Build Logs

What do you guys think would be best for 2 fi Bl 18" box wise. 26"H x 37"W x 30"D giving it 14 cubic feet 24"H x 36"W x 40"D giving it 17 cubic feet 24"H x 34"W x 45"D giving it 18 cubic feet I am going to be getting 2 AQ1200d for each sub. I want it to hit pretty hard. I will be posting up some pics of the build that will get chosen the most. Thanks!

Let me first start by saying I have mad respect for walls or laying down seats you don't need for more room. But for me I like the challenge of keeping my room, always have. I have a wife and 4 kids that still ride with me in a daily basis. I've always liked it loud but you also got to be able to hear the words clearly. So with this build I wanted to compete, not to win just for fun, and keep all of my seating. I bought an American Bass XFL 15 when I had my van and still had my 12-15 year old Diamond Audio Amps. When I got the Durango I built a sub back port back box and fastened the amps to the back of the seat. It was basic clean looking even though I never finished the…

Buddy of mine picked up a nice looking 87 caprice today for a daily driver. So far it runs good interior looks good ntohing wrong with it just needs a nice cleaning and such. This will be a long slow project but will end up being nice. Def a SSA subs

Figured I would give y'all something to look at. This build is for my little brother in his 95 Burb. Head unit... pioneer deh7500had Amps... Two bc2k's on subs, CT sound 125.4 on mids and highs Subs... Two Sundown X18's Box.... 14cu tuned at 30hz... 207sq in of port Subs up port to side, cause I want to..... Front stage.... Sundown Neo-Pro 8's, Nendo FT1's on dash pillar pods. Electrical.... Big 3 with all 2/0, two Die Hard Platinums gr34's underHood Pics to follow.

There are two things I have never had since I got "serious" into car audio. A 10" sub, or a decent dual sub setup. So this is my build for two 10" xcons! Im super excited, they should be finished building and arriving soon, I hope. I am fitting the maximum dimensions of my trunk while still being able to fold up the stock floor and access the spare tire. I was left with 3.11 internal cubic feet without sub, bracing, 45s, or port displacement. This is firing into the car, so I also needed the subs and port to be on the same face. The triangle port is unconventional but takes up less volume than a typical slot port inside the box and also has less port wall surfa…

What up fellows gonna start this but it will be a while before completion due to not having a full time job and going to school. Well onto the goodies Batteries: 8 100ah Braile Batteries (ALREADY HAVE) Alts: (not sure on # yet) but thinking at least 1 300 amp alts from Excessive Amperage Sub Amps: 2 DC 3.5ks Mids Amp: Sundown 200.4 (ALREADY HAVE) Highs Amp: Sundown 125.2 Subs: 6 12" GPI Temperamentals (PAID FOR) Midrange: 2 6.5" Selenium 6w4p(per door) (ALREADY HAVE) Midbass: 1 8" Selenium Mb4p(per door) (ALREADY HAVE) Highs: 1 St350(per door) (ALREADY HAVE) INSTALL ACCESSORIES Will be installed by SCOTT BOWMAN

Ok here I go again with another truck box build. This box will be house a single 12" driver either my SI Claw Mag 12" or my Sonic FX Q 12" depending on which performs better. Specs are as follow, 2.54@30Hz 20"^2 of port Really hoping to get some gut pounding lows out of this box. My current box hits them decent but I want better more defined lows. So enough talk, on with the pics.... Just started this build tonight. Got a good chunk done. Right now everything is being dry fitted before I get all glue happy. It will be put together with screws and TightBond II. Sub will be set back into the box to allow for space for excursion. Still debating on going round or …

Didn't find a category for this but it is somewhat a build log and there are no guidelines that say it has to be about car audio. So, I took a break from messing with the Camry for about 1 week or so.... This is what kept my time...Let me know what you guys think... This was the original desk, second-hand but looks like it was maybe from Kmart or Staples... Notice the bow in the center? The desk was perfect for about 1.5yrs and I'm assuming the "compressed wood" could not handle the weight of my desk mount arm for my 24" monitor: Items bought at Home Depot: Transformation: Everything set up again:

gotta give a big shootout to robin (iamamp3pimp) for helping me with this, he does GREAT WORK!!! so if you need some work done hit him up.... and this is a shot of the first 3piece put together with my new table saw. holy hell this thing is accurate. Strange looking end grain from lowes Lumber department..... Double Baffle, Split front baffle, etc. Edges rounded over 1/4 inch for 2 Nightshade 12's and 4kw Thoughts?

This is my 2006 Buick Rendezvous.... Pioneer 6800 DVD (not pictured yet) Ive got 4 Re Audio SEx 15's in a custom sealed box. The amp is a Rockford Fosgate T30001BD There is two boxes of dynamat extreme so far. I have a DC POWER 270xp alt. Box was made from 1 Inch MDF I didn't build this, a good friend of mine did in his backyard. ENJOY... Tuffguy40 came by and got a good video of my truck in action.

This is a never ending work log that I should of thrown together months ago, but am too lazy to do. I call it work in progress because I feel as if it can never be finished. Most of it is done with, but there is always something I can do to better my install. This is my second install in my Ford Explorer, the first being a single 12" RE SX ported to 32Hz in a 3 cu. ft. box. It was powered by a RE 12.1 amp. Enough about my old install lets get back to my pride and joy. My new set-up is: (2) Two 12" Fi Q Orion 2500d CarPC 400W inverter for Playstation Lilliput Touchscreen My favorite part about my install is my false floor. I wanted to design a floor, so I could easily get…

Well, its vacation time for me again. That can only mean one thing. I've had most of the equipment for some time now so there is nothing too new. My CDA-9835, freshly repaired and ready to rock. RE 6.5 components, need to redo some aspects of these kicks. View straight back from the passenger kick through the trunk, all passenger seats removed, the only one going back in will be the front passenger. My fully loaded 18'' BTL. Refurbished KX100.2 without its end caps on. New wiring, all Knukonceptz. Still awaiting my excessive amperage alternator, figured I've got most everything I need to get jumping on this.

Been off the forums and out of the car audio word for a while now. Decided I want some more bass in my 2014 escape titanium. It has the factory Sony 10 speaker system but I need more. I originally decided on a xcon 15 and a hifonics brz1200 amp. The next day I go tab place the order and the black and blue sale starts. Now I have a death penalty 15 and ia10.1 amp on the way! I have every thing wired in the car now, 0 Guage from the battery, 0 Guage ground, and a pac ls1 up front. Found a turn on lead from the rear fuse box, and spliced into the Sony amp in the rear as well. When first checking the car to see if it can handle a stereo I found that it has a 150 am…

I was approached a couple of weeks ago by a customer to build a box. He already had the design, only problem was school was getting busy for me, so i had to put him off a couple of weeks. I finally got some free time today to build it. The bedliner is drying as im typing this, and once its dry I'll be painting the port red (seems almost standard on SSA boxes...) and he'll be picking it up tomorrow, so I'll get a couple of pictures of it installed (and hopefully playing if its not raining). Specs: 6.8 cubes net 8.5" Octaport 32 hz All this going in a Dodge Caliber.

LP670-4 in for stereo upgrade, radar detector and tint. More pics to come.

If you want to see pics of the car, they are posted in the Show Off section. Finally got her in =) and absolutley love her, but the stereo must be swapped, of course. This will be a slow build, so be patient with me. Here is the layout so far: Alpine CDA-9887 Image Dynamics CD1Pro Horns Dayton RS-225s Sundown 100.4 15" Sundown Nightshade (a lil beefed up) Sundown SAZ-3000 On to pics... first off does anyone know where I can get these same straps I have holding down the wires... but a lot bigger... say to fit all the wires in one, or able to lay the wires flat across?? I figured one of you guys would know, these are all I found at Lowes and I am not to happy with how to lo…

Here's a vid of me doing the cuts for my girlfriends sealed box for her 10" Dcon. We're doing a ported one next week and seeing which one suits her best. Both boxes built to SSA's optimal specs. Her dad owns a shop with TONS of machinery and this happens to be one.. and he's giving me access to it all whenever I want.. so I'm starting my box-making experiences with the best of the best Enjoy the vid! I'll be posting more pictures/vids of the build later on as things progress. I'm currently in high-school and working 30+ hours a week so I'm limited on time.. but I'm doing as much as I can when I can. ANYWAY . . . Here's the video: http://www.youtube.com/watch?v=1kH5Vrvpd…

Got my dayton plate amp in so I started building the box today. This is the sub setup for my 4.5" BIB's that will be in my dorm. The box will be black, with the black sub and black plate amp, so I have nicknamed it Stealth. Got to start every bo build with this^^^ Actually some of the dimensions are wrong Driver: Mach 5 MAW-10 (Sadly a discontinued driver) Amp: Dayton 240W Plate amp (Will be running 150W @ 8ohms) And The Build.... Dry Fit... First time to use the new Jasper Jig Travis (aka - TMAX98) drawing up the center. Jasper Jig = Perfection Glued, Finish nailed and Clamped More pics to come tonight. I have already put on 2 coats of Shelac and one coat of …

Just finished the box for my BL 12. It's going behind the rear seat, too bad no one will see it!

Until I go to town I am without kerosene for the heater, so I have a minute to start my build log. Eclipse CD8053 MB Quart RAA4200 CDT Eurosport 07 braxials (I need to find out which tweet these have as I really don't recall, I think I remember drt-26 or perhaps that is wishful thinking) MB Quart RAA1000 MACH5 IXL 12 SL SDS CLD Tiles and EBR MLV and Gymnastic Mat (CCF) The vehicle is a '92 Subaru SVX and a project car if there ever was one. I started gathering some of my equipment two years ago when I still had my '93 Saturn SC2, but reality soon hit that the Saturn wasn't really the car I wanted to go all out on with a stereo install, especially with the leaking sunroof…

This is going in a full size Chevy pickup. Nothing big just a little something to listen to. Sub is going in 1 cub sealed and the MLI are going in the front doors. We will be adding tweeters in time. Currently these are the only pieces I have. 1 AA Arsenal 12 and 2 MIL 6.5's. Enjoy the pics.

Blood = better sound, right? (Razor slipped...) ICON 15D2 More pics soon. Build should start in a few days.

Today i decided to pull my box out and do a resand to remove some dings and dents, while it was out i thought ild take a few pics of my system. The head unit it an alpine dont remember the modle but heres a pic Treo 4 by 6's in the front doors Im In the prosess of cuting holes in the back panles for peerless 6.5's Now pics of the box its made of maple and has two peerless 8's in it. Undercoating in the wheel well Powerd by a zappco 750

Hey there guys...I'm new here on the forum and have just finished my first install on my 02' Civic. Haha after reading the Towncar Log, I have to say I'm deathly afraid of posting this log up, but will do so anyways so I could recieve some input from you SSA Gods and other members. Hope you guys like it.

each chamber is 8.1 cubes and 140 si port 37hz ftw! its made for 2 9518g's not sure on amps yet i just know 2000+rms