General Fi

I need to order 2 Q15's for an IB system. Just want to make sure I get the correct build. Need a 2ohm load on each. Scott or Shawn...can you help me with this. Ready to order immediately. Thanks [email protected]

Well, I am making my own "Fi Car Audio" decals for my windows and I need a pretty big copy of the Fi logo. The decal is 6x4 inches. Scott can you give me a copy of a big sized one?

Scott, I have seen that you sent out a couple of tinsel leads to someone else in the past and was wondering if you could send me some new ones for a 12" BTL fully loaded. I noticed a couple of other ones are almost broken. Also what is the best way to put in the new leads? Any help would be great. Thanks

Alright plan on re-building the box and I may try this. Remember my trunk is extremely sealed off, I have computers and what not all on behind the rear seat and with the panel off it doesn't let much air intot he car. Anyways, I want to face the subs the same way, towards the back and have the port facing up and into the car. It would be built so the port goes directly into the rear deck. How you guys think that will work?

right now i have a loaded 15" BTL (dual 2) and am going to be getting a second one soon. as of now i have a ma audio hk4000d on the BTL. im looking to get either one or two amps to use for the BTLs. im looking for something that will give me around 3500-4000 watts per sub, but not cost an arm and a leg. what do you guys suggest?

Hey Scott, Are the specs the same on my subwoofer, power handling wise? Is it still 1000 rms or is it more now? I'm trying to figure out the right voltage so I can set the gains on my amp with my DMM. Oh and the shirt is awesome, thanks alot for the shirt and the stickers.

Like it says up there, Ive always like the RE SX type dust cap/cone because it so seamless and seckserific. Just wondering if Fi plans on doing that and how many other people on here would like that option?

I just received my Fi/SX 12 hybrid in the mail. It looks awesome and ill be sure to get some pics up and a video soon. How long do you suggest i play it low before i turn it up? I have the gain about 1/2 way up right now. Just wondering how long before I can cut loose on this bad boy.

Is there any possible chance that I could get a re-cone (and basket) for a 3" Aurasound NRT motor? Internal diameter is 3.185" External diameter is 3.254" Depth is 2.380" Bolt pattern is 6 x 4.912" on center Back Face

Ok My max dimensions are 15" x 36"x 22" these total up to have an external dimension of 7.18 cu ft and I come up with internal dimensions of 13.5" x 34.5" x 21.5" that comes out to 5.79 cu ft internally I want 32 hz tuning so I came up with a port of 4" x 13.5" x 22" This enclosure is for 2 FI qs with the bp power option once I sell my beloved ssds of course. I am looking to do subs facing my trunk lid and the port unloading to the side with a flair of course so please somebody help me to let me know these numbers are correct and what is the total sq inches for the port.

Thanks guys. You were nothing but helpful through the whole thing. Everything came in. Packaging was awesome. I can't wait to put it together. I look forward to hearing my 15" FiRE SExxx

hey guys, as the topic states i need recones for 1 mt 12 and 2 mt 15's all in dual .7. Can you please let me know how much they'd be shipped to toronto ontario canada? Thanks alot Don Doyle

Scott, I don't mean to bother you, but i sent a 15Q to you and it arrived 3 or 4 days ago and i was just wondering if you got it or what. I know the email is down so it's hard to communicate so i'm trying this forum. Please keep me updated if at all possible, thanks. -Mike Weisner

Well after two weeks checking the post office everyday, it finally came lol. my first thoughts of this sub is my god it is huge...built like a tank. it is pretty damn heavy to say the least. i have never owned a sub larger than a 12" so as you can imagine i am very excited to have this. thanks for everything Scott and the rest of the guys at FI. Im not sure there is a car audio company out there that can match your customer service, and of course top notch build quality for an affordable price. here are the pics i took so far i will start a build thread over in the build log section too.

Im looking to upgrade to 18's by the end of summer, and was wondering if you guys could recone my RE HC 12's into 18's. Right now they are being powered by a Ampman Revo 1500.1(which Im sure you are all familiar with) @ 2ohms cause I let the magic smoke out of the other 1500.1(I had two). Anyways if I got them reconed by you would they be ok getting 1500w+ each? Also could you reccomend a reputable shop that would fix my other Revo 1500.1? I havent found anyone local(Jersey) that I would trust to fix it. Sorry for the long rambling questions

hello, I have some questions about getting an 18 inch fi sub for everyday driving. I see that the Q line is built for SQ and has a hefty 27 mm xmax, but whats the real sound difference of a q 18 compared ssd 18s? and whats the freq response in a moderate sized enclosure for a Q 18? and does the 18s sound floppier than the 15s or do they have the same characteristics, but just move more air? Whats the magnet weight of the 18 Q? I know its a lot of questions HAha. oh and also what are the differences between Q and a BL that is customized for daily driving?

looking to put a sub in my DD just to add some kick to the stock system. I'v been looking at the Q and the Bl, Both 10" and 12" models. I like realy deep tones but the thing doesn't need to get really loud, i could never meter it. I have limited Space seeings as i got a 2006 Mustang and the truck is a bitch. Thanks Trey.

Im interested in buyign 2 btl 12" subs i want to no wat the 3rd magnet does also if i could use a massive 3000.1 to run them both?

Went to my first SQ comp today and took home 1st place (IASCA) Running 2 Fi Q's Bass score was 16 out of 20 possible points. Would have been better score but the judge said I could have used a bit more power on the subs. (ran them set to Eric Holdaway's ears and some judges like more or less here or there) Way to go Scott da man, judge looked over the install after the SQ judging during my presentation and smiled when he saw Fi subs, said he was happy Scott was going strong (exactly his words). Damn Scott everyone knows you! I will admit I scored 26 points behind 2nd place for SQ due to front stage/imaging issues but stomped ass in install by 48 points. I will get …

I know you rarley check this, so it's kinda for Scott and Nick too. But could you PM me your #, I would like to head up there Monday and I know you rarley check the forum lol.

i have a maximum of 42" wide x 12" high x 19.25" deep i can use keeping everything else stock. The amps will be mounted on top of the box but an extra Kinetik battery in the back WILL take up some of this box room. After some calculations, i came up with 2.8-3.0cuft NET after displacements for the 2 following setups- 3 10" Fi Qs SEALED off of 4,000w or... 2 10" Fi BLs PORTED at 34hz off of 3,000w I wish i could do 12s but i do not think subs and port up would sound good. PS- i dont have room to do 12s unless i aim them up and can only do them if i port up as well...i have no boxes to test how that would sound either...)

i will soon be getting 4 15" btl's can anyone tell me what would be a good amp to run these with, i want about 2-2500 watts to each. would like to have amps that are 12.5 to 13.8. this is going to be a spl set up and need good clean efficient amps. also if you know where i may can get a good deal from would be helpful also.(batteries also) thanks shane b.

Hey guys, i was searchin the forum for a little bit and found info on the "team shirts".... I was wondering if Fi has anything like a basic white t-shirt (not the 40 dollar button down one) for sale or anything like that with a logo. Also, where do I go to order some Fi stickers, i couldn't find it Maybe i wasn't looking hard enough, sorry if this has been asked a bunch of times, a little help would much appreciated, Thanks guys!

So, I have been debatin on a lot lately what to go with on 4 15's.....Q, BL, BTL. I love lots of vibrations and tons of SPL, so not real sure. My wife who rides with me a lot loves lots of vibrations to, but onlike my current truck, actually wants to hear the music with it...lol. I have no exp at all except watchin video, but you obviously cant tell from that. So, what would you guys suggest. For this install, money is not a very big issue....but like anyone, the more I save in the end the better, lol. Lookin for you guyz' ideas and input. If you haven't read my previous post, it is going in the bed of a truck with a blowthrough.

man sorry i forgot to include the Fi forum in my announcement of a few new vids.....im not used to coming around here too much but ill try to come around more. Its hard to keep up as you guys probably understand "Sactown Car audio" and "Tapout" are the latest......the Sactown one having some decent Excurt' on the subs.... scroll to the bottom.......theres 75 or more vids total http://www.stevemeadedesigns.com/index.php...3&Itemid=42