Ascendant Audio

when will the arsenals go on sale i dont want to be caught off guard can i get a email when they do. [email protected]

I need the logo to put on a T-shirt. Id like to have the one thats on the website, the one where the logo is above the lettering. Thanks guys.

I'm almost ashamed to post the "before" pic, but I'm more into function than form and the sweet sounds of the poly mids/Vifa tweeter combo made up for it. Aluminum panel is to plug the hole left by my old JBL comps. Not the worst I've ever seen, but pretty unsightly. There's another mid behind the stock grill. I had planned on doing some fiberglass pods, but don't really care for the look of them. Too custom or whatever, just wasn't my thing. Here's what I started with:

I'm a soon-to-be Ava18 user. However, I'd like to get the cabinet started before the driver arrives, so I can plug, play, and grin. So if someone could confirm the dimensions I have, and fill in the ones I'm missing, I'd appreciate it. OD (with gasket): 18.5" OD (sans gasket): ??? ID (cutout): 16.75" (edit) Height of driver lip (with gasket): ??? Height of driver lip (sans gasket): ??? Also, assuming the driver is recessed by .75" (mounted on the inner layer of a double baffle) how much clearance should I leave for the grille? (I plan to adopt a cat after I move, so I think a grille will be necessary to make sure that no claws touch the surround.) As for how I'll use it, …

I am currently running a single Dayton Titanic 15" for my HT's low end. I would like to get some input on which line would work best. I would love to sport some AA in the house. The 15" is currently in a 3cf sealed enclosure. After sub, bracing, and amp displacement, I would estimate internal airspace at 2.5cf. I want to increase efficiency as well as increase displacement w/o sacrificing the lower frequencies. I know a new box is in order. I have quite a bit of room to work with in the living room. I was thinking 4 15" drivers sealed. But I may be dreaming. The current sub integrates very well with the front L/R/C channels I have. I guess I just want a bit more output. C…

edit denim: please don't the main sections for item sales, we have a classified section for that which you can use after 25 posts.

Just curious?

Do you guys plan on putting out a comp set I heard you guys were and was trying to clarify that so I can kind of have set in stone what front stage I will be running.

OK guys when SQ competitors jump into SPL the results can be less than favorable... I was running a sweep before my SPL run and got down to 37Hz @ 138db when I hear the noise that everyone dreads... the cone bottoms out. I reach for the volume knob but the face on my 9861 (non-motorized) has fallen down (can't control the volume with it down). Anyway to make a long story short ... the former for the voice coil pretty much exploded and now I need a recone. With Ascendant Audio's website now a one pager contacting Chad is going to be tough. Does anyone know how I can get in touch with him? BTW-This is one of two Avalanche 18s and the other sub is still playing fine. …

what is the volume i should port these at, and to what frequency for car usage? also how big of a port should i use? thanks!

check out the pr0n i just took today of my AA poly mid. of course it was distorting like crazy, i just wanted to see how much i can make this jump. but this thing moves more than most subs. it was played free air. these are just screenshots from the movie:

I've got a pair of 15" Avalanche subs. I want to build a box, but I don't know what size it needs to be. I'm undecided on whether I'll be using them in my home or my car. My car needs a little work, that's why I'm undecided. Anyways to the good stuff. I want to go ported for either application. For the car I'm guessing a tuning frequency of 32 to 35Hz. For the house I'm thinking 28Hz. I'm open to suggestions. For power I've got two TMA 1000.1 in the car. Oh, by the way the ride is an 86 Mustang GT hatchback, the rear seat isn't used so it's folded down flat. The subs would be wired to 1 ohm each, one sub per amp. In the house I've got a Behringer EP2500. The subs would be…

Ok I currently have a MKI Brahma motor heading my way, my plans are to recone this into a 10". I was told by the previous owner (seller) that I could get recones through AA. I've been looking around trying to find an email address and figured I mine as well post up in here to try and get a response. If anyone could help me out I would appreciate it!!! Thanks! Jon

-------------------------------------------------------------------------------- hi had i bought a 15" ava and i was just wondering what the displacemnt of the sub is and what sized ported box i should put it in thanks!

Just wondering if anyone has had any updates about the release of AA's new line. I know that the projected date is around July 4th, but I also know that things change. Thanks.

On the old webpage it didn't recommend any box sizes for HT use. Does that mean the arsenal shouldn't be used for a HT sub. Can anyone give me any recommendations on a box size for the 12" version? I'm a noob when it comes to home theatre. Thanks!

Who is administering the warranty for Ascendant audio? I realize that there is a merger with Ficaraudio. I wasn't sure if I should post the question here or at Ficaraudio's spot. Scott and I have exchanged a few e-mails as I have been trying to isolate my problem. He has been EXTREMLY helpful, especially considering how busy he must be. Now that I know which driver I'm having issues with and what part failed, I'm curious which vendor will help me and if the 3 year warranty is still valid. I've got my driver boxed up and ready to ship, just wondering where it'll end up. Carl

I been feeling a little under the weather but desided to make a little vid this morning. Single 8" AA Assassin Sundown Audio Sax-100.2 T-Line Type Enclosure Sorry about the poor video quality, the video editing program killed it. The camera dont pick up alot of flex but i did my best. I have 3 more, once my box is done they will be running off a saz-1500 in a ported box @ 40hz. Wont have the lows like this box did but it time for something new http://www.youtube.com/watch?v=ZwueovUYt6g

Avalanche 12: Fs 23 Hz Vas 80 Liters Qms 4.36 Qes .39 Qts .358 Znom 4 ohms Re 2.8 ohms Mms 197 g Sd 480 cm^2 - (74.4 sq.in) Pnom 800 watts Mounting Depth: Gasket on - 6 9/16" (6.5625") Gasket off - 6 11/16" (6.6875") Avalanche 15: Qts - .3 Qms - 3.5 Qes - .33 Vas - 300.6 Liters Fs - 15.7 Hz Re - 3.2 ohm Le - 2.4 mH Xmax - 27mm 800 Watts Rms Sd 116.09 square inches. Mounting depth - 7.875" <---- Not sure. Avalanche 18: Qts - .4 Qms - 6 Qes - .43 Vas - 550 Liters Fs - 16 Hz Re - 3.2 ohm Le - 2.4 mH Xmax - 27mm 800 Watts Rms Sd 187.55 square inches. Mounting depth: Gasket on - 9 7/16" (9.4375") Gasket off - 9 9/16" (9.5625") Anyone feel free to jump in and correct if anyt…

Who can I email for warrantee info for my Assassin 8, the cone seperated from the motor. I'd like to keep this private, no need to put pics or w/e here. Thanks guys.

I want to do a slot port what sq inch opening and depth do i need? if I went 4" round port what length would I need to achieve the 32hz ? also how much cubic ft do i need grosslywhich would already figureboth woofer displacements and port displacements....thanks guys. specs for the AA assassian http://web.archive.org/web/20060502060130/...sin12specs.html

Chad, Just trying to reach you here. Please check your phone messages about the old 1803. Thanks, Jim

I have an ava 15 ... and i wanna know what kind of power i should put to it ... right now i have a kx1200 that i could run to it but im afraid with that power in 2.5 sealed enclosure it might be to much ... any suggestions? maybe a dif amplifier?

I was looking through all the threads on the new AA site on SSA and noticed that no one has directly asked for a release date of the new line. I understand, as most, that marketing strategy plays a big part in this whole scheme as does many other factors. Is there any way that we can expect a firm date on the new AA products and which products to be released (any new lines?)? I'm a big fan of AA (maybe the biggest) and would like to know when I can expect to have an opportunity to enjoy what Chad and his company have to offer. I've been told that the new line was coming out since december. I'm not pushing the issue, but just want to keep the AA fan club alive because many…

*If you have specifications for other drivers that are not listed here, please pm them to me rather than adding to the thread. This will make for the most seamless and easily viewable thread.* Atlas 12" Low Qts Specs Fs 23.2 Hz Qms 4.9 Qes .354 Qts .33 Vas 128.5 L Re 2.8 ohms Znom 4 ohms Xmax 18 mm Sd 481 cm2 Mms 119 g Vd 1.73 L RMS Power 300 watts BL 11.7 Spl 1W/1M 88.5 dB Spl 2.83V/1M 92.6 dB Le .86 mH Cms .395 mm/N No. .442 Cutout 11.125" Diameter 12.5" Depth 6.5" Weight 21 pounds Mid Qts Specs Fs 23.2 Hz Qms 4.9 Qes .465 Qts .415 Vas 128.5 L Re 2.8 ohms Znom 4 ohms Xmax 18 mm Sd 481 cm2 Mms 119 g Vd 1.73 L RMS Power 300 watts BL…