Ascendant Audio

What is the max amount of power you would run to a mayhem 18 for daily/music.....anyone running them daily with 4k or more?

anyone ever did a ported box at about 3.0 cubes @30 hz for an avalanche 15? if so how does it perform? i have alot of power to throw at it so i can build a smaller box

Are there any specs floating around anywhere I tried looking,but no luck. I didn't even know there were older Havoc's,i know they are rated 1500 rms,but i need some info to build a box and what would work if i needed to recone them in the future,i have owned a newer Havoc and i have to say it's hands down my favorite sub and i have owned or heard alot of different ones. Any help or info is very much appreciated.

Just wondering what you guys are running to your assassins for daily. I know they are rated for 250rms but am wondering if anyone is running more than that to them.....if you are running more, how do the subs like it? thanks

Snippet from the review. Enjoy.

Could i get a price on a motor and cone ? and can the motor fit on a Fiq basket

Aight I was bumping hard for bout 20 min or so, and then all the sudden my sub just stopped playin, and my whole car smelled like.. well you know. Rotten eggs or something. Amp is still on perfect, all connections checked. I know what happened, but I guess I just need someone else to tell me so I'll admit it.

Are Havoc's tinsels leads woven into spider or are they free? And if they aren't can a guy order one with them woven?

I lost my copy of BBP6 when my computer crashed a couple months ago. My original plan was to run the Atlas at 4 cubes at 30hz. Well, plans change, and I have far too much equipment to run in the back of my Blazer 2 door with the spare inside. I'm looking at probably 2-2.5 cubes tops, and I "want" to reach down as low as possible with some authority. Will 2 cubes tuned to 28-30 hz work without creating a narrow peaky response? I'll be running a set of Dayton Ref 8's in the doors, so I'm ultimately looking at something that will play from 60hz down to the 20's fairly flat. If this isn't going to work, I'll have to look into other sub choices, as the space is now going to h…

MSRP Assassin Series 8

Im probably going to go with 2 18" avas for my next build. I was thinking about 10 cubes with a 28 hz tune. What do you guys think? Also how much port area do these subs like? Are they able to move a bunch of air? Also I will probably be running 750 rms to each. 1500 total

Is AA still gonna offer the Arbiter HT 2 way and MTMs?

Hi, i’m from germany and i’m looking for some ascendant audio subs. i have an us amps usa-3000 (class a/b) and now i have to decline between two havoc 15d2 or a single mayhem 18d1. I want silly lows for tracks like “put on by jeezy” or “love for money by drama”. the box would be the same for both installations. i have space for a 7 cu ft. box after all displacements with a 85 in² port tuned to ~28 hz. So what do you think would be the best choice for me in this box? two havocs have more cone area, i think this could be an advantage for my goal but what i’ve heard the Mayhem is a very brutal sub. thanks for your help carsten

My buddy was telling me about a Ascendant Audio hummer last week? I was wondering if their is a Ascendant Audio loaded hummer? I thought i rembember seeing pictures of one somewhere awhile ago but can't seem to remember where at.

I am thinking that I might make the jump to a sealed box. But, do the assassins work well sealed?

I'm revamping my entire setup in my truck, 2007 Ram reg. cab. i've got a DLS A5 amp coming for power which is about 750w @1ohm. The 2 10's would be in a ported downfiring box between the front seats and going all the way to the back wall. The 2 12's would be mounted traditionally behind the seat facing forward, how much airspace would each setup need?

I was looking through all the threads on the new AA site on SSA and noticed that no one has directly asked for a release date of the new line. I understand, as most, that marketing strategy plays a big part in this whole scheme as does many other factors. Is there any way that we can expect a firm date on the new AA products and which products to be released (any new lines?)? I'm a big fan of AA (maybe the biggest) and would like to know when I can expect to have an opportunity to enjoy what Chad and his company have to offer. I've been told that the new line was coming out since december. I'm not pushing the issue, but just want to keep the AA fan club alive because many…

You asked so I taped. Hope you like them

This is Derek @ Audio Visions by DB swfl. Quit playing on the computer and answer the damn phone or return my messages. Mr. Niceguy is out of patience and needs answers. I will be sending you a private message as well and will continue to call the dealer line. Until then, you have my number.

I need some box reccomendations. I have searched and can't find them any where. It is going to be used in a suv. The desired response is flat and very low. thanks

ok can you send subs back to aa for recone repair and how much does it cost? do they send new sub back with black dustcover or the stock cap with aa logo

Hi all do ascendent audio have any measurements for a recommended ported box for there subs ? I have two 18" havocs an want them in one ported box .

ok well ill be having 2 ascendant audio Havoc 18 Dual 2's. i was going to go with a saz3000D but i wouldnt be able to run the amp at 1ohm, and dont want to risk running it at .5 ohm. so i need an suggestions to an amp/amps that would go good with these, i want around 1500 rms going to each sub. my budget is around 900, i can prolly go up to 1grand but thats it

I just hooked up my new havoc 18 to a behringer 2500. The sub is wired in series for a 4 ohm load. This is my first issue. The sub comes up at about 6 ohms when wired. this is not the 4 ohms that it should be. I realize it is never exact but 2 ohms off seems strange. The sub is wired according to this.. http://www.the12volt.com/12voltimages/1_2ohm_dvc_4ohm.gif I have double and triple checked it. Now here is my big issue. When powering the sub, at what i would call moderate levels, there is a terrible banging noise that comes on certain notes. I'm afraid that this is the sub bottoming out. However, I dont see how this could be with the kind of music that it is doing…

God its annoying not having a source to find out info on AA's drivers. Does anyone have the specs for the 18" Havoc? Well,i have most of the specs but i am looking for..... What is the cut out diameter? What is the overall diameter (outside diameter)? What is the mounting depth? What is the driver displacement? Thanks