Build Logs

http://fresnoracing.ipbhost.com/index.php?showtopic=30159 Please follow the link above. Be ready to load over 110+ pictures of the buildup so far. Here is a diagram for the cooling system. I encourage you too keep checking the thread for updates. Thanks for looking. http://fresnoracing.ipbhost.com/index.php?showforum=32 Click here for other installs and projects.

My little brother is putting a system together for this years competition season. He will be competing in USACI's street beat. Its a 2003 (I believe) Hyundai Accent. He is using a real basic pioneer deck for now with an update in the future. Two runs of 0 gauge running back to a single US-AMPS 6000 pushing a single Hyfonics Goliath 15. Here are a few pics of the progress so far. We are a little behind because of orders not coming in, but it should be done in a week or so. I used the RFL for comparison only, its the first sub to come close to its size but still just a little bigger. We are finishing the trunk in black suede and the amp will "float" behind the …

If you want to see pics of the car, they are posted in the Show Off section. Finally got her in =) and absolutley love her, but the stereo must be swapped, of course. This will be a slow build, so be patient with me. Here is the layout so far: Alpine CDA-9887 Image Dynamics CD1Pro Horns Dayton RS-225s Sundown 100.4 15" Sundown Nightshade (a lil beefed up) Sundown SAZ-3000 On to pics... first off does anyone know where I can get these same straps I have holding down the wires... but a lot bigger... say to fit all the wires in one, or able to lay the wires flat across?? I figured one of you guys would know, these are all I found at Lowes and I am not to happy with how to lo…

So time to change something and it's this damn rectangular box....it's loud but takes up too much room and is ugly so instead i will make something to go on the left side and rplace this I lost the pic of fiberglassing work but this is what came out Then The baffle and trim piece Ports, only about 9 sqaure inches per ft3 but I don't really have room for anymore coming together and fiberglassing this to trim out the back of enclosure

so my good buddy Carlos has been wanting to do something different for a while... hes been running a single Dc Audio Level 6 18 for a few months but it wasnt satisfying that itch, he told me he wanted to build a wall but wasnt sure what he wanted, other then the fact that he wanted it to stand out and be different.. haha, no problem.. how about we just build a sub thats never been built before and give it a gorgeous install to go with.. sounds like a plan... onto the pics shell underway, angles angles angles.............. haha, time consuming as a MF some 1/4 monster "L-Brackets, every piece of this shell is 1.5" thick, very strong... all holes filled…

This is a never ending work log that I should of thrown together months ago, but am too lazy to do. I call it work in progress because I feel as if it can never be finished. Most of it is done with, but there is always something I can do to better my install. This is my second install in my Ford Explorer, the first being a single 12" RE SX ported to 32Hz in a 3 cu. ft. box. It was powered by a RE 12.1 amp. Enough about my old install lets get back to my pride and joy. My new set-up is: (2) Two 12" Fi Q Orion 2500d CarPC 400W inverter for Playstation Lilliput Touchscreen My favorite part about my install is my false floor. I wanted to design a floor, so I could easily get…

I've had some equipment laying around for over 2 years, and my wife wants a little bit of bass. I figure I may as well make the most of what I have, which chances are will be more than she'll ever use anyway. Her car: Chevy Malibu Equipment: Alpine 9885 Alpine Type-X 12 D4 Hifonics 2006d Enclosure: ~1.5ft net tuned to 36hz with 24sqin of port. She wants a little bass, and plenty of room to put groceries. Also no wires or equipment hanging out like most drop in installs. This is really temporary until she gets a new car some time this year. The equipment: Of course I had to draw up some plans and it starts at the kitchen table: A MS Paint drawing of what I'm going for…

New Amps. Temp mids/highs setup till the box gets built. Subs. First family photo. Kids are excited as I am. Son wanted to show me he could lift it.

Today i decided to pull my box out and do a resand to remove some dings and dents, while it was out i thought ild take a few pics of my system. The head unit it an alpine dont remember the modle but heres a pic Treo 4 by 6's in the front doors Im In the prosess of cuting holes in the back panles for peerless 6.5's Now pics of the box its made of maple and has two peerless 8's in it. Undercoating in the wheel well Powerd by a zappco 750

Pics were upside down, new links with correct pics edited!

Hu guys, This is my third box for my sub. It's the loudest one! Now, I feel That I have a really powerful system !!! The design is coming from Bromo. I bought the2 4" ports at Madisound : it was a pleasure to deal with them. Fast (very fast) answers, they shipped my order the next day, and they gave me the choice for the shipper. Loved it ! first box was a L ported box : 3.5 ft3 at 32 hz with sub and port up. It was taking ALL my cargo space and was not really powerful. I can't understand why; it was sooo loud in another smaller car with the same sub. second box was 3 ft3 sealed, firing up or back : I lke it, seems louder than the first one ! More cargo space left, This…

SCION TC Gonna involve the use of: 2 15" ICON's (will have them soon) 1 HIFONICS BRUTUS BRZ2400.1D (already have) 0 Gauge wiring (already done) Big 3 upgrade (already done) Mechman 270a Alt (maybe) Kenwood KDC-X995 head unit Image Dynamics Components, Tweeter, and crossovers for front stage. Image Dynamics Coaxials for rear Stage Boss Audio Zed: Havoc REV-665 (buying from friend) Box designed by me: 7.006 ft^3 after sub displacement, tuned to 32.61 hz will upload pics tomorrow of what is done now. over the last week i have installed the 0 gauge wiring, the HIFONICS amp, and the big 3 upgrade mon will start building the box and will get pics, start to finish.

This is a build for the 8" Bravox PXW subwoofer. The enclosure is 0.7cuft @ 30Hz after displacement. Power is 240watt plate amp. Finished!! What you guys think? I'm running it off a 240w plate amp and IT SOUNDS AMAZING. So clean and smooth. Fills my whole room and even rattles the walls. Did not expect this build to have such a good turn out. After displacement it is .7cuft tuned to 30Hz.

2008 GMC Yukon JVC arsenal 4v Headunit SSA 6.5 EVIL mids in front doors Soundqubed deadener in front doors Second Skin speaker tweakers SMD dual ANL fuse holder SSA EVIL 18"s D2--(2) Ampere Audio 3800 @ .5 ohm SKY HIGH wire throughout- 2 runs of 1/0 cca 1/0 OFC grounds and from battery to amp 4g ofc on subs an to amplifier SHCA 1/0 inputs an 4g to 8g inputs ILL CUSTOMZ battery terminals an 1/0 inputs XS XP3000 battery Knuconzepts RCAs enclosure is 12 cubes before bracing an sub disp tuned to 29hz

I figured I should post this build as it's going to be completed by June 24, 2011. Which is the first day of Scrapin' The Coast. This is a build on a budget, just as all my previous builds have been. I'm 17 and install on the side.. Co-owner of SouthSlap.com. This is my 4th personal build to date. My last build was 6 T3 Audio T400 12s in a 2004 Tahoe on 2k. The platform for the build is a 1990 Honda Accord Coupe. 216,000 miles. All original. It's being painted this coming Monday, new tires on Tuesday, and lowered on Wednesday. Specs include: 4 - Vibe Audio Black Air II 12s 3 - sets of Vibe Audio SA50 Components 2 - Mids/Highs amps 1 - Hifonics Brutus 1600 1 - Shuriken 6…

Well this is the first time starting a build log on here so ill do my best. Not anything major just something small for her. The car is a 1997 Isuzu Rodeo HU: Kenwood Excelon KDC-X395 Amp: SAZ-1000D Sub: Sundown SA-8......box around .6 cu ft tuned to 34hz. Front doors have 4" speakers and tweeters but not sure what to replace with, so if you have and suggestions let me know Today the HU is coming in so will get pics of that, and i will be running the wires for the amp since i already have it. more pics to come soon

I have a 2013 Chrysler 300 Base Model i'm installing a new system into by myself. Right now everything is stock. Watch my videos to hear my story, my goals and see my progress. Any advice is much appreciated! Many Goals. Ill edit this post with a spec list and whatever I can think of when I have time. Introduction https://youtu.be/xle8qN4l3Wk PART 2 https://youtu.be/owV6edKeDzE PART 3 https://youtu.be/eE4JhrF3eS8

Figured I would get some pictures up of the stereo build up for my mustang. Nothing really over the top or crazy. Just wanting to improve on sound since its my DD. Quick pic of the car: IMG_0271 by riored4v, on Flickr Stereo so far: Stock HU AudioControl LC6i Audioque 1200d amp Knu wiring Infinity Kappa 6829CF speakers in the doors & rear deck 12" SSA ICON Originally had a 12" Image Dynamics IDQ setup that I was using previously. Worked well, but wanted more. Didn't initally want to go sealed, but the ported enclosure for the ICON was going to take too much space to work properly. The "skirt" underneath the box shows where the old ported enclosure came …

First of all the credit is due to Ramos and Matt for all the long,but fun weekends, on this build. I know I learned tons from Ramos, cooking techniques, and how to make perfect circles with a plunge router upside down and not lose a finger......well anyway here are the finished pics.... The MS1000TA in all it's glory! Another shot from the other side looking straight back(don't worry the SoundDown will get a clear plexi too,just need longer screws) The P9..... another shot there ya have it guys.......feel free to leave comments.......and no it's doesn't sound like the Magnum(or as good)

got my hands on a mint 12" Punch HX2 , I can not resist building an enclosure to play with this thing..... no table saw or router so I'm skill and jig sawing this one

not my vehicle for a friend Equipment: 18" Fi Q fully loaded 6 cu. ft tuned to 33 hz APSM 2000 Sony 4 channel for mids Pioneer 7" DVD Cerwin Vega 6.5" coaxials Cerwin Vega 6x9 coaxials four 8" elemental designs Custom Headliner

Cut the hole for the speaker. i wanted it as small as possible so it barely cleared the magnet.... i ended up having to make a slot for the wires thou I didn't get any pictures of the speaker ring but it had a roundover instead of being flat and had a kurff cut so it would bend with the dash. Nothing major just a slight bend BUT it made a huge difference in the end result. These pics are in mid sanding thou, the ring was fiberglassed to the dash popped off and i snapped some pics after the first stage of sanding After looking at it on the dash half way ready i realized the orange wasn't going to work... So i painted the speaker while the final sanding and stuff was bei…

Its in the SPL vehicle a lil build in the console powered by a crossfire vr1000d b4 and stock opened stock pulled out.... YES THOSE ARE MARTIN LOGANS in the back ground stripped from all screws Box built to .5 cubes sealed Stripped all tabs Insert box lol Foamed for maximum sound downfiring The sub Installed sub Mounted and secured all rattles and there was alot of it This is going on the front stage I thought id measure my front stage just to see what itll do. first is a vid awhile back of some flex on the roof..... lol scroll down and see what i hit on a TL. All on music door open and the mic on the floor board. I was just browsing thru my ipo…

The box is not finished yet, sorry not more pictures of the build to busy, but i still have to router the port the top and paint it, and I may even cut an inch of the box out somewhere bc it is a little to tall but we will see. Amps should be where wednesday I hope, and with them i still have to run power and ground to the back and get another battery and a new atternater but atternater will probably be the last thing i buy. Thats all for now but it's in and pounding