Home Audio

Hey everybody. I went on Madisound and found some Aura 16ohm 3" full range speakers for $1. I've never done an array before but thought this would be a great opportunity to try it out. I've got two different arrays going for a surround sound. The amp Im using to power the new speakers is out of a Logitech X-530. I pulled the speaker boxes apart and took out the speakers to also use with the Aura speakers. The original speakers out of the Logitech system are 8ohm each and are wired in parallel giving a final ohm load of 4ohm. I don't know what the amp puts out in rms or anything but I've hooked up a JL 12" sub to the sub channel and it makes quite a good amount of bass on …

hey guys... just to let you know i recently took a leap to build an EBS, an 8.8 ft3 sub!, using the mj18 and a rythmik amp plate and it is awesome! i am still playing with it and making a few adjustments to make it sound tighter. the box is large as you can imagine, 42 x 17.5 x 27.25 external dimensions with a port slot of 2.25 x 16 x 29, tuning at 18hz. it sits behind my couch down firing, with my computer table on top. so far, it sounds great but i need to make more adjustment with adding and subtracting fiberglass. placement of my room has been a challenge since my room is so big with 20' ceiling, with a lead to a kitchen. it's a z shape room with no wall for bass…

Hi guys Im looking to get a reasonable priced turntable for my home theatre that has good sound quality?? I was wondering if there is a difference between the turntables that were released back in the day and the ones that are used by dj's today??

I'm stoked, finally getting an Adcom GFA-555 II for my Maggies. I've heard them with 100 watts per side and they sounded good, but 300 watts per side is going to be badass. I can't wait! Thanks to Jim for the recommendation a while back on my Magnepan thread. I ditched the idea of using a receiver to power the Maggies and decided to ante up for some real power. The seller had a pair of them so that's why there are two in the picture.

wanting to buy from parts-express, and i need knowledge on how to choose a tweeter and a midbass even a crossover. i only want to choose from the buyout section, looking at 15$ a woofer 10$ a tweeter and depending on the price i could built one or buy a premade one. i realize the xover might not be on thr buyout section. doing a 5.1 system later i will choose a sub and plate amp? then do a small build . work at best by so will probably get a nice reciever, looking at denon.

I figured it would be fun to make a little HT Setup for the dorm room. I have a MAW-10 to use (can run at 8 or 2 ohms) and thought about getting some MLI-65 and a tweeter to match for up front. Not looking for anything spectacular just something really to play with. I'm more concerned about with amplifiers and reciever to use as I don't know much about them. Also I guess I would prefer to run active as I don't want to make my own crossover and would like experience with active anyways.

I basically need a receiver with a sub pre out and has to be a decent quality unit. Is this the one for me? Im running a 2.1 setup with some dayton 8s and a Fi Q18 powered by a dayton 1000w free standing amp.

I just wanted to post up and see if anyone here is running a projector for HT. I just upgraded to 4k resolution in my theater and love it. I went with the JVC RS4810 and the image is completely mind blowing. Plenty bright on my Carada 126" screen. I've been in H/T for yrs, so I figure I would share my build. My room 14x20, ran on 6 dedicated 20 amp circuits, CAT 6 cable ran to support my 1gb fiber connection. I can stream FLAC files, movies, etc. Speakers I run Polk Audio RTi12s, RTi3s, FXi5s, FXi3s, powered by a D-Sonic Magnum 1000S and Sunfire TGA5400. Subwoofers are dual SVS pb12/plus 2 subs controlled by the Velodyne SMS-1 sub EQ. I'm using the Pioneer SC07 as a pre w…

I have an old RF power hx2 10" that I broke, burnt the leads. I have no knowledge of home theater stuff or repairing subs, so what I was thinking is using this sub for my room. Is it possible to buy a recone kit that would make this sub suitable for this? What should I look for? Another question, what mono amp would I use for it? This is just a little side hobby that Id like to try, so I dont know if Im getting into something that gets really involved. I don't even know if I'll do this because I seem to be always strap for money (or spend it all on my car) but Id like to get some ideas and learn something.

A friend of mine would like to put together a system that is loud enough to be heard while playing drums. I guess the idea is that he plays while listening to music and he's tired of doing so while wearing headphones. budget: <300 for speakers and amp i'm doubt a small bookshelf system will be capable so i was thinking, with his budget constraints, pro audio gear. his best bet would probably be used gear but would anyone have a new option? he is not very interesting in building the enclosure himself and i live too far away to help him with that.

it's kinda home audio....it holds home audio stuff made out of solid ash....1/4" oak plywood....3/4" oak plywood....lots of dado grooves....lots of pocket holes...and lots of tenons. fun project. since cso is the no longer....i figured if anybody from there...was over here...and interested...well...here it is...

Are there any reccomendations for freestanding subwoofer amps? I am looking to acheive 400w@4 ohms. Here is an example of what I am looking for: http://www.crutchfield.com/S-qUe2aOrSg6j/c...amp;i=107SWA500 I want something more in the $250-300 range. Any suggestions? I will be powering two S-1 10s (the Sundown blowout sale sub) in a sealed enclosure.

I just picked up a Yamaha R-V503 for $6.99! I'm the processing of going through the thing to make sure everything works and was wondering if anyone had a 5.1 track I could download? I'm not really a movie fan so I don't own a single movie; nor have I ever illegally downloaded one. Doesn't need to be anything spectacular. I would just like to make sure "Dolby logic pro surround decoder" works. Thanks in advance! Oh! And I realize it's kind of a waste of time to make sure the 5.1 works if I don't watch movies and thus don't listen to anything recorded in 5.1, but I'm considering reselling this unit if I could get north of $50 for it.

Well I am looking to get some good Vinyl Cleaner. I am listening to Pink Floyd-Meddle and damn does this record need some cleaning. I have just been using a microfiber cloth to get the dust off but doesn't always work the best. Any suggestion for a product in the reasonable price range or technique? I've seen people clean vinyls using wood glue bat that is far too time consuming and uses lots of glue. Thanks for any help here

So i just got my behringer ep2500 today and hooked it up a couple minutes ago to my xxx. I bought some rca to 1/4" converters and turned the reciever on to hear the beast. BUZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ That's the only noise I can get, when I connect my ipod the sub plays fine, but when I connect the amp to the sub output of this older sony reciever (1999 if i had to guess ) I tried using my dad's bash300 amp and got the exact same noise from the reciever. Just wondering if anyone has any clue as to what I'm doing wrong or what is causing this problem. thanks

I am looking to get one of these projectors in the next week... getting the basement dry walled in the next few days here So far I am lookin at these 4. Mitsubishi HL5000BL $2300 http://www.projectorcentral.com/Mitsubishi-HC5000BL.htm Optoma HD80 $2700 http://projectorpeople.com/projectors/projspec.asp?itemid=22991&itmname=Optoma%20HD80 Sony VPL-VW40 $3000 http://www.sonystyle.com/webapp/wcs/stores...552921665307855 and the Optoma HD65 $1000 that comes with a screen http://www.costco.com/Browse/Product.aspx?...314&topnav= any help would be great

Currently im brainstorming for an HT system for my apartment at college. Right now im leaning towards going with 3 zaph bargain mtm's for fronts, mach 5 15, and the rest i need opinions on. First, id like a budget oriented reciever, but dont know what to look for really. Second, i was thinking i could just use a cheap bash/pe plate amp for the sub, but would like opinions? And lastly im not sure if i would need a pre-amp or any processing or anything else? I would just like the reciever to play music off an ipod, with my xbox 360 on games and dvds, as that would be the only uses.

Does anyboby know how to get the best bass outta 2 12 alpine type r with a audiobaun 4000watt amp?

I was originally talking to Scott about a Q 18 in my h/t setup, but I have a chance to get a used SSD 15 instead.. I was planning on asking for the copper coils with the recone, just waiting to hear back in the Fi section. I was goin to use one of the following plate amps with it, so around 500rms at 4 ohms. Bash 500 http://www.partsexpress.com/pe/showdetl.cf...tnumber=300-752 Dayton 500 http://www.partsexpress.com/pe/showdetl.cf...tnumber=300-806 At the moment I'm leaning more towards the Dayton, but I wasn't sure if it was worth the price difference. I'm open to any other amp suggestions too. I asked about the box in the Fi section, but maybe someone can let me know if …

I think Jim and I are the only full range people on here, but what the hell. I'm looking to build a replacement set of speakers to change up my basement setup. I'm currently running QSC pro amps and a pair of Magnepan MG-IIB's, the sub stage will be covered by Mach 5 audio MAW-15's in stereo. I've been listening to my BBBIB's more and more and I'm loving the sound more than my maggies, plus I'm itching to build something knew. I'm leaning heavily on the frugel horn spawns (the Bruce is what I'm looking at), something in the range of an 8" or larger full range setup. I would love to do another BIB, but I feel that my ceilings in the basement are to short for that, I…

Alright here is the deal. I have a 12" Brahma MKII dual 2 ohm sub. Then I have a set of 15" Acoustic Elegance 15" 1050g Passive Radiators. I am looking to make a sub for home use with good low end extension. As of now I don't know what I am going to use power wise but most likely run my current car amp off a DC power supply while I get money for a Plate. I'm new to PR design so any help would be appreciated. I am trying to keep the enclosure as small as possible. The Brahma Specs are as follows. Fs: 28hz Qms: 5.1 Qes: .47 Qts: .43 Vas 38L Re: 1.4 Ohms per coil Le: .9mH per coil. BL: 15.9 Sd: 436 sq. cm. Xmax 29 mm And the PRs specs are as followed. Fs: 4.9hz Qms: 51…

Hi Everyone. It has been a while since I've posted here... You may (or may not) remember my build log (start on page 5ish) The old Mercedes has reached a point where I need to sell it. It's sad after all of the work I've done, but it's getting too expensive to maintain. I spent a lot of money on the audio gear in that car, and I'm sure I won't get anything near its value when I sell it. So my current plan is to remove the audio gear and replace it with inexpensive stuff. I don't have a car to transplant the gear into, so I was thinking that maybe I could make a nice little stereo for my woodshop using my 3 way front speakers, my sub in a new sealed enclosure, and my …

Hi guys, let me start by saying this is my first venture into home subwoofers. I have a very old('97) Orion 2NT 15". It has been sitting in a cabinet in the garage so long I forgot it was in there until recently. I want to try it out in the theater room just to see what it would sound like. The spec sheet recommends 2.7 cu.ft. for a ported box. Should I build the same size box for home use? I have a 500watt plate amp that I will be using.

so i haven't been on here for awhile since been i have been extremely busy with my new house, puppies, and building my currect truck but now that summer is coming around it is time to relax, open up the windows and blast some tunes. so here is my question. i have a behringer 2500 for my sub duties in my home theater. i'm looking for a sub or subs that handle music well in a home theater application while sealed. i've tried ported applications in my house and with vaulted and peaked ceilings it makes it way to "peaky" and was not to my liking at all for all kinds of music. so what subs should i look into for a floor firing sealed applcation. size isn't a concern and i'll …

I've been out of the home audio loop for a while now. A friend of mine would like to spend some of their tax return money on a new home theater setup. I suggested going with a 3.1 setup because of the shape and seating of the room. The area I'm weakest on is the subwoofer. Does anyone have any recommendations for a subwoofer? Preferably someone with experience with the sub they recommend that can be bought or ordered, not "build a box for a Fi 15" " The amp will most likely be the Denon AVR-587.