Build Logs

so im building a CNC machine capable of cutting full sheets of MDF, wood, plexi etc.. my goal is to be able to produce these for sale most cnc's that cut 4x8 sheets cost upwards of 100k and the backyard ones that you see aren't that accurate (over 1/16th inch accuracy) and still cost 4-7000 dollars, my goal is to get them build for under 2500 so anyways onto the build pics thats the render of the final product another render y and z axis

Equipment list: - Eclipse cd7000(fully active) - Zapco reference 1100.1(800 x1 @4ohm ) - Stereo Integrity Mag 12" d2(wired to 4ohms) 1.3 cube box sealed with polyfil - Avionixx 440.4 - Hertz HSK165s component set - Second Skin Deadening - Audio Control Epicenter(not being used) - Knu Accessories -plenty of techflex :tasty: pics: this is my favorite part, its the spare wheel screw, so my box is fully secured to the frame amprack: support beams:

I'm transferring this over from another forum/ Some things might be out of order. I'm getting the car for next to nothing but it needs some work. So far I have replaced both front control arms and sway bar links. I'm redoing all of the front end (P/S pump, racl etc.) The sway bar bushing look swollen, so those are going to be ordered too. I'm hearing a slight "clunk" when I throw it in to reverse which I believe is either a bushing on the rearend or the flex bushing on the drive shaft. The carrier bearing is new, so I don't think that's it. The car has 209k on it. I'm also going to be ordering new plugs. Service the trans and rearend. I have a fair amount of cosm…

Greetings and salutations beings of the internet. I come bearing random thoughts ramblings and a build log. This will be version 3 of my 2004 suburban. The setup: Sony XAV-701HD Stevens Audio Full Size Horns Beyma 8BR40 8" Mids Arc PS8 Bazooka MGA series Amps Stereo Integrity DS4 18 sealed 6cuft This is also the simplest iteration. I employed the KISADUWDATTDT method: Keep It Simple And Don't Upgrade When Done And Tune The Damn Thing. Just a little FYI the horn install happened a few years ago. This a compilation of a build that spanned a few years. Up first are the horns. You've seen one you've seen them all but just in case here is a pic.…

Budget Build, It is going to take awhile to get everything sorted out but right now this is my plan. Green = Decided Red = Undecided 1 Pioneer 80-Prs (active) 1 Crescendo 1100.4 - On Subs 1 Soundstream rubicon 2.600 - On Mids 1 Stetsom 200.2 or Lanzar VCT 4ch - On Highs 2 Crescendo ft1s 2 Crescendo 6.5s 2 Crescendo 10s or 8s 4 SSA Dcon 15s in a slide-in wall. tuned between 32-35. Around 170in of Port. 1 Mechman 270-320amp Alt 2 Diehard platinums @ front 2 HC1200 @ amps 1 Stinger voltage meter Audiotechnix 0g Audiotechnix 12g Audiotechnix Premium Rcas Audiotechnix 80mil Eventually I'll switch from the Dcons to something bigger, but for now 4 Dcons is the plan. Tha…

This isnt gonna be anything crazy but heres what i got so far. I got polk audio 2ways in all the doors, pioneer 5200 HU. Over the past few days ive been laying down Fatmat rattletrap in the car. I got the whole trunk done with one layer and the outsides of all the doors are done too. I was thinking of doing the roof or the floors but im lazy and dont wanna rip it all apart. I only took a few pics of the trunk and dident get any of the doors (sorry). I have just ordered an FI SSD12 and will be building a box this weekend for it. Its gonna be sealed 1.25cubes BEFORE displacement. I'll try to take some good pics during the build. Thanx for looking and here are some …

well my instill is fully underway it's been put on hold and i've had some setbacks along the way but i think it will be worth the wait. no pic's or videos yet but i'll give you guys some info on the build. -2001 tahoe -new 145ampalternator -50f of kca 1/0 cable -big 3 -Kinetik HC2000 -amp brz2100d -4 15' d-con s1 subs-enclosure 20 c.f after port/sub/bracing displacement, over 210'' of port @ 28hz updates coming up real soon i'll have it bumpin next week.

I figure I will just dump everything here. Prior setup (Sub stage taken out, keeping front stage) -Alpine Type-R 12" -Kenwood KAC 9104D (Rated for 900w RMS but we know it only puts out 600w) -2.25 cu ft enclosure tuned to 32hz -Kicker 4 gauge wire -Alpine 4 channel amp (45x4) -Pioneer 5x7's (Only running front 2) -Pioneer DEH-X8500 New Setup -Stereo Integrity HT 18" -4th Order designed by Hunter Martin -Pioneer GM-D9601 (@2ohm doing 800w) -Audio Technix 0 gauge kit -Audio Technix Big 3 kit -PAC LC-1 -Other little things for wiring Before And everything yanked out Things that are going in All going in I will update this as the build comes al…

well me and one of my friends decided to start up a build on a wall for 3 15" BTLs... come to find out only 2 will fit but its all goot 2 BTLs it is front stage is yet to be figured out along with the sub amp.. 2 runs of 1/0 for power 1 run of 1/0 for ground phase linear touch screen ps2 8" lcd in airbag lots of fiberglass work bla bla bla heres the pics the car.. 3% tint all around, 3 rear windows are spraypainted black inside no longer transparent stripping the car

im about to start my build for my very first system. its going in a 1997 honda accord and its nothing big like alot of people on here but hey you got to start somewhere. whats going in my car: alpine type r 10 alpine mrp-m500 alpine sps-600 kenwood kdc-mp242 i will post pics but idk how to so can someone tell me how to post pictures

well the time has come that my stock bose unit is starting to take a crap. its a pretty well known problem in these cars. so i am going to be switching it all out slowly i already have two Fi SSD 10s in a ported box. right now they are being powered by one audiopipe apsm-1300. each only getting 300wrms. which sounds pretty good for now. all the speakers are stock and so is the deck. plans - on its way is - another audiopipe apsm-1300 so that i can run one amp for each sub. (yes i know i could have just got a big enough amp to run both subs. but im not doing that) will be running 1000wrms to each sub a metra dash kit for the new deck. Kenwood Excelon KDC-X794 de…

This Is my 2006 Buick Rendezvous CXL. This will be my 3rd rebuild and final build of this year for M.E.C.A finals. I currently have the state record in Arizona in street 4 (SPL) Vehicle breakdown: Pioneer Avh-6800DVD DC Power 270 xp alt. XS Power D3400 in front , 1 D3100 in the rear (ordering 1 more) 2 runs of 1/0 2 RF T3000.1BDs 2 or 3 Hybrid 18s - not sure yet (built by robot underground) 1 RF (modded) 200a4 (mids and highs) Infinity kappa 6 1/2 in the rear doors, haven't decided on front stage yet. I will keep this build up to date as much as possible, ENJOY! The amp on the right is my 4 channel

Well guys I been on this forum for a lil while and its overdue that I make a build log. I dont have much $ flow to work with so, I have to sacrifice some things to get what I have. This enclosure was originally for a 15" Fi BL, it was 3.5 ft sq, tuned to 34hz. I redid it for a 15" FI BTL. Pretty much took the face off and had help from a friend guide me through it. This was a quick fix for my enclosure and it still holding on. I dont hve much pics of the build log, but I will post what I have. I redid the enclosure to 4 ft sq tuned to 34Hz. I used PVC for aeros and flared them, but not so good job.

94 astro 15 layers 8 neo pro 8s and 4 selenium t 350 tweets and 2 sundown 100.4 door riping/ and trim falling off mechman 320 alt/ with reg ass lifted The new Midwestspl etreme 4 record, 146.2 30sec. adverage 12" out passenger window.

I just purchased a 15" sp4 d1 with all the bells and whistles. Now i have read that it is best in a 4th order enclosure. In the Fi specs it states its 3-5 cubes in 4th order enclosure. Now my question is then since im a newbie at 4th order. Is this correct: ported side 5 cubes so sealed side has to be half that so 2.5/2.71(counting woofer displacement) or should the motor be in the ported side? and what do i have to tune the ported side to? what is the best tuning for this sub? This is going in a 2012 chrysler 300. I will be running a kicker zx2500.1 at 2 ohms (that should be enough power right?) . My buddy said 65 herts so is that correct? I listen to alot of dubstep and…

So I'm gonna make one anyway, so why not start now. The current equipment: Kenwood Excelon KDC-X692 Pioneer 3 way 6x9's(4)(1 in each front door and 2 in the rear deck) Bazooka EL500.1 Crappy Scoshe wiring for sub amp 2 MTX RoadThunder 12's(sealed pre-fab box) Excluding the Headunit, everything is not as good as I want. I have 3 shipping boxes in my trunk right now that contain: TEAC 2x100 amp(bought for $15 from Spy. Thanks dude) Phoenix Gold RSD6CS 6" Components KnuKonceptz Kolossus Fleks 4 Gauge 4 Amplifier Installation Kit I hope to make the speaker adapter(for the 6" to fit in the door) and install the comps pretty soon. I'm also removing rear fill. After that, its …

I did this install last summer. I know everyone likes to look at pics, so I posted up this build for entertainment. Parts List: 2 ~ 4x6" dash plate Infinity Kappa 2 ~ 6-1/2" Door Infinity Kappa 3-way 2 ~ 1" Infinity Kappa Tweets 2 ~ 6x9" Infinity Kappa 3-way 4 ~ T115D2 Rockford Fosgate Power 2 ~ T1500-1bd Rockford Fosgate Power (Powering the subs) 1 ~ T600-4 Rockford Fosgate Power (mids and highs) 1 ~ Stinger SP1700 battery Jensen VM9312HD Flip out DVD H/U Iraggi 300 amp H/O alternator All Stinger wire and terminals Installed by yours truely!

this is an extreme build, no fucks are given about competing unless they make a class that measures how windy your shit is, goals are 15-40hz with as much output as possible, car is a daily driver, lets get it goin. relocated the head unit to the old cassette player location so I can do a modified dash bezel to hold an ipad and other shit doors were up first, single Crossfire XS 10", sealed up, midbass for days glassing bolts in so i can secure the pods to the door easily and securely teaching my boy how to glass

Ok so this is my first time trying to build an enclosure on my own so it will probably end up looking a little rough. I started cutting yesterday and some of the pieces didnt turn out so well so I'm re-doing a few today. I will have some pics up later tonight when I finish. The enclosure will be right around 1ft^3 with a 3inch aeroport after all displacements. I'll be picking up either a 10'' Icon or 10'' bl when I get some more money. I'm looking for a daily pounder that can replace two 12'' kappa perfects that were sealed. Do the flared precision ports need a special type of 90 degree elbow in order to make a bend or can I just use any old elbow?

So recently my brother crashed his car it was his college present from my parents he had it for like 3 yrs and my parents had only liability insurance I'm only 15 and my bro said if i fixed it it would be mine but once im able to drive(1 year) so lil by lil I've been fixing it. The side that was crashed messed up both struts so I was like ill get some coilovers so i got the coilovers on by myself then i needed a fender ordered it and now i bought 2 doors so for now i just need the rear bumper and quarter panel. The guy from the bumper said 1600 to fix it without the parts so i bought him the parts now i just need 1600 to finish it and like 400 for some details here and th…

Well im gunna go ahead and start the log even though i won't have everything in until monday. Whats going in - 2 DC lvl 4 xl 18s Sundown 3000D Batcap 2000 All knukonceptz wiring Pioneer DEH-4100 What its going in - Shitty pic but you get the idea. More to come..

I Work at Audio Adrenaline 2517 Great Western Suite P Prescott Valley,Az (928)772-7785 Here are some of the projects we have had or are working on.. I will keep you all posted on my new projects..

hey fellas. so I work 6 days a week. I don't have a lot of free time so this will be a bit slow so sorry for that. I have some pics of a build I did May of 2014 that I'm going to post right now. I'm planning on rebuilding it completely. so here's some pics of what ive got going on right now.

i promise, this is the final plan. i was talking with Little Jon (white van, 16 12" ssd's) and hes like just wall it, and that gave me some ideas, so i just got home, measured in the back, and this is what i came up with. of course im not sure on the port yet, or what subs, deff not gonna be like the truck though. its going to be built outside the car, and slide right in and bolt to the floor. it will be completely removeable, and the seats will be able to be put right back in, if i ever decide to take the wall out. all the side trim, etc is staying in, and nothing is getting screwd thru it, or cut, or anything like that to mess it up. it will be right up to the front sea…

Okay, this little build will be going into my 1992 Oldsmobile 88. I bought the car about 7 years ago right after I started working for the pipeline I'm working for now. I got a hell of a deal on it and got it so that I had a car just for driving to work so my wife would still have the van to drive at home. I only drove the car for a couple of years before I bought the Jimmy and right after that I gave the Olds to my mother and father in law to drive because their car broke down and my mother in law was having to run around to doctors and things for her cancer treatments and such. Well fast forward from then and I find myself with the Jimmy out of commission and my fat…