a wall in this van for promotional use @ shows and events. System will consist of the following. (6) SSA ICON 15D2s (3) JBL GTO 1200II (temp. until power upgrade) Box Deminsions Volume: 12.9ft^3 before displacement per box (two seperate boxes) Port Area: 180in^2 port are (360in^2 in total) Tuned @ 35hz On to the pics of the build so far, we're pulling an all nighter tonight so hopefully we'll have it playing by sun-up.

Well since I've decided to move on from this build it was time to find a new project. So I give you the B2 tahoe.... But really thats all I have so far. The plan is to either move the xc's from the toaster into this and drop down to 4 15's no wall since thats the cone area limit for the class i plan to run. So: 4 15 b2 xc's 4 b2 m1s various b2 hn8's or hn6's and hntt tweeters. b2 quattro amps for highs. will be doing 4 alts but dunno on the amperage yet either 320's or 370's, and no clue on batts yet. and all sky high wire. got a few months before any shows so itll be a little bit before I update this. But I'm excited for the upcoming season.

Well guys, I used to be on this forum day and night last year and for some reason went stupid and sold everything I had audio wise (cept my ufo btl, its not leavn). But I have convinced myself and a little nudges from buddies that I am back in the game. This will be going into a 1997 Grand Am GTs trunk....I also just aquired a 2 door blazer which if I dont sell will be getting a real build. This is my first build log on here, usually just creep round readin. Gonna consist of a single 12 on a 1500-2k amp, not telling what im getting as you guys will see when I get them Will also be showing pictures of my amp rack and all my little details I always like to add. So hope y…

This is my new baby. I've only had it for about a month now. Its a 1974 Dodge Charger. My problem. It only has an AM radio. That a previous owner rudely cut the wires extremely short on. So I've set out to build my own small enclosure to put in an After market DIN receiver under my dash. Not wanting to harm the original hardware any of course. Many more pictures to come. Of all parts of install. Any of your guys' thoughts or opinions would be greatly appreciated!! thanks!!

I received a phone call last night at work from a friend who I have not seen in several months. He moved for our company to start up a new facility. He has done may wild builds in the past some of which I ask him to post. He recently started an account here and ask me to start his build log. So far he has purchased: 8 Kicker cvr 15"s 2 Hifonics XXV Colossus amps Audio Control Epic-160 4 sets of Kicker ds650.2 Deka batteries (not sure of size) He is going to putting this in a Ford minivan and is currently planning on going with a sealed sub enclosure. I am sure that I have forgotten something, but once his membership is approved he will set the build straight. He is inte…

I'm going to be redoing my whole truck, i have some of the equipment listed already and will be buying much more very soon. Truck: 1986 GMC Sonoma Ext Cab Lexani rims Pirelli tires Chameleon paint Stock Interior Equipment: Enclosure: Wall or Blowthrough Subs: (2) 15" or 18" Fi BTL Sub Amp: (2) AQ 2200 Front Stage: (4) Alpine Type R 6.5 component sets Front Stage Amp: (2) Alpine PDX 4.100 Wiring: KnuKonceptz Batt(s): XS Power Sound Deadener: Sound Deadener Showdown Alternator: 350 amp DC Power Heres a picture of my truck: Exterior -- Rims -- First i'm going to be starting on the doors: Doors stock -- Door panels off -- This is the door panel before i touched…

Well, since Fraze(CNC) disappeared with my door panels, 6.5, tweeter, and crossover. Decided to get started myself. Started off slacking on the pics (was anxious and in a hurry lol) I was outta town with work, and showed my dad what I wanted done before I left. He started with this Good thing I made it home before he did any fiberglassing. Now looks like this. Not much had to be cut Rings to space it up, to give it a curvy look Rings to make it flush mounted Bam, waiting for all the glue and what not to setup

Very surprised at the output of these 12s in this setup. Makes me want to sign up to the titan forums just to post it...lol On with the pics.

Robin Butler and Chris Chapman of Bass Heads Ent did an amazing job on my 2 12" PSI Platform 1 Chevy S10 Xtreme build. I could not be any happier, still have to retune and what not, but moves the windshield a bit, still figuring out what music I like to play. Subs: 2 12" PSI Platform 1 Dual 4s- Sub Amplifier: Crescendo Audio BC2000D @ 1 ohm- I am using a PAC LC1 and love it. Head unit: Pioneer Premier DEH-P510UB Mids: 8 Krome Audio KA65s Pro Audios (by Addictive Audio)- Tweeters: 4 Krome Supertweeters- Mids/Highs Amplifier(s): Rockford Fosgate 500.2 & 500.4- Electrical: 50 feet of Audio Technix 1/0 OFC. Optima Red Top under the hood, 2 C&D 138.4 amp hour batteries…

Well I took the wall out after the show on Sunday, and it's time to start building the new box. Me and Alan only pretty much have the new box designed and will build it soon. Box will be 11cubes after displacements with subs behind passenger facing forward, with the port behind the driver facing up. Tuned to 35Hz. And I should have my other 2000 very soon. I'm really excited to get started.

I picked this truck up from my friend a few months ago, I was just going to make it a project truck but the transmission went out on my Dodge so I am going to drive it for a few weeks. It's a bagged 1997 GMC C-1500. It has a massive amount of motor mods, and my favorite part, a 240 amp alternator. :-) My computer has broken so I can't get on much but I will add photo's soon as I can. Idle voltage

Been working up some ideas and have decided to persue the latest idea. Attempting to be LOUD and PIMP looking but is quite the challenge to both. This one is more focused towards looking nice but should through up some descent numbers too. It isn't an SPL focused setup but surely at some point in time this year I will have something more towards SPL... just depends on how this one sounds. I am anxious to build something so here it begins. Here is my dirty VUE Under the hood Cargo Area The Amps! Slot cutting with guide board held down by Josh... so much faster than clamping/moving lol. Thanks Josh! Testing flexibility More flexibility testing Gravity at work

So last January I got the new 2014 fusion SE almost all loaded out. I'm doing an audio upgrade but started this week since it's been so damn cold out. It'll consist of: 2 15" DSS Ethos DD m3b Sundown SA6.5 comps (passive) Incriminator IA 3.4 Stock alt (I think 140) Die Hard Platinum G31 2/0 welding supply wire Stock H/U with LC2i I will upload pics later tonight if I get time. I'm finishing the box now. Just putting some extra bracing in then top goes on. Box is 6.5 cubes tuned to 31hz with 2 6" PVC pipes. I know it's not the best but it should do just fine.

Finally got time to take pictures of my build its only 75% done I would say. I am still not satisfied with my midbass I am runing passive at the moment and I have sounddeadned and filled the kick panels with poly fiber fill. any suggestions are appreciated. rainbow slc365.25 with dd t2 tweeters (Plan on getting some cal26 tweets soon) ssa xcon 12" dual 2 ohm Lightning audio la-3000md I would say its giving it close to 1500 rms and soundstream stl4.500 for the highs (I plan on changing this amp asap) Dont mind the tape on the amp... Some pictures of my car

Did some figuring on a financial situation. And sold everything....Happy being Debt free now but not so happy to downgrade. New s10 setup PIONEER PREMIER FHP800BT 4 RE SX10D4"s 2 Planet Audio BB2400.1s 4 Locally built 1200 cca Thomas Batteries 2 ACdelco AD230 200amp alternators And all the trimmings Will get some pics and specs up on into the week. Im thinking it should turn out quite nicely but im sure it will not be near what i had. But its all gravy

sorry been awhile been workin my ass of,,thought you guys would get a kick out of this,,,the pics are about a month old,,,cars at detail now,,and getting ready to hit the streets ........Stereo........... Atomic 1600.1 Atomic Trinity 504 3 Atomic Quantum 10s Kenwood DDX712 ........Suspension.......... 8-GC Extreme 1/2 inch valves 4 LRD-80 Air cylinders 2 Viar 360c Compressors 1 7 gallon Air tank AirBox Wireless Controller Ingalls Engineering Adjustable Cambers Was a fun install,,in a strange way kinda sad its done.......sigh...go figure

Alright, box is still in planning stages. But just got the sub and amp in today. I loves me some 15" atomic This will just be a trunker in my 97 Grand Am, nothing serious, that's what I bought this for But yeah, build on that won't start until spring

Well it has been ssssuuuuuppppeeerrrr long since I built this, and I'm just now posting it up. Put 'er together right after school let out, had it in before the first week of summer even finished. Not really even been on the forum, college is a beotch. Equipment list: Subs(New): SA-8 x2 in 1.? tuned to 30-32 Amp(Old): SAZ-1000D HU(Old): Pioneer DEH-11E Ye ole coaxials(Old): A series 6.5s x4 Batttttmang(New): XS Power D1200 and S1200, (never installed) Power/ground(Old): Welding cable!!!! 4awg Speaker wire(New): Knu Klear 10awg

What do you guys think would be best for 2 fi Bl 18" box wise. 26"H x 37"W x 30"D giving it 14 cubic feet 24"H x 36"W x 40"D giving it 17 cubic feet 24"H x 34"W x 45"D giving it 18 cubic feet I am going to be getting 2 AQ1200d for each sub. I want it to hit pretty hard. I will be posting up some pics of the build that will get chosen the most. Thanks!

This is our Geek Squad Bug that I am building a system for our car that we putting in a car show on the 28th of Feb. I am going to start fiberglassing the box an the amp rack tommorrow. I will upload some more pics as i go. thanks for looking.

http://www.soundsolutionsaudio.com/forum/uploads/1259383953/gallery_11929_336_33013.jpg http://www.soundsolutionsaudio.com/forum/uploads/1259383953/gallery_11929_336_15077.jpg http://www.soundsolutionsaudio.com/forum/uploads/1259383953/gallery_11929_336_31612.jpg http://www.soundsolutionsaudio.com/forum/uploads/1259383953/gallery_11929_336_24812.jpg