Home Audio

I've been getting the itch to do a 5.1 setup with a pair of nice front speakers. I've always wanted to use some Peerless drivers and I've read a lot of good things about their components. Zaph thinks highly of them so I figure I'll give them a shot. I'm looking at the 810921 tweeter, 830872 midrange, and a pair of the 830883 woofers for the 3-way fronts and just using a single tweeter and woofer for each of the surrounds. I'm undecided on what drivers to use on the center, but maybe WTW. 810921 Peerless 1" textile dome HDS tweeter Nomex 830872 - 4" Nomex cone woofer Shielded Exclusive 830883 - 7" woofer I've been wanting to test out Madisounds crossover design service as…

What could be in these?

i keep seeing these in the ad bar on this site and the price looks really good http://fluance.com/fluan5speaks.html?gclid...CFQMngAodZzDx0A either thah or these: http://fluance.com/fluanhigthre.html my living room would look nice with either one. i like having a set of full range towers instead of separate pieces

i need a reciever thatll work with my behringer ep1500. my current one has no sub out, and the only one in the house that does is a HT reciever, and it sounds like ass. should i find a stereo reciever with a sub out, or a HT reciever? being that its for music, i should get a stereo one right?

Hey guys, I'm trying to make my first h/t setup. I really need two seperate setups, one to please the wife, and a second for me. I've been into car audio for years, but until recently I was only home for a few hours to sleep, so the car was more important than the house. I'll give you a run down of my expectations and limitations, as well as what I already have/will have/have planned. Expectations: I really want something that's going to sound good, get the full range very well, and not break the bank. I'll probably have to take my time to get everything I want right, but I need to know what to look for. Limitations: My wife. She wants a decent sounding system that'll be…

http://show.audiogon.com/cgi-bin/psmf.pl?0...mp;Vsa&home click on Premium then click on VR-10 MKII: The Valiant 85,000$ :faintthud:

this is the final diagram of how im going to build it. we moved in a few days ago so i was here long enough to move the couch around, etc, and take measurements. the blue is going to be the desk. on top of the desk im going to build shelves. i think its gonna look bad ass...my problem is, i cant make it until i get the boxes designed. should i put both in that corner next to the couch, or put one there, and the other sub on the other end of the desk, by the closet door?

ok heres the deal...im gonna order my 2 mj-18s whenever, its not on the top of my list right now, as i dont have a reciever yet, or crossover for the sub amp, etc...but i need the box built so when i get the subs, ill just drop them in. however, ive got some idea's, and id like your input on them. ive been told to do about 4.5 cubes per mj-18, tuned to 30hz. so im just gonna make a 9cu ft box tuned to 30hz (unless you guys suggest something different) and what i want to do, since space is limited, i want this to be the bottom of my desk. meaning the subs will be down firing (possibly the port too, if not, i dont care if the port is showing) and on top, what im gonna do is…

Someone posted up some macro pics of these absolutely beautiful drivers a while back. I think it might have been NDMStang, but I'm not sure. I think they were posted on this forum so that is why I am posting this here. It was a smaller (6"?) driver with a carbon fiber cone and chrome phase plug. I remember reading something about them being produced, but I never saw anythng about them again. Anyone know what I am talking about or have I had too many drinks on Cinco de Mayo?

Currently im brainstorming for an HT system for my apartment at college. Right now im leaning towards going with 3 zaph bargain mtm's for fronts, mach 5 15, and the rest i need opinions on. First, id like a budget oriented reciever, but dont know what to look for really. Second, i was thinking i could just use a cheap bash/pe plate amp for the sub, but would like opinions? And lastly im not sure if i would need a pre-amp or any processing or anything else? I would just like the reciever to play music off an ipod, with my xbox 360 on games and dvds, as that would be the only uses.

These are my Magnepan MGIIB's, pretty darn nice speakers I think. They are just huge, 6' tall, 21" wide, and only 2" thick though. The other speakers you see are my Fostex FE103E's that I built walnut horns for, they are my brother's now and I still have to do some fix work on them, sand, and finish the cabinets. The maggies are not in ideal locations, but its about the only place to put them while I'm here at home. On to the pictures! The gear running it currently Yea, they are tall. (I'm around 5'10") We might have a book or two in the house

ok well im sure some of you have heard about "HORNETS NEST" over on floridaspl.com....this guy gets 1/2 off retail on any rim/tire combo on superbuytires, etc...he told me he does plasma's/lcds too....i need an lcd for the new house, that will also be used as a pc monitor (mounted on my wall) my question is, what brand/model should i go with? i dont need anything TOO expensive, but i want at least 42"...im thinkin samsung or sony?

Just looking for some help hear, What do pre amps do? What are some things to stay away from? How do you run more than one amp? What are some good brands?

Hey guys, hope you can help with some info, I'm building a sub for my home theater, using the RL-p15 and a QSC RMX1450, the amp is rated at 1400 watts at 2 ohms bridged. What would be my best option for hook-up to the amp, Dual 2 or 4ohm? Dual 2 ohm- one coil each side, or dual 4ohm to 2ohm bridged? Also this will be a ported enclosure, I can't do the 10 cu ft as stated as optimal, whats a good compromise betwen optimal and minimum sq ft for this set-up? thanks in advance!

Here is a little list of the equipment I am looking at getting. Reciever: Yamaha Rx-v661 Dvd: Yamaha DVD-C750 Speakers: 3 pairs of Axiom Audio M3v2 bookshelves Axiom Audio Vp-100v2 center Substage Amp: Behringer EP2500 The woofer(s) is still undecided, but that is ok, because this will be next years project. Leaning towards a single TC sounds 3000 (15") or a Fi Q (18")

Got all of the pics up from HES this past weekend. Some absolutely insane setups there. The biggest surprise of the show in my eyes were the Silverline Minuets that cost $600 per pair. If I didn't have my Maggies at home I would have bought a pair on the spot. I'm usually not a big fan of bookshelf speakers, but the Minuets were just stunning in every way. Tons of over the top and uber expensive eye candy as well. Finally got to hear the Cabasse La Sphere's in person as well. Nothing like dropping $150,000 on speakers... Oh and Jim, more tube amps than I have ever seen in my life. The Wilson room was pitch black except for the tubes glowing, it was absolutely beautiful…

I've been eyeing a few different tube preamp kits and just wanted to see what you guys think is the best for the money. The Bottlehead Foreplay III has some great reviews, but it is $400. I'd prefer something less expensive and I don't need anything too crazy. Dual RCA outs are a plus and I would love to get my hands on an original Foreplay, but haven't had any luck finding one. I've been reading on DIYAudio.com, but everything is a bit scattered over there. Building from scratch is an option, but tube preamps are a bit new to me and it is tough deciphering "good" plans from the bad ones. Any suggestions are welcome and thanks ahead of time.

Just got me a M-5 MJ-18 4 ohm, and was looking for a new or used amp to put to it and was wondering what kind, plat or rack mount. I like the rack more for the fact that im not committed to just the sub and can use it on my speakers instead if i wish. Just trying to get some ideas, brands and prices are a plus. Thanks, Aron G. turtles1118

I'm looking to do an IB setup in my basement with a pair of 18s. Which drivers would be better, the Q series or the SSD and why?

http://www.crutchfield.com/S-Yqrw4yBuiBZ/c...mp;I=580HTS700B I'm pretty new to the HT scene and I was wondering how do u guys think that setup would do me to start off? I was looking for something nice to go with my Samsung 32" HDTV and PS3 to play my blu-ray movies on and video games. P.S. i'm looking for a good 5.1 setup. with a good reciever, 80 watts to the 5 speakers and like 1 sub that can handle 200 watts and sounds clear and deep. i'm up for getting one of those powered subwoofers if i find a good option that doesn't have all the speakers and reciver bundled. I've got around a $600 budget.

hey guys... just to let you know i recently took a leap to build an EBS, an 8.8 ft3 sub!, using the mj18 and a rythmik amp plate and it is awesome! i am still playing with it and making a few adjustments to make it sound tighter. the box is large as you can imagine, 42 x 17.5 x 27.25 external dimensions with a port slot of 2.25 x 16 x 29, tuning at 18hz. it sits behind my couch down firing, with my computer table on top. so far, it sounds great but i need to make more adjustment with adding and subtracting fiberglass. placement of my room has been a challenge since my room is so big with 20' ceiling, with a lead to a kitchen. it's a z shape room with no wall for bass…

Anyone know of a decent home receiver or integrated amp that doesn't mind 4 ohm speakers? I had a Carver CM-1090 but my sister somehow got it. Still trying to figure that one out. She got my CD changer, TV, VCR and speakers, too. Not looking to spend too much and don't mind used.

i keep seeing there add on the site and wanted to know if anyone used them if so are they any good?

Hello, my name is Chris and shortly I will be starting up a new business. Basically I will design and build custom loudspeakers enclosures, passives crossovers, and subwoofer cabinets. I can also aid in the design of subwoofer enclosures, if need be. I can offer a myriad of options when it comes to design, inside and out. I talked to Aaron (Denim) about introducing my services to the folks on forums. The insiration behind this business is basically the ability to pick and choose exactly what you want in a loudspeaker set. Everything will be hand built by me with care, and attention to detail. My website should be up within the next couple of days, and can be seen at www…

The website is now up, there are a couple of things I need to get started in there, such as build logs. Have a look, post a comment Thanks to Denim for letting me start a thread about this, and thank you to everyone for your contnued interest. www.customaudiotechnology.com CT