Ascendant Audio

We had blast today ..really a lot of fun this is not my car , this is of one of our team members ,just so you know . so its an 30 year old VW beetle with an complete custom build polyester body and soft leather top . install: 1x 15 inch mayhem D2 in a 4,75 cu. ft box , port 76 sq. inch tuned to 49 HZ 2 dragster daa2201 linked (which are really crap)I'll explain why later 3x 72Ah Varta , they were sitting @ 13.2 V fully charged.(wich should be 13.7) the dragsters should putt out 4400 Wrms a 2ohms @ 14.4 linked ,we only got to 3200W @ 13.2 V @2 ohms,we also tested a Celestra DA4K , that one put out 2000W @ 2 ohms @ 13.2V (rated a 3200W @1 ohm on 14.4 and 0,5 ohms stable) …

q3TY7h7xI08 first vid shawty lo-Wow q_b4M9yQ0WE second gucci mane- Go ham subs kept cutting out cause my battery terminal was crazy loose got a new one

I've been wanting a new sub for a while now and may finally have the money coming. I've been looking at the Havoc 12", have there been any canadian dealers set up yet? I had talked to somebody at AA and they had said I could order direct, is this still possible if there is no dealers?

The specs look good and so do the prices.. but i want to see pics and im sure everyone else does... Are there any pics out yet?????

I have all of the parts to build a pair of the M-T speakers that were on the old AA website. Anyone have a copy of these? I am ready to build a pair (parts have been in my closet for over a year), and cannot find the copies of the schematic and cabinet drawings I printed. . . Thanks! Brian

I still have one of AA Atlas 15's and I am looking to make a new/ better fiting box for it. I wish to make a sealed box but do not know what the recomended enclosure size is. I tried Emailing Acendant directly with no responce. If anyone has the specs please chime in. Thanks, Erik.

Just ordered my set of Assassin 12's today (I cant wait!!!) and Im wondering what to do a/b the box. I have 4cubes total before disp of anything to play with. They will be behind my bench seat in my 84 GMC single cab, so I planning on the subs on the passenger side, with a slot port out of the drivers side. What tuning/port area should I use for these? I know my old 8" assassins loved higher tuning (45htz) are these new line subs different? Suggestions/opinions please!

Still working on my AA Arbiter and needed help with my Precision Port tubes. The enclosure plans call for a 3" diameter and 5" length port. The enclosure is a 1.0 cu.ft. I have two questions..... 1. What is the tuning freq. of the enclosure 2. Are the dimensions for the port specifically for a Precision Port or is this for your regular 3" tube at 5" length. Reason I ask is because the Precision Port directions have different direction for tuning. I guess this is because of the flare on both sides. I really need some help with this. AA experts I need you. Thanks, Bob

I am going to change my current setup and most parts I already have or will be shipped soon. One thing I am missing, is the subwoofersetup. Since this is really important to me, I need your guys advice. Just informational: Current setup: And the new layout...New setup: I was planning to go for 3 new Mag's from Stereo Integrity. But I am still looking at other options. One of those options, is 2x AA 15" Havoc's in a sealed enclosure. But that raises a few questions; I see mainly people here which use those subwoofers ported. But how do the 15" AA Havoc's sound in a sealed enclosure? And what is the minimum recommended sealed enclosure? I like the bass to be speedy (not …

Hi i looking to pick up a pair of 18 inch chaos subs, but im unsure where a local dealer is ... i live in scranton pa , 18504 can someone pm witha dealer location and price?

I am looking at the arsenals and chaos series subwoofers. The thing is I do not know what the prices are for the two mentioned subs. I am looking into 12's and 15's for both models, and based on the price I will be able to make the best decision on what is the best for the buck, since they are both high quality. The problem is that I have e-mailed AA twice requesting pricing info but have not heard back from them. I understand they are busy but it has been a week or so. I am pretty positive that I do not have a dealer in my area, but for those who might have some inside info my zip is 29369. All this being said what would be the best way to get in touch with them so I can…

do you think 2 havoc 18s can handle 2000rms per sub im just researching right now becasue im more then likely gonna be getting these for my bronco2 when i come home from the desert

I have a AA atlas 15 and was wondering if anyone could recone it to a 12? if so what would be the cost on everything, basket, cone, shipping? also would you just it a dvc sub or would it still have that odd smaller vc to change the qts?

I just bought a 18" Avalanche which im going to be using for HT use. I was wondering what size box i should make for it and what i should tune it to. Also about how many square inches of port i should use. Thanks.

So I hear that the Polly's are some awesome drivers. So I was thinking about using them with a nice set of tweeters with an x-over. Questions is, how do you run yours passive ? What would be a good tweater to use and a good x-over. Are they a good SQ driver ? I am building a SQ setup.

...what do u think how many dB could a Havoc 18" do.... in a proper setup .... on 1.5kW ... cheers *** SEBA ***

I got a problem i want two havoc 15s but they are 2ohm subs and my amp is 2500 at one ohm can i use the amp i got with two 2 ohm subs

went to a DB drag event this weekend .. won the 150-159.9 bass race class.. qualified with a 156.1 witch was kool.. won the finals with barelly a 155.. i hit the pause button twice on the start !! what a dummy.. but i still was able to catch up and win.. anyways the my asendant subs kicked ass.. well hope everyone had a good weekend !!! lil-john- vids...... http://s120.photobucket.com/albums/o175/pe...nt=DSCF6555.flv http://s120.photobucket.com/albums/o175/pe...nt=DSCF6560.flv

Im looking for a dealer of Ascendant Audio that covers the Western PA region. Im looking to get prices on a Havoc 18inch sub and shipping. Also wondering if these subs can be wired to 1 ohm succesfully. Thanks Ladies and Gents! Drop me a pm or ask for an email address.

anybody know where i can get a copy? thanks guys...

so i bought 1 HAVOC 15 and soon i will get it ! it will be powerd by SUNDOWN SAE-1000D and i wanted to know if the sub will play loud =] ? and some Member of the forum wrote me : THe SAE-1000D is plenty of power for that sub. Build the enclosure to suggested specs and you should be very happy 65 liter box will be enough ?

Can I please get the name and number to the closest dealer to zip 55423 thanks

so , can the stud on the back of an SMD be removed ? can I unsrew it ,I need the space ! I'd rather not saw it off because I might want to sell it someday

i have a post on steve's page and a few people recomended the aa 8's. and i have a box design i want to use.. but im not sure on the tuning and airspace..