Amplifiers / Head Units / Processors / Electrical

I sold my amp (thanks, ulrisa) so I'm in the market for a new one to power my 10" Dcon. For my budget I've narrowed it down to these two: http://www.sonicelectronix.com/compare_items.php?sort_order=%2Fviewcat.php%3Ff_72%3D14%26manufacturer_id%3D63%26category_id%3D26%26sort_order%3Dbest_match&product_id%5B%5D=23185&product_id%5B%5D=23872&button=Compare Does anyone here have any experience with Soundstream amps? I don't have any experience with their products, except for the SPL 12's about 10 years ago (they belonged to a friend). I obviously don't know much about the technical stuff, so is the $70+ dollar difference between these two worth it (other than the…

Anyone have any experience with this head unit? Looks nice and the features seem pretty good for a double din. Can be had for under 350 new and about 250 used. So has anyone tried this one out, or has anyone had problems with it? Would like to step up to a dvd head unit and this seems like a decent deal. Don't really want to spend too much (around 300 max) so that I can save up for some xcons. Also I could give a crap about ipods. I use either my zune or the pioneer cd-ub100 with a portable hard drive for music (which this deck has the plug in for it)

I'm looking at upgrading the system in my G35...I've gotten almost everything figured out except the LOC. The stock HU puts out differential balanced signals and I need to convert them for my amp (planning on buying the Boss REV-665). I'm on a budget so I can't replace my HU (plus, the trim conversion kit costs over $300). I need it for 3 channels (fronts and a sub).. so a 4 channel one would work. I've heard the David Navone ones are good (NE-774V) but am concerned with things like this. Are they the best ones compared to just any LOC or should I look at something else? Ideally, I'd like to get the Audiocontrol LC6i/7 but that's out of my budget. Thanks.

ive got a Diablo Audio Hellfire 8000.1 it has a blown power supply. where can i get it repaired? Db-r does not do them, already checked. i know of amp medics, any others? and what happened to them? their website is gone, and i cant find them anywhere.

I just finished my box for 4 8" sundowns. Its a big center console box for my single cab ranger. Its 2.4 cu. ft (after displacement) and is ported @ 34hz. I'll post pics up soon. BUt im gonna order the subs this week and am im looking for an amp to push them. What should i get as far as a amp/s?

I am going to actually use a dimm for once....easy enough looks like.....but the mini has a few more controls than most amps I have run.... any pointers on what to set the amp at? test tone recomendation or is 50 good enough?

I was going through some boxes of my old belongings and stumbled upon my old school Autotek stash. A 7050 BTS, 7100 BTS and a 7003X electronic crossover. I do not have any other information on these gems (I do know they were made by Zed Audio), and there is very little on the internet about these. I contacted MaxxSonics and was emailed a owner's manual, however it was missing a few pages. I'd appreciate any information anyone has to share about these. Other then having to purchase some new Molex connectors for the speaker wires, I'm looking to put these back in service. Now if I could only find a box with a stash of 9050's or 9100's....

I cant do both. I have one Iraggi HO alt rated 160-200A @ idle, 220A peak should I add 1 more bigger alt to the AC bracket or add 2 more 100aH Oreilley AGMs, Intimidator knock offs

whats up, has anyone heard of Mechman alternators? if so what have you guys heard about them? http://mechman.com/store/product_info.php/cPath/8_717_1048_1912_1950_1953/products_id/273 ^^^^^ Theres the liink to the site.

Any of ya'll ever work with one? I love the one I have on my Q, seems to be putting more then 500watts rms to the sub. http://i205.photobucket.com/albums/bb61/gsaler123456/IDQ12%20And%20QX500D/DSCN0902.jpg That's what it looks like Dual 40 amp fuses, 4 Gauge power..

I'm curious as to what difference I should except to see switching amps. Currently I have some shitty old soundstream amp, MAYBE giving my SSD 18" 300w. I'm not even sure on that. I'm going to be switching it out for a SAE-1000d. What kind of output difference should I be expecting ? I'm sure overall sound quality will be better, as my current amp is garbage.... But will there be more SPL ? That's what I'm curious about.

so i am wanting to buy a new amp for my Focal KRX2's ...they are 2 ohm... i will post specs below for the speakers... right now i have them ran off a candence TRX 3004 bridged.. they seem to like power.. i bought the Boss audio zed built amp and was going to try it.. but after getting it and seeing how they want the power wire to hook thru the little spade connectrion it kind of turned me off .. going to be hard to find a way to hook my real 4 gauge power wire to it... so anyway.. now i am going to buy another amp... i want something that sounds good.. i was thinking of the Zed audio Kronos.. wanting to spend around $400.00 .. so would this be a good choice ?…

Ok so Im kinda stepping up a little bit on the whole sub scene and I kinda got over my head a little bit. I thought I would look to you guys for some guidance. I have bought 2 15" Orion HCCA's. I bought the dual 4 ohm version thinking Id just run 1 big amp. Well my noobness has bit me in the ass. I need a large amp as wasnt really thinking of the amp draw that this would present. So if I can get any suggestions on amp/batteries/alt that I may need I would owe a favor for sure. I know you guys get these questions all the time and I didnt want to be "this" guy but I really have no other choice. I want to learn this instead of just paying some shop to do it for me. …

What size speaker wire shoudl i use for BTL 18s?? thanksss

So.. I don't use any of this new bullshit, i keep it old school with audiocontrol stuff that does not mess up. Resistor packs and things to sifts slopes and crossover points.. What is a good deck now that actually has the capability of a H-701 processor or the likes there of? I'm drawing a blank... Any suggestions would be great! Thanks! -Nick

i am lookin for a new hu that will allow me to play music and videos from my iphone and charge it at the same time.. i would like to stay below the $350. it can fit a 2din in my truck but would rather it be a single din.. ur help will be greatly appreciated

I have two FI Q 15 inch subs that are each a dual 1 ohm coil. I had them running on two Rockford T10001bd amps and then switched to a Sundown Audio SAZ-3500D amp. It seems now that for some reason I may have lost some sound quality when going from the rockford amp to the sundown amp. It just seems like the subs may not be hitting all notes or sounding as good as before which is when I ran them on rockford amps. Does anyone know if this is possible or even who makes a better amp whether if its Rockford or Sundown Audio? These subs are fully loaded with each being in its own 2.5 cubit foot sealed box. I guess I am just looking for the best amp here which could match th…

whats up. i just bought a 95' taurus. im running two btls in the back seat walled off, powered by two saz2500s, and also a four chanell. i was just wondering how many feet of power and ground wiring i would need to power everthing. thanks

Im debating whether I should buy a Leviathan or a 100.4 I currently have Bravox CS60CF, and will have 8" midbass in the door in the future. At first I was going to use a 100.4 for the mids/highs (Bravox CS60CF) and the 125.2 for the midbass. But then I found out about the leviathan which does 150rms and has 6 channels. I could use 4 of them for the Bravox, and the other 2 channels share them for the 2 midbass drivers (but then it would be 75rms per midbass driver). Disadvantages are single vs double amps (space) and extra power/ground runs of wire. And using only 2 channels for the Bravox wouldnt work because that would mean back to passive I cant seem to find advantages …

Hey guys! Hopefully someone can help me with this. I'm going to redo my whole sound system and I was going to get a h/o alternator but my stock alternator went out so i had to buy another stock one. So my question is will I be able to add a h/o alternator to my truck with the stock one that I currently have? and if so what do I need to make it work. Please help!!

got a kenwood kac 9013d amp here that went into protection one day in my brother's car. it was temporarily mounted to the sub box at the time and powering a kicker l7 15 (which is now dead due to cracked magnet and shifted motor)in a ~4 cube ported box. so what happens is every time it is powered on it will go into protection. i looked the board over and i dont see anything burnt. however i did find a capacitor with one of it's leads broken off. here is what info i can get from the capacitor: 50v 47uF (microfarad), appears to under a brand ELNA, CE85(degree symbol)C which i assume means ceramic and 85C is max temp rating, right under that last line it reads 0718 which …

I have a JBL BP1200.1 and a JL 300/4 I recently disconnected/reconnected my battery and now both amps are refusing to power on. I checked with a multi meter that they ARE getting power but not even the lights are coming on. The JBL has 3 external fuses, all in tact, and the JL does not have any external fuses. What's the next step? Do I have to open these things up to inspect any internal fuses that may exist?

Recently i had to return a kenwood KDC-BT945U because it kept getting really hot and messing with the sound quality so im looking for something else. Im looking for something that has at least three sets of preouts (front, rear, and sub), aux input, decent ipod/iphone controls, and a good equilizer. Bluetooth would be cool but i can make calls on my phone so i really need something that will play music loud and for long periods of time. The guy at best buy showed me a JVC KW-XR810 but for some reason im a little hesitant with that brand. Id like to keep the budget under $300, but i understand you get what you pay for so going over wont hurt me too bad. I allready got a d…

So I'm planning on running one run of zero gauge from the batt to a distro block (Like the Kicker PDK1 if anyone feels like looking) so that I don't have to drill two holes in my firewall. But the SAX1200D just shot up from 315 to 375, (just outta my price range) so I'm gonna get a refurbished SAZ1500D from DB-r. My question is, since the distro block is going to be 0ga in and 4ga out, can I run two runs of 4 ga to the 1500D (as my other amp will be an SAX125.2) and feed the it the current it needs? Or will it not be enough and possibly overload my one run of 0ga? (it'd be a decent 0ga wire too, btw. Like Stinger or maybe Kicker)

Should fit over the terminals also? Or what size should I be purchasing? Thanks.