Amplifiers / Head Units / Processors / Electrical

what do ya'll think? i have a pioneer deh-p3500 and the s/w outputs only put out 2v ......my uncles jvc arsenal h/u puts out 4v ........the same system swapped from my car to his but running on his h/u packs alot more punch and sounds better...........so instead of spending money i dont have on a h/u on the same level as his ive been looking into line drivers cause they arent so pricey ......but i recall several years ago my cuzzin had one and it ended up frying his amp.......so are line drivers a good idea? if so wut brands are good but cheap...and...how many volt output one should i get?

sorry wrong forum will repost under speaker

Has anyone ever had the pleasure of owing one of the big beast? I had a friend that ran 12 12's off of one of these this amp is a horse, wonder why they dont make there new amps with that type of technology .25 ohm stable that would be nice.

What are some of the best brands/prices/websites when it comes to 1/0 gauge cables? I'm needing about 35 ft total of 1/0, what would be my best bet on getting a hold of this?

i already have the epicenter but i want something i can use on newer songs just for that extra punch. can anybody give me any info on the bass cube or reviews?

I'm looking into getting a Pioneer In-Dash DVD. I want the AVH-P4100, but do you guys think it's worth the extra $100 or so than the AVH-p3100? Also, what about the p4100 vs. the p4000?

My pioneer 6100BT has a feature called ASR (advanced sound retriever) and i am assumeing all the newer pionner HU will have this feature also will tell you what ASR actully means and does.When i turn on the ASR feature on my HU, it makes the sound/bass in my car louder but more clear like it is supposed to do. so my question to you guys is, Would ASR act like loud/loudness feature on HU? witch you are supposed to have set to off

Honest opinon would you rather have a old punch amp or a new punch amp I have 3 of the punch 200x2 and a 60x2 and a 40x2 amp that I am planning to une in what i call a old school build in my eclipse take suggestion on what subs to use plan on usin a 200x2 on each sub and the 60 and 40 on highs any suggestions???

I was orignally looking for an external EQ for the zune, for headphones, but I came across this, and thought it was cool. I would be using it in my backpack. Gotta catch this bus. Feedback is appreciated.

Whats the lowest load that anyone has ran a ols school transanna amp at I ran the 200x2 at 2ohm before with no problem i was wondering if anyone has ran one lower than that successfully before.

hey guys its christmax time an my little brother want an better amp for his car so i guess thats will be his gift for me to get but am only willin to spend $200 so i was lookin on ebay to see what i find an this is what i came up with can u please help me chose oneor giev me a better one he have 2 type r 1242d so i need am amp that realy power these sub so more power is better but $200 is my max lol so no sundown Kole kx1-5500d kole trax1-4000 Spl fx1-5500d Spl dk 3400d Spl zlx-3000d Spl grla-3000/1d Power acoustik ps1-5500d Power acoustik stax 4000/1d Power acoustik bamf 4000/1d Audiopipe 1800 Quantum Qca3000d

Soo i was drivin down the street bumpin and all the sudden my subs cut off, when i checked it the amp was not turned on but the fuse wasnt blown, i took the fuse out then put it back in, the amp turned back on immedatley after. next time im driving it does the same thing and i have to take the fuse out and put it back in to turn on the amp. it only cuts out when i turn it up to a little over half volume. i would just go throw on another fuse but they dont sell any 250a fuses at my local places so id have to order online

Right now I'm running 4g cable from battery to my amp. I'm getting ready to do the big 3 with 1/0 cable, but my amp terminals are only 4/0.. is there some sort of adapter that I can use to be able to run the 1/0 into this amp? I need about 4 of these.. 2 for in line fuse (only 4/0 as well), 1 for 12v on amp, and 1 for ground from amp. I'm getting rid of my cap after this upgrade so no need for adapters on it.

I am trying to decide what amps to use ot run my new system that i am building I have been looking at the mmats 3500.1 and the us amps 3500de I am going to run 4 ts-w 3002d2 subs but I have never used either one of these products I have read great reviews on these amps but here in louisiana where i am from there arent anyone around here that runs these amps or sells them so iam going to have to buy direct from these companies so any incite would be great and if anyone else has any other good amp suggestions that are in the 3 to 4,000 watt range please let me know. Thanks

Ive got a 15" SSD with the flatwind coil option. Just wanting to know what amp would be better, and if the audio que puts out more than 870 @ 2ohm

I have a EPx2 Processor with the 28 band eq card and the control of the unit is great i was just wondering if anyone had one with the dsp card in it and if so if the could tell me the benifit of having the card. I love the unit I had saw a dsp card on ebay and was trying to see if i would be getting any more out of having the card in the processor or not.

hey guys ill be running a Jbl 1200.1 watt amp at 1117 watts rms at 2ohm on a fi bl 18in do i need to get a new altenator to power that amp or will i just be fine with a capcitor ill be running this while the car is on. i hope i just can use a capacitor cause my money budget is low

it was sounding to good to be true. didn't know if these amps are ok. wanting to put it on 2 l7 kicker 15. thanks. saw it on on line car stereo.com

So, we did a rewire, and the Pioneer has been sitting for a little while. Went to test speakers and the h/u wouldnt power up, except the amps were turning on, h/u was getting power though. Fuse looked fine.

So, I just but in the new BL, (see sig for more info), and I am very displeased with the amp I'm powering it with, so I think it's time for a new one. Current amp is putting out 600 at 1 ohm, (so it claims, not so sure it is), and I am looking to change that; on a $300ish or less budget I was thinking an audioque 1200d or an SAZ-1000d, (the pre-order for the sundown 1200 will be long over by the time I have the money for a new amp, so it is probably out of my price range). Are there other good choices out there? This is going to be a budget-concious set-up so if there are two solid amps putting out decent power, then I'd go for the cheaper one, unless of course it is o…

by any chance would anyone know what 2 hifonics bxi 2160d strapped do at 2ohms??

i was riding in my car on the highway the other day when my subs went completely off and i smelled something burnt. I stopped and the only thing i found was that the wire connecting sub to the amp came out of the amp and i think it touched the amp it self. The amp went into protection when it went off. my Highs gave me a whistling noise when it went off and would get low in volume. After i connected the wire back and shut the car back on. The subs came back on but doesnt sound as loud. And when i turn the volume up, i hear engine noise in my highs. Can somebody please help me figure out what happened and how to fix it. Thank U!

Alright here's my Dilemma, I have two head units an Alpine IdA-x200 and a Kenwood Excelon kdc-x589. I'm trying to determine which one is better. They both have their pros and cons starting with the Alpine. pros: Ipod support, good looking, ease of use, and usb support. Cons: 2v pre-outs, and for the kenwood Pros: 4 volt preouts, sounds great cd support, 2.5mm jack in. cons: no ipod support. I'm trying to determine which one to keep and give the other one to my father. Also i was told by a local shop owner who competed in world finals said that typically CDs tend to get louder than MP3's is this true? here's some more specs. Alpine: # digital media receiver (no built-in…

yup, another VS thread, and yup this is getting old, I am sorry. Seems the more research I do, the more questions I have. So I want more power than I originally thought. crunch ground pounder 3000 pro, ap3000d, AQX-3500.1?

Would going from ~130w to 300w each amongst 4 infinity 1252w's be worth the strain on my car's electrical system? It would only be a difference of 3, maybe 4 decibels. Would a high output alternator be necessary for 1200w, as well as a deep cycle battery? Or should I stick with the setup I have, and not have to dump around $500 into the electrical system of a car I don't plan on keeping? I could always take my battery, so I might get that if it would make a difference on it's own. My lights dim really bad, but even when I step on the brake or roll up a window w/ out the stereo on. My grounds are good, but perhaps my headlight ground is bad? Sorry, I know this ended…