Amplifiers / Head Units / Processors / Electrical

i dont get it. i was doin an install on my friends car and the speakers werent working. I decided to take my eD9.2 out of the car and and switch the pg out to see if i hooked everything up correctly. Everything was fine. Now here is the problem. Once i put everything back in to my car and hooked everything up, i found out that both my amps wouldnt turn on. i checked the fuses, all fine, all the connections, fine also. the HU works.... but it seems that my amps wont turn on. What the heck happened?

I recently purchased the saz 1500D and last night as i was driving, my sub stopped playing and i heard a loud thud type sound right before it quit working. I checked the amp and the fuse were all blown. I replaced them with more and turned it back on. it took a second but my lights started to dim in my car then the fuses popped still. Everything being powered by the same power line is fine there is nothing wrong with anything else. What do you think the problem is. I believe its a factory problem

I am getting some money built up to get some SSD's and I want to push them just right. Since I have no experience with Fi Car Audio, I was wondering what would be the best choice of an amp for these subs. Money is almost not an issue with me. But not a rediculously priced amp. Thanks in Advance ~MadroX

Okay guys.... Your assistance is needed once again... I had my equipment installed by a buddy and since I had planned at the time to run my Kenwood amp at 1 ohm with a 15" Kicker L7 my buddy dropped in a RF 1 farad capacitor while we hooked this all up... I already know this negatives here and so I would like to remove this while I do my amplifier swap hopefullly this weekend.... Here is the big $100k question: How do I discharge the capacitor? I will disconnect the power from the battery and then remove the capacitor fully as I understand it... But I don't want this light bomb sitting in my apartment with energy being stored... only found this link .... Should I ju…

I was wondering, are Audioque amps comparable to Sundown amps?

Well, the price was just too good. I went along and got the Visonik and love how it looks. Old school red colour to it, and its pretty damn big. Looks like my next step will to be getting those Icons. Might take a few guts pictures when I get home after work today, wasnt enough time in the morning for it.

ive had a saz3000 since summer 08, and this next summer im lookin do double the power in my car, i need help deciding on an amp though. I heard about sundown and stetsom at the same time last summer when i asked around in a different place, and decided on sundown. now i need even more power, at 2 ohms. my choices so far are either to get another saz3000 and strap 2 together, or get a stetsom 6k2d. only problem with stetsom now is they only have the 6k2d in brazil right now. the US supplier said they might have some after april though. any advice on which to get.

I'm looking at this dual headunit and I was wondering if it is a good choice, its only 17RMS but I dont really care I just want to make sure it won't blow up I plan to get a amp for my speakers soon so 17RMS is fine right now. I already have a after market head unit in my car will I need the wire and harness still??? this is what I'm looking at: http://cgi.ebay.com/DUAL-XDM7610-CD-MP3-AM...1QQcmdZViewItem

I'm going to install two amps one is mono and the other is a 4 channel for my mids and highs. I already have the power, ground, and rem wire, but the only thing is how can i get two rca's if my headunit only has one connection?

hey all, im having a hard time finding used/refurb sax 100.4 (about 350$). i was wondering if anyone could recommend an amp that will put out similar performance for about the same price. my speakers are cdt classic series which handle about 100 rms each. thx-phil

i need to wire my sub at 2 ohms. the blue line on the right that goes from 1 of the positive's, to 1 of the negative's, is that 1 piece of speaker wire or is it both that i twist together and put in the terminal? like speaker wire has a positive and negative, do i separate it and only use one side, or do i twist together and just use both? hopefully my questions makes sense. thanks guys.

Has anybody checked this amp out yet http://www.audioque.com/aq/AQ3500D.htm I know the 2200 AQ is good and does rated power, should I expect any less from the AQ 3500 ?? Thanks

Right now I'm looking for an amp to run a single 12" under rear seat of truck. Sub is a rockford fosgate p3, Thought I would poke around on here before asking questions ...

Gonna power a BTL N2. Opinions? Powered by a 200 amp alt and just 1 battery.

hi, i am wondering is doing the big 3 in 4 guage enough for a 2400 rms system? i know using a thicker wire is better but i would like to use stock type connects and the biggest side terninal battery wire is 4 guage that i can find unless i can find like 2 guage then i might be stuck using 4 guage.

in your opinion whick is a better batt for every day use. i have been thinking about 3 SHURiKEN 140ah batts, but how do they compare to XS Power D3100's? i want something powerfull as hell and very durable for longevity. i know how they look on paper, but how do they perform in the real world

Just threw in some more but not done yet!

i was @ Harbor Freight and saw an analog Volt meter that bosted different color LED's for $19.99 so i got a lil help from Alan Hall and well minus 1 smaller cup holder later... 3/4" Mdf wrapped in Blk Vinyl heres the installed pic off on with motor off on with motor running different colors not bad for a cheep fixx, waiting for Stinger to replace my digital volt meter. http://www.harborfreight.com/cpi/ctaf/disp...temnumber=98479

is there going to be any auidible difference between the two amps? and how much more power is the t1500 gunna suck out of my system? will be used for a 15" XCON

what type of fuse should i use for the amp to battery power wire (in an inline fuse holder from knuknoceptz). if this helps...the wire is 1/0 gauge, the amp is an saz 1500d, sub is going to be a bl15.

I will be running a 4-channel amp to run my mids/highs, so I'm looking into a 4-channel RCA set. I've heard people say that it really doesn't matter how good the quality of the cable is, and I've heard the opposite. How do you think these would perform? I have Amazon Prime, so $12.41 with 2-day shipping sounds pretty sweet. Are they worth it, or should I go with something else?

Well im planning to buy either 1awg or 2 awg power wire from wire and supply to power my ppi black ice 1300.1d. I have all stock electrical.. but i need a fuse inbetween my battery and amp. What sizedo i get? The amp has 4 35amp fuses... does that mean get a 130 or so fuse? And should i get the anl fuse or the round one?... and is that wire the right size? Or should i be going with 4awg? Or like 1/0...

Anyway all i have right now is a Soundstream XTA600.2 600 Watts RMS and my Oz Audio Matrix Elite 15 and its dimming even with that. I have been looking around and i cant find that many alternators for my car i had been recommended to call ohiogen to ask? my lights have been dimming when idling especially when the air is on at the same time, i have a 1995 dodge stealth and they alternators are weak on them and i believe i even have the upgraded 140 amp ......it could be the 110 amp thought im not sure, but i was told that i couldn't go past a 140 amp that it probably cant be wound more than that.... I saw this by powerbastards http://powerbastards.com/proddetail.asp?pro…

Hey guys, just wondering if anyone hear has any experience with critical mass amps. I know they are crazy money but that isnt my concern. I just want to know if they can throw out decent power. I had picked up the v2 series pretty cheap and have not used them yet. I didnt want them, but my buddy needed money for his house. Any input good or bad would be nice. I have put a side the money for a sundown 1500d for the summer, but in the mean time i was thinking of swaping my pdx 1000-1 for the critical mass v2 sub amp. Should I do it? (the v2 are the smaller black ones)

I figured this should be stickied because this will REALLY help all of us get our cabling cheaper. I'll start from the largest to the smallest- This information is valid as of 4-14-2012. 4/0 - http://www.wireandsu...0-fslash-01.htm $2.98/ft - Pure COPPER 397A @15ft @5% Voltage drop 390A @3ft @1% Voltage drop 3/0 - Too $$$ for other options available 2/0 - http://www.wireandsu...0-fslash-01.htm $2.55/ft - Pure COPPER 250A @15ft @5% Voltage drop 249A @3ft @1% Voltage drop 1/0 - http://www.wireandsu...0-fslash-01.htm $2.10/ft - Pure COPPER 198A @15ft @5% Voltage drop 198A @3ft @1% Voltage drop 1 AWG - http://www.wireandsu..._p/sgx-1g01.htm $1.65/ft - Pure COPPER 157A @15ft @…