Amplifiers / Head Units / Processors / Electrical

I just installed a second yellow optima I have my two amps wired and installed I have two extra sets of ground,power, and remote electrical taped at the end I want to be ready to just plug and play when my two new amps come in the mail I'm seeing 12.6 at stop signs and hit, but do not stay, at 14.4 when getting on the freeway the volt meter is wired to the new battery postitive I'm wondering if maybe I need to charge this new battery some more before i expect 14.4? It was made 05/12 everything is fused with knu including the alternator with high current 300amp fuses big 3 done in 1/0 the alternator is a powerbastards 220 amp, it does 109 @1500 (tested) any ideas? -thanks

http://www.millionbuy.com/pakov22600.html how is that amp? does it make the power it says? I need to run 4 aa 8's at about 300 watts per sub and would like a little more power to have

Would a 3 or 5 channel amp be effective for a front stage and a sub stage. or would it be best to have 2 seperate amps i saw i believe it was a arc audio 3 channel amp the other day with the perfect power amount for my current plan of comps up front and a single ssa dcon 12 in the rear. On a side note i had seen the fi ssd 12s and they look nice but there is quite a price difference and if im not mistaken they require quite a bit more power than the dcon am i mistaken ? I am pretty sure the dcon is my number one choice im just wondering how it measures up against the ssd what are the major differences?

Again am using a US amp MD.3D. I have a HO alternator from Nations and a kenetik HC 2000. Would this be enough to supply this amp with the needed power. Am wanting to run 2 15" subs, 1000 watts a piece. Thanks in advance for the response.

i am planning on buying a kinetik hc1800, and do the big 3 with 0awg, but will it be enough to power a RF T1500-1BD and a power acoustiks 1000 watt max 4-channel, i know it wont be full tilt, but just wanna know if it would power it welll, if not, what else can i do, swap it for a kinetik hc2000???? open for sugestions, and really cant afford a HO alternator, i have a silverado 2000 4.3 single cab,

http://www.sonicelectronix.com/item_34494_Boss-CE2200M.html I've heard many stories of Boss Audio not putting out the specs they say, but i have a nice build coming up in my uncles ride, my friend had a 1800watt boss 2 channel amp and it sounded pretty good, probably wasnt the watts the specs said though. but anyways, my plan 4 12s. sealed enclosure, subs facing up. they are 200rms each 400 peak. the amp puts out 750rms at 4 ohms. i know it most likely wont, but whats your estimate on the wattage it can put out at 4 ohms? money is tight and im not lookin to spend a whole lot on this, this is a fun cheap project, (the real project will be in my van) this build should…

Ok so i noticed yesterday that my radio would cut out at high volume so i went to the truck looked at the wires and erething seemed coo, I hop back in and it wrlks so i start driving and it does it again... So i justy turn it off and say i'll deal wt it later, so today i get the test light out and go under the hood, and DAAAMMM, my fuse holder was melted and it had started to melt into my finder well.. But the fuse never blew, and basiccly it was only on the side before the fuse. IT was molting i mean the gold was melted off it looked bad i would take pics but its uggly.. Why did this happen? I've seen it happen on amplifiers wt plastic coatings around the batt terminal,…

Well im having a hard time making a decision on what to purchase i could use some help im looking to spend around 500 and will either be powering a revo or axis not quite sure yet all opinions appreciated so far ive looked at a few amps a t2000, powerbass 3000, xxv thor, xxv collosus, and the new ia 20.1

Alright, so sold off everything from old substage, well actually sold half of it, other half got stolen. Anyway will be running 2 1500d's on 3 SA-12's, and backing them on the electrical side will be a kinetik hc2000, hc1400, and optima blue top under the hood. right now alty is a small upgraded 120a. I am saving up for a real nice 200 a 240 peak custom valeo from ohio generator. Now the real question is this. I want to charge batteries to 15volts. right now with the optima, and two kinetiks that is a total of 4500 battery amps and 162 ah from kinetiks and I believe 55 ah on the optima blue top so 217ah total. I do plan on adding another hc2000 and hc1400 on oth…

Had to disconnect my radio for trouble shooting and when I hooked it back up with yellow to yellow red to red it dosnt wont to power on unless it's hard wired yellow to red.. I have a extra orange (illumination) wire left can't remember if it was hooked up or not please help so I don't have to take my deck out everytime

Okay, so I just hooked up all of my system last night. It worked flawlessly all last night, and this morning. So today, after work, I got in my car, turned on my radio, and my amp and everything turned on and my sub was playing, but I now have no music. At all. I know this is probably a n00b thread, but please help! I'm dying without my sub lol

Ok, I'm trying to do the big 3 on my buddy's full-size 1992 Bronco 5.8L Windsor, but I am absolutely stumped. The alternator doesn't have a post and plug like I'm used to. It only has two identical plugs. Any thoughts on how I can do the big 3? Where the (+) would go?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5767552031&rd=1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5767516713&rd=1 Ok discuss.

Oh my, what is the world coming to... http://www.edesignaudio.com/wire_cat.php?catid=48

I know what amp this is. IF you guys don't know i'll let you know later but i have NEVER seen an amp look so .... well confusingly different. I dont know if i should be scared, shocked, surprised or disappointed.

I was wondering if anybody used these X2 Power Batteries, supposedly they are rebranded North Stars made for Batteries Plus. Looking at electrical upgrades and an underhood battery is my first step, I can grab these batteries locally plus they come with a great warranty. Looking for any input, thanks fellas.

just read up on the PG site and the Xenons are discontinued, and so goes the XeLoad with the flexiable 1-4ohm stability with similar output, suprised they are going this way, seems as if the Xenon was the step between the Titanium and the Tantrum, and now they are dropping it, so the new Rsd line is taking the place of the Xenon and none are ratted to be 1 ohm stable, what is going on, PG has always been a company with a top end line to aspire to have, now I am not so sure and this goes for the subs and components too, are they down grading to stay afloat and jumping on the F&F bandwagon?

So I've been looking online for answers to my dull sense of fully understanding these questions. I have an alpine cde149bt, that I am just not fully comprehending. I have read up and down and searched forums to some avail, but not fully. Im hoping you gurus can help to clarify some things. Now, I have xover settings, with f/r hpf, lpf, frequency and slope. Now I understand these all fairly well, but on this, where I have gotten confused is: does the front hpf control highs, and rear hpf control mids? Or is it as it sounds, front does front, rear does rears? Next is, by setting frequency, slope and levels on xover, how much of an affect does it cause within bands of parame…

Hi, I just received a new sundown sae-1200dv2..Hooked it up, runs fine however the crossover is not working properly. My current setup consists of the stock head unit ('06 tahoe) with a Scosche LOC-80 line out converter with the gains set around 85%. I was running a directed 1200/5 before and the setup worked fine. However now using the sae when I turn the LPF all the way down I still hear vocals coming out of my subs. I was told this is because my old amp used a 24dB slope, and the sundown amp uses 12dB. I have no idea where to go from here. Any suggestions please?

I hardly ever see people using a few of the the xs d7500s in systems around 7k I always see people using a bunch of smaller batteries but would it be ok to use two of the 7500s and the biggest I can fit up front for a ct sounds 7000.1

So im finally ordering my dream system for my 2003 Dodge Dakota Crew Cab, Its gonna consist of 2 15" d1 SSA Icons in a box approx 8cubic feet tuned around 28hz (will be getting someone on the forum to design it. a Crescendo BC2000D, and a Kicker KX600.4 for my Hertz Hsk components, I know I need some upgraded electrical, so far Big 3 Is done in 0 guage. My truck can fit a group 27 battery but not 31 will the D2700 be adequate? alternator is stock 136 amp. Might end up getting Singer 250a but budget isnt quite ready to fork out that kinda cash. Basically I will be running around 2000 rms after rise and having speakers at 4 ohm. Is this way underkill or will it maybe be en…

If you have one post up your opinion please.

While sitting here thinking about how i keep reading about capacitor or battery topic.. this popped in my head. So, i am curious... With the new XS VCM, will this not only replace MLA but also capacitor use period? For those that don't know what an XS VCM is, let me briefly describe it. It is an add-on device for stock or aftermarket alternators that has an attached module that sits in your car. This module is set to any voltage in 0.1v increments up to 19.5v if your setup supports such voltage. When the VCM is used, whatever voltage is set, this voltage will NOT fluctuate...not fluctuate...not...ever(with slight exception below) In testing, it is shown that, for example,…

Hey guys, i was looking into batteries for the near future because my stock one just isnt really doing it for me right now. The well known XS brand stuck out to me, and i saw that their batteries have beastly current output, but i was also looking at Optima batteries, and i wasn't sure which is the better of the two. XS has more output for current, but Optima has a "gel layered top", whatever the hell that means. I'm leaning toward XS but if anyone can explain to me the pros and cons of each battery, and whatever the heck gel layered top means, it would greatly be appreciated!