Ascendant Audio

:popcorn:Okay guys if I new I wouldn't ask. But I gave my own opion to my customer.Wich is better more durable. Handles power better I think the t2s are over rated but seems to be a pretty rugged sub. But I think the havocs will. Do just as good if not better. So could i please get some imput on this...........

I want to see any vids of 1 aa havoc 18. Not 2 or more just one. The only vids I have found are the 2 0r 3 on youtube. Please post your if you have any I really want to see them.

I have a SPL-D 1500D powering a AA Havoc 12 in a box that is 2.2cuft and tuned to 32hz. It plays the low end immensly (<36hz) but on the 40hz+ it doesn't do so well. Amp settings are LPF at 63hz, subsonic approx 30hz. Voltage is good, always at 13v or above. Any advice ?

Were those the AA Polys you were running? Can I get some specs on em like rms, impedance, mounting depth, xmax, sensitivity? And finally how much do they cost? Thanks alot!

i received my sub last week but i didnt notice it was an assassin and ive been runing 600rms to it for the last couple days and it was pounding plenty hard for my taste. however today i found a box in my home with a new sub in it. i quickly noticed it was the arsenal i had ordered and that ive been runing an assassin with over twice the stated rms for the last week. cant believe the sound quality im getin from just one 12!!! what quality product. cant believe i didnt blow the assassin!!!

which is better for overall sound and loudness? this will be use BTW in a sedan... both will fit, but which would benefit more? Thanks...

I was lurking around on the Ascendant audio website and i found a picture of this lowered truck.. I don't know if it's a company truck or just a customers but there is only one picture of this truck, if you guys have ANY more i'd love to see them! http://www.ascendantaudio.com/gallery.php Thanks, Dom

here is a pic of the new ascendant audio mayhem.

8NBZYoc7NJ4 go buy these subs man. 2500d orion amp. not even full tilt

Made some vids! That last vid you'll notice I jumped back in the truck, seen Po-Po coming down the street!!!

Well its the title... Any info on what size boxes these new subs will like?

What is the max amount of power you would run to a mayhem 18 for daily/music.....anyone running them daily with 4k or more?

I'm thinking about 2 12" Havocs and was wondering a few things. 1. What would sound louder, sealed or ported? 2. What would have better sound quality, sealed or ported? 3. What would hit lower, sealed or ported? I'm thinking about ported to 5cuft tuned to 30.5Hz. If sealed I'm thinking about 2.4cuft. If you think they would sound better in a different box size, please inform me. Thank you

Hey dudes, A per title, I am building a wall in my Car (E10 Corolla) With 2 Mayhem 18's, And between 5-10Kw of power. I'm not chasing numbers, I want streetbass but I am wanting to get reasonable numbers on a Mic, Was thinking about 14cuft after displacements tuned to 32Hertz, how does that sound?? I want to keep in mind that I will prob upgrade from Mayhems to SMD's at some stage next year maybe Any advice welcome Cheers quinny

If anyone is in tampa for world finals, come by and check out the van. Doing a little revamp on it for world finals. 8-AA Havoc 15's (tuned to 32 hz) 4-Kicker kx2500.1's 4-Kicker kx850.4's 16-AA Poly mids 16-Kicker KS25 tweets I have alot of work to do, not sure if I will have time to post pics. Only have 2.5 weeks, wish me luck!

In anyone's professional opinion, what port area would you recommend for 2 AAchaos 10's in a 5 cuft box running off 1 saz3000 at half ohm(or do you think this is too much for the amplifier?)? to be tuned to 33hz for street bass use. 5cuft is what i have available any recommendations?

Hi guys, A friend of mine wants to buy 2 12" Mayhem. He has an MTX te4000 amp for the bass, and he will do all the electrical upgrades he can later. He already has some Optima batteries, he needs to do the big3. His old sub was a Pioneer premier 15" spl monster !! But it has a problem ! All 3 Pioneer spl subs I saw here have been blown !!! I am trying to tell him that he needs only a 12" sub because he drives a small car with a small trunk : it's a Renault Clio ( 2 or 4 doors, I don't remember), hatchback car. He thinks he need 2 Mayhem on his MTX amp. What would you do ? One Mayhem D1 to use the amp at 2 ohms, and later another sub to run both with the same amp, if he …

OK... Thinking about gettting an 18" Havoc. I have been through a few different setups but still the one i miis most and compare everything to is my HDC315 setup a had a while back. Pretty simple as it was right when i started getting into car audio more. It was an HDC315 in a 4.5ft^3 box tuned to 42hz. running on a Planet Audio VX2200D at 1ohm with NO electrical upgrades, no rear deck proting, no sound deadenging etc... hit just under a 143dB. I have had a few different subs since including Atomic APX15, RE XXX, MTX RFL, Execution 15" etc... but nothing i thought was comparable really to the HDC315 as far as just plain hurting your entire body and making you want …

Here is a pic of the first AA 18"s doing 150.6 on the termlab at 28 hz. we also had 4 of the 15's doing a 155.8 with no wall.

I still have one of AA Atlas 15's and I am looking to make a new/ better fiting box for it. I wish to make a sealed box but do not know what the recomended enclosure size is. I tried Emailing Acendant directly with no responce. If anyone has the specs please chime in. Thanks, Erik.

Has anyone been able to get in contact with ANYONE at AA.. I've called (phone goes to VM) emailed everyday for the past 4 days, been emailing for over 2 weeks.. and have gotten no luck in contacting AA.. I ordered recones for a customer and paid over 3 weeks ago also a sub I received with a damaged basket that rendered the sub unplayable un-mountable unusable, I opted for them to send a basket and recone over 3 weeks ago and haven't heard from them since sept 17th 2012 where i was told it was going out the next day, I know it doesn't take 3 weeks to get here.... Normally i wouldn't be so worried but the 15" mayhem took almost 2 months to get here broken and now it's taki…

using win isd (im a noob with it so im checking with all you) aa recommends a 2.2 cubic foot box tuned to 33 hz but some one on here recommends a tuning frequency of 29. i used 2.2 cubes for the net and tuned it to 29 hz and picked a slot port with a hight of 8 inches a width of 1inch and a lenght of 8.13 inches. external dimension are 28" L x 16" h x 12.5" d sub displacement and port displacement where include. the port seem really small but again i have no idea being my first ported box design. i have done several sealed but that very staight forward.

Time to upgrade. Think I am going to do 2 SMD's now so the Mayhems need to go. Since this is a forum for Ascendant Audio I might as well let that be known here. The mayhems are Fing amazing, but as alot of people in the car audio field see....there is always louder. lol. That being said...whats the price on 2 18inch SMD's and where would a recommended place be to sell the 2 18 inch mayhems that I currently have?

all my coils read 3.0ohms is this normal? suppose to be dual 2s

I'm looking at getting a Mayhem 12 just curious if anybody's tried these. I was told he uses a triple stack BTL motor. Any good? I've got a sq q1-2200.2d monoblock 2200 rms @ 1 its either the mayhem or a fully loaded bl what do you think?