Ascendant Audio

Didnt come out right but here it is

Sold my btl18 looking into getting 4 15 Havocs here or my dimensions. Can I get 4 15's in these dimensions 35Wx38Lx35H thanks for the help ahead of time

I went to a local shop today to price some remote start security systems. I was looking at the Viper 5109. While looking at my truck the shop owner noticed my monster box with an 18 AA Mayhem. Without getting into a long story, he told me that the sub was no more than a true 500 rms sub (keeping in mind that he has never heard of AA) and said that his his two 12 inch Flame series Audiodahn subs powered by a Flame series amp would hit harder and be louder than the Mayhem ( silly silly man). He was so positive he would beat me that he said he would give me my alarm and install it for free if he wasnt.!!! Like I said THANKS AA !!! My alarm will be installed on Wed.!!

Do you guys have anymore left? If not, do you know where I can get one for a good price? Thank you.

What ever happened with the ***** ***** subwoofer line? Is the idea scrapped, behind, or just lost in the nether-regions of car audio space?

WILL YOU?

Hey i have heard of people having 6.5" components from AA, and etc... im looking for a pair that get loud and good. Currently running a set of mb quart premiums and one of the 6.5 drivers is messed up not sure whats wrong with it so i am looking for a new pair. I was thinking of getting some CDT's but i was going to see if anyone knew if AA had 6.5 drivers. I emailed nick with no response so i am sure hes busy. Anyone know if they make them still and if so how much... dont need xovers or anything just the midbass drivers.

Can I get an idea on the cost of reconing one of the newer Havoc 15's? And what would the cost be to convert it to a 12"? I might have a line on a 15 motor and basket for the cheaps.

i saw they had a 3in only 4 layer aluminum voice coil now alot have the 8 layer is this going to make a differnce in performance or anywhere. bc im am prob going to get one!

Are the 8" Assasins available? if so where do i look at them and purchase them?

Like the title says, what is the mounting depth of the 8" AA Assassin? *EDIT* NVM found the specs online.... Cutout diam. 7 1/4 Outer diam. 8 1/2 Mounting depth 5 1/8 Weight 13 pounds Fs 46.5 Hz Mms 80 g Vas 7.3 L Xmax 15.5 mm Qms 2.72 Spl 83.2 dB 1W/1M Voice Coil diam. 2 inch aluminum Qes .54 Znom 4 ohms BL 12.3 n/a Re 3.5 ohms Sd 187 cm2 Le 3 mH Rec. Power 150 W Voice coil Single 4 ohm Qts .45 Rms 350W Cone Paper pulp Car Application Assassin 8 Sealed CuFt =0.4 Ported CuFt= 0.6 Tuned @ 40hz

Just got a small question for you assassin users. how much wattage are you all feeding these woofers? im only giving it about 150watts and slapped it in my old JLW6 box and its decent but I was wondering if I would notice a large difference if I built a box to specs and gave it RMS wattage. let me hear your inputs thanks.

Can someone tell me where my nearest dealer is please. I need a recone for my AA Mayhem 15" D2. Melbourne, FL 32901

Im looking to buy some assassin 8's and im just tryin to find out the best way to buy or if theres somewhere online u can get prices and order info.

We had blast today ..really a lot of fun this is not my car , this is of one of our team members ,just so you know . so its an 30 year old VW beetle with an complete custom build polyester body and soft leather top . install: 1x 15 inch mayhem D2 in a 4,75 cu. ft box , port 76 sq. inch tuned to 49 HZ 2 dragster daa2201 linked (which are really crap)I'll explain why later 3x 72Ah Varta , they were sitting @ 13.2 V fully charged.(wich should be 13.7) the dragsters should putt out 4400 Wrms a 2ohms @ 14.4 linked ,we only got to 3200W @ 13.2 V @2 ohms,we also tested a Celestra DA4K , that one put out 2000W @ 2 ohms @ 13.2V (rated a 3200W @1 ohm on 14.4 and 0,5 ohms stable) …

Im running a poweracoutstik ovn1-4000d amp to them off a batcap 800. Which subs are going to have the best spl/sq rating?

Alright, here is my NEW setup that I will be planning. Two Twelve Inch AA Havocs, on a SAZ-3000D. Wired down to 1 ohm, so each sub will be getting 1500 watts rms. What would i need to tune the subs to ( I listen to mostly rap), What cubic feet for the box, and i would like to use tubes instead of a L or slot port. How many amp hours would i need to power the SAZ? I think im going with 120 amp hours, i have a stock 100 amp alt, big three with 0 gauge, and replacing front and throwing a powermaster in front and back. I have a RATHER large trunk, seeing how i have 95 Lumina there is already a 4.5 cubic foot box and its only taking up 1/2 of my trunk area i think i could fit…

hi my firends is trying to see which sub is better in ""SQL"" he is looking at an FI Q 15 and a AA havoc 15.. he wants to know which hits harder and which one has better sound quality...... and does anybody know how much a Havoc 15 would cost cuz i looked it up on their site and it does tell you how much

We are keeping very true to form and popping up with something brand new to the industry with no forum buzz or hype. Allow me to introduce the new power house in motor technology known very simply and only as Supergauss; A radical new take on ultra high Gauss motors. We’ll start off with a little bit of background information about the development of this technology. This is the first generation of Supergauss motor technology and was developed and licensed specifically for industrial applications. After the termination of the two-year contract with our clients and them phasing out of Supergauss I and into Supergauss II and III, we are now offering Supergauss I to the Ca…

Here is a little woffer porn And here is the MAYHEM opening the sunroof shade....

I need (2) avalanche 15d2 re cone's also (2) arsenal 15d4 re cones and i would like that to be more power handling in the arsenals Thanks

Hey guys im just about to purchase a 12" AA Havoc sub. Just wondering how big i should make the box and what should i tune it to? I mainly listen to rap, hip hop, dnb, dubstep the sub will be powered off a SAZ-1000D Cheers.

anyone ever did a ported box at about 3.0 cubes @30 hz for an avalanche 15? if so how does it perform? i have alot of power to throw at it so i can build a smaller box

My friends who own Synergy Audio in Watertown SD said they emailed you guys or tried to contact you in some way a few months ago but they never got a message back. Maybe they had sent an email but it got lost over the internet, who knows. A lot of people are talking about Fi around here, and they sell DD. They are interested in finding out some information about your Ascendant Audio line, they may be interested in being a dealer for your product. They are doing some big things in south dakota, they are doing 159 in a blazer playing King Kong. With 4 9515's and 8 DD M3's at 0 gain. Plays any song people want to hear, and does great on Chopped music. I think a lot of …