General Fi

what are you guy's favorite songs to bump. what songs hit really hard.

scott, i took my sub apart today and when i looked at the coil i found that my voice coil was really scratched up on one side, i dont know if its from me taking it apart or wut. i really doubt its from me taking it apart. i dont know how to put the pic up here so im just gonna email the pic to you. if its something with the magnet or motor i dont want this to happen to my new coils. please let me know wut u think.

does anyone know some websites that have good diagrams of how to hook up amps and subwoofers.

I was in street B, and got 2nd place with a 140.5db run. Another guy from here "chapter 2" got 1st with 145.9db in street B. We were both running 15" BL, except his box was bigger than mines and he had a bigger amp... :-( Charles another guy on here took 3rd in street B with 137.6db with 2 12" SSDs. Charles man, BIGGER Box!!! I took 1st in bass race 130-139.9. Another guy on here Tom took 2nd with 152.2db in Super Street 5+, he lost to a guy that had 20 15" RF T1, thats not fair. Tom also took 1st in bass race...140-149.9....Tom did end up doing a 151 or so in bass race, that was not recorded. This all took place at USaudio, which Fi sponsored it by supplying tro…

thanks man they look great just kinda sucks they don't have anything on the cone, im going have to find 2 small shocker stickers or something to put on there :-D. how bad where the old one's i had each hooked up to a viper 2500D and it was clippin a little. im going to do bass race/street max 1-2 then upgrade to bl's or btl's by the end of the year. what box do you think i should go with? this is going in the trunk/back seat of a 2002 sunfire so i have around 10cf max to work with. i was thinking about tunin it to 35hz's or an adjustabule port but i never did one before and im not to sure how. what do you think i should do? if anyone wants to know i sent 2 se 12's to get…

In my first post about this you said something about power handling increases. Is that still possible and if so would it cost more money? Also could you check to see if I meet the free shirt requirement? I hope my sub gets there soon bc I cant wait to have it back. Hit me back with any info.

I emailed scott and he got back with me on a price, and emailed him back but haven't got a reply. just wondering if i should write anything on the package as to why i'm sending them to him? and just wondering what the lead time would be from the time FI gets it till the time i receive them back?? Daniel

just wanted to know wut kind of soldering gun you guys use to solder the tinsel leads on to the subs, im goin to recone my sub soon and i dont have a good soldering gun. and wut percent silver solder do yall use.

I just ordered an BL 18 and chose the universal option and the extreme lead option. I sent an email the other day asking about these two options and never got a response. Then after reading alittle on here i saw that they dont answer none order emails. And after reading on here i found out what they are and would like to change my order. Do you all think this would be possible. I have emailed the company, and i did just order the sub. Just wanted to know if youall thought i would get a response from them before the sub was processed. thanks.

Did a revamp today of my pop's explorer. It had 3 RE XXX 15's. We swapped out for 3 Fi Q 15's with the BP Power Package, and he loves the new subs. Old Setup New Setup Please excuse the mess, I had a little grinding to do on one spot for the subs to fit normally, instead of inverted, and I really like it alot better, and so does Pop. It looks alot cleaner to me, the nice curved transitions look much much smoother. Here is the list of everything in the truck. Pioneer Premier 720 Cyberdyne Amp Voltage and Amp Temp custom molded into the dash Gain Control custom molded in center console 2pr of Adire Koda mids (soon to be AA poly's) 2pr of Vifa 25 silk dome tweets (1 set cu…

Do you guys have any other payment options besides paypal??? I was wanting to purchase a sub ,but paypal is the ANTICHRIST imo. Thanks

What cleaner could I use to clean the surround on the subs?

Just did this for SI, now I see it happening on Fi.... http://forum.ecoustics.com/bbs/messages/4/349209.html "Probelms with BTL's?" -Kevin Holden

me and my friend are about t ostart doing car audio work on the side whats the best place to get wire? power, rca etc. im about to get it from http://knukonceptz.com/ but i wanted to know if there was a place cheeper

how do i order the recones the loaded btl's. i need 2 recones for 2 15inch fully loaded btl's. dual 1ohm. i emailed fi audio and no answer.

hey this is for scott, I don't know if you've been getting my emails or not, so I figured since it's been a while I'd just post here. If you didn't get my emails lmk. I talked to Tim Roy of sound xtreme and he said he can recone them. so if you're too busy just lmk, and I'll have the one you have shipped to him or the guy who paid me for it. feel free to email me if you'd like to pm call whatever... Thanks, Tom

Just wondering how much it would cost for this sub shipped to Hawaii. The zipcode is 96789. According to the site the sub would come out to $319 shipped to the 48 states configured accordingly: Quantity: 1 Name: BL12 Item number: 0021212 Unit price: $319.00 Amount: $319.00 Ohm:dual 2 P Chamfer:no Cooling:yes +$40 Flatwind: yes +$20 Daily or SPL: Daily Extreme Lead:yes +$5 Universal:yes Amount: $ 319.00 Total: $ 319.00 Thanks for your help! Brian

Here is a photography project I did titled "Speakers of Nature." The idea was that the speakers I use in my car have been applied to nature to contrast the uncanny replication of sound that speakers can make to that of something so natural sounding that you would never have known it to be replicated in the first place. Anyways, that was the idea and from there I used everyday tools that just about every car audio enthusiast has to create this project. I will post the pictures in order from cover to cover. Thanks for looking! Ps. Sorry for the quality of the images but I didn't want anyone copying my work. But feel free to use my ideas, just don't claim it as …

If i place an order tommorow morning, whats the expected time for fi to put together and ship 2 12" BL's? and do they have a phone number? i'd really like to talk w/ someone

Scott, i sent u an email about getting a recone kit for my BTl 18. i also sent nick and shawn an email about it but i never got any replies. im sure you all get tons of emails but its been a while since i sent those emails. if u could email me or post on here or something i can give you all the info of what i need and you can tell me how to go about payin you i would really appreciate it. my email is [email protected] AIM screen name is crabmaster596 please let me know something i need this sub reconed at least before June 22. id like to go to scrapin the coast with a BTL instead of my old XXX thanks

Right now im rocking a 1x fi q 12" in a 2.5 @ 30hz box, it gets pretty loud, but i feel i have to strain a little to get it to my likings. I want to upgrade and have a few optinos that im asking you about I plan on buying a second sae - 1000D and strapping them and producing 1800 - 1900 @ 2 ohms. So that what i have to work with. Here are my options that im intrested in. I have a LSQ oriented system as you can see in my sig Option 1- buy another fi 12 q and sealing both of them each in a 1.3 sealed box or both of them in a 2.5 sealed box. I could build an amp rack Option 2- buy another fi 12 q and porting them in a 5 @ 32 hz box. could not build an amp rack Option 3- i co…

PM sent, waiting for reply

i will be entering my first bass race comp on may 20th. a friend of a friend was talking crap about my system, saying its nothing compared to his. so, i found a local termpro sanctioned comp and challenged him lol. i have a fully loaded 15" BTL powered by a ma audio hk4000d, 4 cubes ported box tuned to 34hz, 2 yellow tops, HO alternator, big 3. from what im told he's got 2 JL 12W6v2's powered by some crossfire amp(s) in a ported box, with no electrical upgrades. i have an 05 explorer and he has a newer jeep grand cherokee. it might be a close match up, but i have a feeling that i will take the win, at least from him. i will post my number(s) and also the results. im open …

I can design shirts, put them on basically anything you can wear and sell them for free in a store. Let me know if we can work something out and give me your email so we can talk about it!

here are some pics of the install, we still need to wire up the battery and ground the amps. heres what in it: kenwood ddx-6017, fully loaded 15" fi BTL, ma audio hk4000d modded to 1 ohm stable, ma audio hk398, 6.5" alpine type x componants in the front and no rear fill, theres going to be 2 yellow tops under the hood, 200A HO alt, and big 3 with 1/0ga. http://i40.photobucket.com/albums/e215/mos..._25_07_2022.jpg http://i40.photobucket.com/albums/e215/mos..._25_07_2021.jpg http://i40.photobucket.com/albums/e215/mos..._25_07_2020.jpg