General Fi

I sent in a BTL to be replaced and it has been months with nothing sent back. It was said to be in the process of being replaced. The last email that I got back from Fi was on February 11th. I'm just not sure what else to do. My emails for the past month have gone unanswered, and you guys don't have a phone number. Please email me at [email protected] whenever you get a chance.

I was recently informed that Fi will have a support email with a dedicated responder. [email protected]

How much do they weight, the weight for the 10" shipped from ups says the package is 32lbs, how much of that is the BL and how much is packaging? I am wondering because I planned on inverting my BL and I am hoping it wont be so heavy that it flips the box over. I am putting it in a 1.2 cuft box, I cant remember hox much it weights but it cant be more than 45 to 50 lbs. I plan on buying another BL, I am having a dual 10" box built for the 2 so I hope the combined weight of the 2 will not be too much for a 2 cuft MDF box to handle inverted.

what i reccomended wall thickness and material for sub box? Fi Bl 12 loaded (daily) possibly future second 12" .....G

curious if anyone else has waiting on an order. i sent my paypal payment in friday and they havent claimed the money yet. i only ordered one 12 q nothing special....just curious if things are really busy lately or what?

45 Bucks an hour on the Term Lab at a well known shop. They have won alot of the USACi comps... They leave me alone or come out with me and they will help me with settings and what not to decide what the best setup for me is for DD and then give me the settings for SPL comps. The guy I talked to(My friend used to go to him as well for SQ comps) said that we will be done in way less than an hour...but the extra time is nice to screw around with things.. Any thoughts on that? I thought it was a good deal

Would it be ok to put the subs forward and port back into the car through the arm rest in the back seat. I was thinkin of doin sealed, but think i am hooked on ported enclosures. i will be doin a small cut-through behind the arm rest in the back seat where it could port into the car. what do you more experienced installers think??? Also, would I be better off using aero ports pointing into this opening or just use the basic port?

hey guys, looking to get a 10" X for my brother, any chance you have some or parts laying around??

Just purchased a 15" D2 Q Can't wait!

okay i have 2 amps strapped..........so if i strapped the 2 to a 1 ohm load it splits the load so that each amp is receiving a 1/2 ohm load? that makes it unstable if its a 1 ohm stable amp rite.......

1 of my BL subs blew and ive been trying to get this all sorted out and sent in but thats a different story. i was wondering if i could still play the one that isnt blown. ive already taken the blown one out of the box. i dont plan on turning it up high at all. just enough so i can hear music. is that possible or is it risky?

does any one have any suggestions before i make any purchases.... I will end up with two 12 bls loaded and would like some suggestions on what kind of amp to power these.....also any electrical upgrades I may nneed to make on the car, i.e. beefier alt., additional batteries, etc, etc, . any help woul really be apprec. Gary

http://www.youtube.com/watch?v=-dU6gRUeAmY

I threw an e-mail at Scott a couple days ago, then went on the forum and read the sticky about e-mailing about questions and stuff that aren't orders, sorry. Anyway here's what I wanted to say... two things, my feedback from my Q15 and a question on a 18 BTL First of all, absolutely love the Q15 w/bp, an absolute monster, the ported box, 4.8cuft @28hz was just insane, I was blowing away everything else I heard, W7 on a 1000/1 built to "JL specs", and two kicker setups, one pushing 2kw to two 15L5, and one setup pushing 3kw on 2 15L7's!! Because they had significantly more power then me (rf p1000-1bd) the higher bass tones were close, but as soon as it dropped low, I abso…

Hey guys, I know you guys are super busy but I got a few ??'s for you. I'm going to be buying either a 15" or 18" BTL in the next 2-3 days, but I came across a used 18" BTL with a cracked basket. The part that is cracked is the part that the surround is glued to. They are very small. It was juts reconed and the tinsels arent even soldered on yet. My question is, if i were to replace the basket, would i have to cut the spider therefore needing another recone, or can I remove the cone without damage? If I cant do it with out damaging it, Can you tell me how much a new 18" basket and recone is? and also how much a 15" basket and recone would be? Thanks for your time and hel…

hello i have a fully loaded btl motor...i need basket and everything to make this complete...if i shipped top you how much would it cost to make complete.....and how much just for the parts...or would you do a trade in towards a lower end less powered sub...just curious...marck

hey guys, im just using a temp ported box now that i made using the RE calculator. Its at 3.3 cubic feet for a 15" BL and according to the RE Calculator its set at 32.42 hz. I know its a little unnacurate but what would be safe to put my subsonic filter at. I currently have it set around 30hz ? thnx guys!

I am installing a 2-way active + sub system in a 2007 Civic sedan. Power will be provided by a single 5 channel Kicker ZX700.5 (sub channel is rated at 280 @4ohm / 420 @ 2ohm - under rated per reviews and birth sheets). Head unit is 880PRS. I certainly have enough power to run a X12, but is this even remotely viable for an SSD in a sealed enclosure? As I would like to stick with 5ch amp, my pother choice is a Polk Audio PA1100.5 which is 1ohm stable and can produce 600 watts (not sure about actual output on this model). Keep in mind my goals are to have better than stock sound and my musical tasted run from jazz, to classic rock, punk, salsa, electronic, hip hop, etc. I …

just looking for a price for a recone done by FI for a SSD 15. dual 2 ohm coils. standard SSD.

About how much excursion does a fi ssd 10 have? Im thinking about getting 2 and really need to know so ill be sure if their going to hit the back of my seat or not. Thanks

Looking for a quote on 12" and 15" recone kit with basket for each size. D1 coil config. thank you

amp is a orion 1200d, space aval is 4.00 cuft listen to 95% rap music so which should get louder and hit lowest 2 12'' si bm's or thje 15'' bl?

Hey i'm getting a 15 fi bl but i only have 17inches max height check out this plan is it any good? http://www.subwoofertools.com/calculator_d...mp;sheet_size=0

not sure if you guys are just extremely busy and not being able to get to the emails but i would like to purchase 4 replacement btl leads for a 15" btl. i sent 2 emails titles "ATTN SCOTT HELP ASAP" like you told the other guys to do that wanted to buy some btl leads. it has all my info in there, including address, sub model and options on it, my email adress, and my phone number, as well as what im inquiring about, which is the btl leads. just not sure if you guys recieved it. thanks George

I have a Hifonics bxi 2006D amp would it be able to push a loaded BL 12" or 15"? or do u have any ideas to what i would want? i would use it for daily music. amp runs 1 ohm: 2000 watts x 1 channel . im in a transition of cars (last one got recked not my fault) but im getting a 4 door bmw. so if i could get an opionion i would appreciate it thank you.