Amplifiers / Head Units / Processors / Electrical

I was looking around today and found this amp at a local store. My friend has been looking for an amp that could run good power at two ohms mono or a 2 channel that could run 1 ohm stereo and I was wondering if this amp had any guts to it or if anyone could find some specs on it. I figured this might be a good old school amp. If you need some other pictures I can post them too. Thanks Kader

i'm curious as to weather this amp would be safe to run at in a one ohm setup. the seller... of course says it is. but i'm not to sure

Has anyone had any experience with this amp? Im looking for loud and cheap. It says 1800@1 , dont know how accurate it is though. It will be put on an 18" HC once I get it reconed. My Goal is loud, not daily driver just one loud burp machine. Will this amp suffice or should I look into something along the Hifonics line? My Goal is 145 to start with.

hi im going to another comp on the 1st (sunday). ive been running this amp @ 2ohms with my 4 12's. the ams specs are: 1100@4ohm 1800@2ohm 2300@1ohm 3000@ MAX well n e way, i was thinking bout running all 4 12's down to .5ohms. how long do u think i would have b4 the amp went into protection or overheated? i called up PA and they said that they never tested it at .5ohms. thanks.

Found thisamp while browsing ebay and did not know much about power acoustik as a company. Are they any good? Thanks, Matt Cusack

specificly the a3000db, here, and the a520-2hp, here...... what can anyone tell me about them? how are their amps in general? the reason i am asking is becuz a install i am about to start might include these two amps, if they are atleast capable of their rated power and good performers... also, if u can list amps in the same power range, the mono amp needs to be either 1/2 ohm or 2 ohm stable(the subs are dvc 2ohm) for around the same price...plz list....i need them to be a "matching" pair thanks all wheeeeeeeeeeeeeeeeeeeeeeeeeee

well i was just taking the photo's off of my phone tonight and found these that i had in there. if anyone cares here they are BAMF 5500

Had one sitting around i picked up and been using since my kickers in for repairs.... Took her apart and looked around on amp guts. IDENTICAL to the 3000D BUT with the addition of fuses. Appears damn near 100% match. Ile take pics tommorow. For a cheap amp it has a ton of output power.

What do you guys think of this amp? I saw a topic over at SMD and it didn't seem bad at all. I can get it for a REALLY cheap price, like, if it puts out even 3000 watts rms, then it is still worth it. It doesn't look too bad imo. And, compared to the Crunch GP3000D-pro, what do you all think?

Ive heard good and Ive herad bad, tell me what you think...Top one is the one I was looking at the 80001NT

I am getting new power and ground 0g and I was looking at getting kicker just wanted some thoughts on kicker wire and is there any other wire anyone would recommend

So after hooking things up i found that i was short of speaker cable by five feet. I ran down to Mickey Shorr to see what they had. They gave me about 12 feet of 8 gauge power wire for five bucks. so it's a pretty simple question actually, Is there any difference in speaker cable and power wire? can i use power wire as speaker wire? thanks.

What's the deal with them? When will they be available? Got any specs?

I have an 05 Outback. Looking at a bunch of options. Best option seems to be Excessive Amperage who can do a 200A for 385. Anything over 200 supposedly will slip due to horrible belt wrap, and I only have a 5 rib belt. Mechman, Singer, Ohio Gen, and DC power are more cash for less ALT than the EA. So its either EA or possibly this? Stumbled across this. http://powerbastards.com/proddetail.asp?prod=Fitzall-220 Anyone heard or used one? Seems to fit WAY more than just my car. Which worry's me as far as how "drop in" it really is.

hey everyone, i am looking for a alternator for my 02' f150 5.4 v8. atleast 220amp output. i was at my local shop and he told me to check out power bastards alternators. i did and they have nothing but good reviews on them and there very good on price. my question is if anyone here has every used one before.. i really only have $325 to spend (and thats if and only if my alt. from my ranger ever sells..) i will have my AQ3500.1 running at 2 ohms (2600 watts) to a zcon 15 so i really only need around 2200 watts. i will have all 0 gauge wiring and as of now, no extra batteries. if anyone knows of a better deal on a alternator for the same amout of output or better. please lm…

Alright here the deal i just got my custom built box in today. so i go to hook it up after wiring my subs up to my new box to my amp and right when i turn on my car and my cd player i hear no bass or music coming from my door speakers. so i go to the back to check both my 4 channel amp and my sub amp and they both show power like nothing is wrong just no sound.

Alright so I have a 95 Saturn sl2. I as wondering what to do with my power cable because I cannot fit It in between the negative terminal and the actual battery. So instead I have my power connected to my fuse box which..in my mind is putting so much less power and just not as hood as the direct connection to the battery. Is there like an extension to my terminal I can get or what should I do about this.. Sorry for bad Typing..using my phone

i have heard a lot of bad things about capacitors. and i know you may know more about them then i do can you help me out?

I currently am running 2 amps, 1 for comps and 1 for sub. It totals 1300rms. So, I would need about a 130a fuse as a estimate, correct? I'm gonna upgrade the big 3 and get a HO alt. I don't really know jack about amps and all that. My question is, can somebody help me figure out what size alt to get? Would a 200a be sufficient? I drive a 97 Exploder 6cyl and I think the stock alt is 95a. Any help is greatly appreciated

Well I discovered today that my amp power input is loose and the plastic is melted...I attempted to unplug everything and plug it back up and my amp wouldn't come on..Could it still work or am I doing something wrong??

Starting yesterday my sub will play and then stop. I'm running 1 psi 15 inch platform 2 sub wired to 4 ohms on a hifonics zeus 3200 watt amp. The hifonics light on amp will still be illuminated but the light on the bass knob will fade until it's off completely. When I restart the car the sub sometimes will play and other times Not. All wires are secure. Any ideas?

Starting yesterday my sub will play and then stop. I'm running 1 psi 15 inch platform 2 sub wired to 4 ohms on a hifonics zeus 3200 watt amp. The hifonics light on amp will still be illuminated but the light on the bass knob will fade until it's off completely. When I restart the car the sub sometimes will play and other times Not. All wires are secure. Any ideas?

I have a new SSL amp that has power coming from the ground on the amp any help would be appreciated

i need help to figure out how much power my amp will push out at different voltages. The amp i am using is a crescendo bc2000d and it states it will do 2250 at 1 ohm @13.8v. my question is what will be the power output if i were to put it at 14.6v and 16.8v.

So I should be getting my sub in today. I think. I never got trackng lol. Anyway I wont be able to do my Big 3 until friday.....will it be ok running my sub and amp on stock electrical until then? In case you havent seen my other posts I will be running 1 IA Lethal injection 12 on a SAE-1200D @ 2ohm for 600wrms. What do you guys think? I want to hear this sub bump but dont want to risk messing up my amp. Any advice is greatly appreciated. Thanks, Jeremy