General Fi

im going to build my box today for my Fi BL 15" and i looked onlinw of what to use and it says to use Panhead sheet metal screws? shouldnt i use wood screws or are those wood screws?? and it also says to use drywall screws? why use drywall screws? whats the diffrence? and where do they go?

Hey guys, I am planning on trading my single BL 10" to a friend for 2 10" SSD's . I am trading because I just cant come up with the money for a new amp and another BL 10". So I figure, with my current amp (eD 9.1) I would be better off with 2 D1 SSD's. I have a custom built box for 2 10's , but never could come up with the monies to purchase the 2nd BL so the box is just sitting in my basement living room. I am thinking the SSD's would sound great off 1200 watts or 600 each. What I am hoping is that they will be louder than the single BL, I am assuming that with the extra cone area of the 2 that they will be louder off that alone. What do you guys think?

hey i have a couple last minute questions! i need to cut a hole for the sub to fit in! On the Fi web site i have a Bl 15" does the CUT ID: 14.125" mean thats the size of the hole across i cut?? and for the port i should screw those into the box on the top and bottom not just glue right?? Thanks! -Ryan

i dunno if this has been asked yet but im new here. i was wondering where i could get some fi decals at? i' like to get one thats pretty nice sized that'd look good on the back of a window.

I've got 2 x 18in BL's going into a wall and was wondering how big to make the port. The way it sits now, there's about 10.5 cu per sub. How much port/port area should i have. It is for daily booming and bass race.

Just like what the topic said, I got bored today and I had the energy to do something so I decided to make myself a stencil and spray the Fi logo on my box, I m pretty happy with the result..

I need to cut the hole 11 1/16" for my FI.Q right? It won't be here till friday but I'm building the box now. Thanks.

Just wondering if you guys could recone an Orion 15d2 H2? Jason

scott i will email you with all the details, just wanted to give you a heads up. need to talk to you before friday.

thanks scott. i just got the shirt and it looks good. thanks for the sticker as well.

i have a quick question... i bought a dual 2 ohm Fi BL i want to wire in to 1ohm so i can get 1500wrms out of the SAZ-1500D to the sub can i not do that..can i only wire the sub to 2 ohms not 1ohm??

Hello. I have only recently entered the world of Fi. Before the BL came out, when I was first looking around, there was another line of subwoofers. Are these still available thru Fi or not? If so, what are the specs on them? I did not think to record them before the X disapeared from the site. Thanks for the help! Ben

Hi, i need a 12 spoke style 15in basket for an MT motor and i was wondering if i could purchase one from FI? Thanks

Hi tech guys, I sent an email to shawn almost a month ago asking for information and I have not yet received any response. I saw the post in the stickies so I did not send it to the order line I sent it to the non sales related email. I did send an email last week to the sales email address and still have not heard anything about that one either. I have heard the customer service from Fi is top notch and I know you are all really busy, but I am not feeling the love Anyway I hope to hear for somebody Thanks

well i have a buddy that owns his own business and has 2 t2 15's on a T3k in an extended cab F150.....and i have my one btl 15 on a older model 1500.1bd and made his system look like sheit....thing is he said he absolutely loved my sub and is thinking about doing a bed cut with 8 Btl 12's and was wondering if there is any discount when buying more than 2 or 3....thanks

i was wondering if this box would work with a fi 15" ssd. my girl just ordered a hifonics 1200 to go on it and a stinger 4 gauge kit with a stinger cap. http://cgi.ebay.com/15-CUSTOM-PORTED-MDF-S...1QQcmdZViewItem

Which is louder for a single fq?? How is an 8th order like? I know 6th is ported in ported. I am trying tomake a box to peak extremely high at one note.

Net Volume: 4 cubic feet Tuning Frequency: 34 Hz Port Width: 4.25 inches Port Area: 65.875 Square Inches Port Length: 31.75 inches External Dimensions: 33 wide x 17 tall x 21 deep. It is for a 15" BL heres the link with the picture... http://www.subwoofertools.com/forum/ported...mp;Fs=&CE=0 i have a 4door honda accord so its not the biggest of all trunks...max height i can go it 17" inchs or ill hit speakers ..depth is 24"inchs and width is 33"inchs i put the numbers into the website and thats what it gave me.. put the woofer xmax numbers in from Fi (21mm) and the driver displacment (0.11cubic ft per woofer) IF ANYONE CAN GIVE ME THERE FEEDBACK THAT BE GREAT! th…

Congrats from all at Fi to tejcurrent for exemplifying what we like about this forum... friendly, helpful, and has no issue of beating the crap out of our products The $250 for "rebuilding the forum" goes to you. Let us know when you want to use it and well comp any products for you. Again... thanks for all the help on the forum.

This will be going in the bed of a truck and using a blowthrough. After much consideration, I decided to downgrade my system a little, well, halve it to the above. All 3 will be in a ported enclosure obviously. I listen to everything, but mainly rap and love some good SPL. SO, what would you do and if you want, why...... Would go with 4 15's all around, but dont wanna lose my entire bed of the truck. 4 12's can fit straight across with ports on the top.

I just want to thank Fi car audio for all the help they have given me. For those that dont know the story here it is.... At WF 06, I needed my atomics reconed and didnt have the materials to do it, so Scott and the guys said that they would no problem. I dropped off my sub at their room/workshop. About 10 minutes into the ordeal Scott informs me that the coil, cone and other parts are wrong. I was, needless to say, screwed. They said to hell with that. asked what freq I burped, what power I had and what class I was running. I didnt know why they asked since I in no way brought enough money to purchase a sub from them on the spot. The friend that introduced me to them sai…

Wait! I just ordered my FI.Q12. This will be the first time I've had a sub in my car since I was 17 an I'm 23 now. I am more into SQ now though. So I hope my Q 12 and pdx-1.1000 sounds good.

I just sold my Q12 (and a 15), I bought and installed 2 Rl-i8's and they sound great, but I just miss that deep loud low sound from a 12. The Rl-i's are little monsters don't get me wrong and they get low, but they're 8's, impressive as they may be, I don't know I just miss the Q12. I got rid of it due to space limitations in my truck. But I would be willing to give up that space again, in a small sealed enclosure. Now I was also looking at the TC-3000, I'm just skeptical of TC's CS and lack of info about the subs. The site shows the older 3k's and on the forum the new ones are talked about but very limited info and stock and they will be producing another batch of differ…

Well do I? Cooling? Flatwind(whatever that is)?

Hey i have a Fi BL 15" and i was wondering for my amp kit do i need to upgrade it. i havent yet to install the sub yet cause im scared my 4guage rockford amp kit wont handle the sub and might jack it up..will it..or do i need a 1/0 amp kit?? will a 4guage work or should i rip out the 4 guage? and if i need a 1/0 can i keep the existing ground cable and remote wire or do i need to change those out to?? thanks..and sorry for so many questions!!! -Ryan