Amplifiers / Head Units / Processors / Electrical

im trying to figure out which amp will be better with the proper electrical. 1. MA Audio 5082HX http://ampguts.realmofexcursion.com/MA_5082HX/ 2. Memphis 4kW thanks for your help

So i've been looking at upgrading head units because I am getting some new components and I have an alpine now and use it all the time with my iPod. I currently have a 9881. So I am thinking of sticking with the Alpine line-up and I was going to go with the 9887 for sure, but now I've seen the 9884 and it seems to have a lot of awesome features. Whats the big differences here? My currents needs I guess are: Imprint technology good equalizer( im not sure if parametric or graphic is better for me. But either would be better then 9881's) good iPod control Thats pretty much it I guess... I have a pair of 6.5 Koda components coming in soon and am hoping to make them sound even…

How big of an alt would i need for 2 saz-1500 on 2 yellow tops.

Anyone know anything about them. My buddy wants the CR5000.1.

im picking up 2 12 loaded btl's soon... i just got my atomic 5000.1d now im trying to work every thing out on power.....i need a little help. heres a little story for you lol first i was going to go with 2 13w7 and 2 1000/1v2 amps i bought the amps brand new.so then it was time for me to do the big 3. i bought a 180 amp alt put it in and did every thing i needed to do...when it was time for me to buy the subs...well i found some one on ebay selling 2 brand new 13w7's i was like.... ''damn very thing is going good for me'' i bought them for $816 and i got ripped off (it was a fake listing) it took some time but i got $750 back and i did not get any help throw paypal. i …

My Velleman HPS10 just came in today before I went to work and I want to set my gain tomorrow morning before I leave for SBN in Daytona. Can anyone just give me a quick run through on how to use it? Thanks a lot.

Ok, so i fire up my car to leave my friends and hear a pop then smell burning.... Smoke is billowing from my remote wire and it seems it had gotten loose from my amplifier and touched ground while still inside the remote section of the amp. This is visually the only thing i think could have happened. Amp light turns on amp doesnt work, opened up the case and notice a few burnt fets and some bars... Ile get pics later but if theirs char marks on the board do you think this is still fixable and how costly would the repair be? I have horrible luck and just want to push this whole car off a cliff at some point... BAH!!

what will i need to power these two beasts?

Ok, I'm going to make this short.... Who in their right mind would design an amplifier capable of producing upwards of 1000 watts of output, but supplies the cheesiest little friggin power connectors to run it?! I just spent hours trying to figure out how to connect 4 gauge wire to a set of crappy little power connectors that could only accept 10 gauge at most. I finally ended up using a piece of airplane cable and cable sleeve to "step the wire down" to an appropriate diameter. I was to two different "car audio shops" here in the city and explained my dilemma. All I got was a sorry, can't help you. What do you guys do when faced with this situation?

was thinking about getting one in a little while. I dont want to spend too much, but want something reliable. how long would it take to get familiar with one? any suggestions?

I have been looking around for one of these (either a 200 or 240a) for a while and havnt come up with anything. i really dont want to go through finding someone to rebuild my stock one. any help would be appreciated.

Hi guys, I have an older Orion 8004 (circa 2003) that has a rather odd wiring setup. I'm not sure, but I think the remote turn-on power is the connector on the far left - with the one bank of speaker connectors. Notice the power connectors on the other side. Can someone please confirm this for me? Thanks, Mark

i want to run my orion 2500d to .5ohms. i want to know what it will take to run that low i have two red tops and 160alt. two 15 inch Arsenals. shouldn that work

i have a hifonics bxi1600, and i know no one likes them very much but im hoping you can answer some of my questions. my friend just got a 15" BL daul 2 ohm and after awhile i amp will turn off for about a minute but it is still lit up just very dim. i am runninh 4 gauge wire and i want to know if maybe it is because my amp isnt getting enough power and i should go for 2 gauge wire thanks

I was reading some of the threads here and I noticed a lot of you really don't like Hifonics. I just bought the BXI1206D and ZXI6406. I know exactly why most of you hate them, looking at your set ups (very expensive) i can totally understand why. Noticed a lot of Sundown Audio fans here. All i have to say is that they are beautiful amps, I would love to have one but with 2 kids and the budget i'm on i just couldn't afford it yet. I do hope my Hifonics can serve me well for the time being until i can afford better stuff. Just wondering, what do you all think of Elemental Designs amps (nine.1, nine.4 and nine.5)?

would a 18'' btl tuned to 35 hz sound good. and hit low?

what can a dual 1 ohm 18''btl fully loaded handel. can it handle a 1ohm stable amp ,0.5 ohm stable amp? i know it works with a 2ohm stable im confused . in other words how can i wire my dual 1 ohm subs to run at 1ohm or lower. and is it safe?

My system was finally working right all together. I was on my way to my apartment (3 hr drive), so I had turned the bass really low so it wouldn't knock my radar detector off the glass. I was just driving along and heard a loud bass hit all of a sudden. It was really weird, kuz the bass was pretty much to where I couldn't even hear it and I guess I didn't notice kuz i had turned it down alot. So the bass hit really hard, then stopped. It did this about 2-3 times, just really odd sounds and extremely loud...like not going with the music that was playing and far far louder than I had the bass turned up. Anyway, I got home to check it out. I can turn the subwoofers OFF…

I'll be needing some RCA to run from my HU to my amp. I have some that I got from parts express, but they seem pretty cheaply made.

I have a unit I bought a couple years ago that I'm going to try and do a warranty exchange on. I think I paid a little over $200 for it. I could add another $200 on top of that, so $400 total. What does BB sell that is actually good? High voltage outputs (at least 4v) and ipod connection are extremely important.

what would be the perfect amp to use with an 18'' btl, i do not want to over power it. its a dual 1 ohm

whats up yall. in my system i have us amps 400, esx q404, two ssd12's, a duralast battery upfront and an optima red top in back. for fuse i only have the one in between the two batteries and it is 80a. thats the only one the local car shop had left at the time of install. my question is should i go ahead and order a bigger fuse? does it really matter? and should i have another fuse somewhere in my setup? the esx is internally fused and the us amps has very good internal protection. anybody with thoughts on this?

i have all hyperflex 0 awg, i have a fuse between the alt and battery, at the beginning of and at the end of the run that connects the yellow top to the kinetiks, and from the kinetiks to the amp rack, which also has a anl fused distro. all fuses are 300amp except the 100amp that goes to the clarion amps. will this cause a substantial voltage drop?

I am wondering if a brutus 1600 watt is a good amp, i heard it is over rated. I am soon hoping to order eather a Fi BL or Q dual 2 ohm. I'm just wondering what some people know about it?