Home Audio

I am trying to help a member here on SSA with his home theater sub project. He is currently using a Fi 12" SSD in 1 cube sealed with polyfill running off of a 1400w Behringer amp. He is changing his setup to a Mach5 18" running off the same amp but ported tuned to around 18hz. His amp only has a 30hz or 50hz roll off choice. I have searched and searched for crossovers that have a subsonic filter on them that can be tuned to roll off around 15-20hz. I'm trying to find one for under $150, $80-$120 is more ideal. I have came across Harrison Labs 20hz FMOD adapters. This is currently the only thing i have found. Is it ok or worth using? IT's just for movies and the occasi…

The tempurature outside is going to be perfect for grilling in the next month or so and I decided I was tired of having to turn up the indoor setup so loud the people inside the house had to shout over it so I could listen to music. So I bought a pair of Dayton indoor/outdoor speakers today and a ton of wire (500ft). I had intentions of using the "B" channel of the "A/B" selector on my HT receiver as a channel to run the outside speakers. I found lots of information, but very little specifics on the subject. My questions. 1) Can I use the "B" speaker selector on the Yamaha RXV2400 to power these in addition to its regular duties? 2) Volume control, is it as simple as pu…

im looking for somthing powerful, with nice options. i have a bucha yamaha speakers already.. i was gonna try and use these, and build a sub system later with yall's help. thanks

School is starting and I am looking to add a Sub to my BIB's. For amp duty I'm probably going with a Dayton plate amp (180 @ 8ohm and 240 @ 4ohm) Sub duty is another question... I have 2 options for the sub box. Option 1 - Small sealed under the corner table. I would guesstimate ~1.5 cubes net Option 2 - Shallow wide ported enclosure. Can pull out the couch little bit and create quite a bit of space behind it because of the way the wall and couch is designed. Don't have any good measurements but I think 4 cubes would not be a problem, and box can be as wide as a couch. I'm really leaning toward option 1 at the moment. I don't watch many movies so commanding low low end i…

I know this is probably not under "Home Audio", but I'm taking my chances. Looking at TV's, I need an outside opinion. I can get a Samsung 61 inch or so, 1080p DLP TV for around $1500. What's the catch. I googled around for the Pro's and Con's of DLP TV's, but nothing gave me anything to hold on to. For instance one "Con" I saw was, "TV not small enough to hang on wall". <-- That means nothing to me. Anyways. I know nothing is too good to be true. I need some input. Thanks

Ok I want to get a little 2 way HT and something to listen to music with. I really like the woodies on parts express since they are cheap and I wouldent have to build a crossover. Im just trying to put something together that is cheap I was thinking this receiver pioneer vsx-518-k I figure that way if I ever want to go 5.1 I could. Now my question is would this receiver work is it enough power to run these? What would the drivers wire down to, what load would the receiver see? Here are the woodies

I am looking for a pair of speaker stands for my KEF bookshelf's. I've looked at Parts Express and some mainstream places like Best Buy and I don't like the looks of any stands that I have seen. Preferences: Height - 24"-30". Black. Metal. Anyone have any place to direct me?

I am interested in just a small 2.1 bookshelf system for my living room. I don't really want a whole 5.1 setup and no one else seems to care about it. The major reason for the 2.1 is mostly for movies/TV/sports/games....maybe 5% music. When I looked around, I liked the new Harmon Kardon HK3490 or whatever that does 120x2@8 ohms. I am going to pair these bookshelves with a 18" Mach Audio with a 500w plate amp. So I want something that would cross with it well. I have been leaning toward the Klipsch Reference RB-81 or something similar although the RB-61s are more in my price range. My budget is around $5-600 for the speakers. I already have stands, which are kind of tall s…

well ive been looking at these for quite a while i wanna do these with my current kenwood vr-60-rs receiver along with 2 18Q's ...........will these monitors be good and also..looking for a good house power amp to drive the Q's(sorry bout the posts about a car amp..ive had an epiphany)..lol..model are monitor 70 floorstanders and monitor cs2....heres a link...oh i almost forgot..this soundcard nice??http://www.amazon.com/exec/obidos/tg/detail/-/B000J1F1BI/ref=ord_cart_shr?%5Fencoding=UTF8&m=A2R0FX412W1BDT&v=glanc e .........a pair of these http://www.amazon.com/exec/obidos/tg/detai...ER&v=glance .....…

I currently have a SONY STR-DG820 A/V receiver (got it for free) and the subwoofer output is a single RCA. Is it not possible to use a Crown XTi 1000? (I have never seen connectors like the back of the Crown before) I originally was going to power a Fi Q18 with a Dayton HPSA1000-R 1000W Rackmount Subwoofer Amplifier. But then as far as the reviews go that amp is highly overrated. I don't have a serious problem with that but I would like to get a quality subwoofer amplifier because I don't plan on having the SONY receiver forever. Thanks.

i have never made a HT box so im not sure if i should go sealed or ported. what do you guys think will be best it will be used 95% for movies

Anybody know if there are FI IB18's ready to ship?

I cant remember this site that allows you o build your own box. I remember the second part of it was like Designs. Can anyone help me out _______Designs.com

I have someone who called my store today (we do car audio). And he asked if we did stereo's in offices. Well we don't but i do setup home stereos. So i figure how hard can it be. Well apparently alot more so than i thought. He is coming by later today with a floor plan and the exact stuff he wants. He wants to have volume controls in 7 different rooms. Its a chiropractic office. So he wants to be able to adjust the volume independantly. He didn't mention PA functions but i'm sure he'd like to have it. So basically what i'm asking is what do you think would be good hardware for this application. I was doing some research and found these Bogen in ceiling. http://…

made a thread a while back on this, i never got around to taking pics after i hung the tv. i gotta get back up the attic and shim up the left side of the tv, becuase the trusses arent perfectly level in the attic. either way, its really the only way i could have mounted it, and its a nice viewing position from my bed. had i used a normal wall mount and put it on the wall, it wouldnt be angled towards my bed any. anyways, heres the pics. the tv speakers are removable, and will be removed, once i get a 2.1 setup to replace it with. had to put it on SSA before the pic haha this is laying in my bed questions- should i buy a simple 2.1 setup, or should i make a DIY setup fro…

what is everyone using? i would like to find something that is cheap but still could handle more than just a big screen. my entertainment area includes my 42" TV, yamaha rx-v630 receiver, a little phillips dvd player (nothing special) and a karaoke dvd player (also nothing special, imported from Vietnam), behringer ep1500 pro amp, and cable box. i looked at the Belkin PureAV Home Theater Battery Backup with AVR Technology but to a lot of people using about the same set-up, it would overload easy. the price is good but i was thinking of going with a bunch of smaller pc surge+battery UPS battery backup units. i have a belkin 550 VA UPS and an APC ES 350 VA UPS for my compu…

I am looking to get one of these projectors in the next week... getting the basement dry walled in the next few days here So far I am lookin at these 4. Mitsubishi HL5000BL $2300 http://www.projectorcentral.com/Mitsubishi-HC5000BL.htm Optoma HD80 $2700 http://projectorpeople.com/projectors/projspec.asp?itemid=22991&itmname=Optoma%20HD80 Sony VPL-VW40 $3000 http://www.sonystyle.com/webapp/wcs/stores...552921665307855 and the Optoma HD65 $1000 that comes with a screen http://www.costco.com/Browse/Product.aspx?...314&topnav= any help would be great

I am looking for a 2 channel amp in the no more than $300 range. I dont know where to turn. I originally was going to get an A/V receiver, but I dont need the video part of the receiver. The back of the TV will do just fine. Better quality anyways, and I don't need the radio. Anyways. I am going to be powering 2 KEF Q's coaxial 15-100 watt speakers at 6 ohms. And are pre-amps basically to be the equalizer? And also. If I get an amp, do I need a pre-amp? And if I need one, where should I start looking?

At my house, I have these Kenwood floor standing speakers. It has 3 different looking tweaters, and 12"woofer. Then I look in my KEF rear speakers, and it has 1 speaker which has a tweater in the middle of a little 6" woofer. Obviously, the Kenwoods sound a lot better. BUt I am confused. I want to build my own, but why are there 3 different looking tweaters? I know that the frequencies are seperated by a crossover to the different tweaters, but when I search around for tweaters, I dont see tweaters being seperated by the frequency it plays. Help?

I have been reading, but still don't understand. Is there a difference between home subwoofers and car subwoofers? Would i have a problem hooking up a Fi Q to a plate amp? And the speakers. Is it not possible to hook up lets say some JL ZR650-CSi speakers to a receiver. Would this not work?

just bought this projector at the advice of the great Johnecon2001. attempting to install it now. Also picked up a Onkyo 7.1 with HDMI switching. I'll post up picks later today when it's working.

i want to drive two sundown sd1-v1 at 4 ohms. i was looking at the Megabass ll

A little over a year ago a older good audio friend picked up some B&C 12CXB's off eBay. He kept emailing me saying that he really liked these coaxials, and that I'd better jump on a pair before they were gone. I kinda held out for awhile, because folks tend to change their point of view over a period of time with audio gear. He never did, and kept razzing me to get a pair. He finally worked a deal with the seller for a I can't pass it up kind of deal..... We both have listened to the B&C 12CXT, and liked that coaxial, but both prefer the bit more lively sound of the compression tweeter used with the 12CXB. Older ears I suppose. I mounted and experimented with port…

Ok so I'm looking for a receiver to power the ZDT 3.5s. it has to be 4ohm stable and I'd like a remote and prefer 80W/channel at least.