General Fi

ok i am a big time noob to box's, but i do know ported is more spl and sealed is LSQ. For a BL you need to go ported. But for a ported box which would be the loudest out of the 4 combinations, small box small port, big box small port, small box big port, smal box small port? all i am concerned about is spl/loudness. (it is for a 15 BL.) thx.

Hey I bought a basket off of another forum member but it didn't come with terminals. I was wondering how much a set of terminals is shipped to 08620 NJ and a boob style dust cap because the one I have is dented. Thanks alot...

Hey everyone i have a 15" bl loaded and am needing a new box. i recently got a 2006 Jeep grand cherokee 4.7l (new body style) and im looking to get a new box for it...my box is kinda banged up and a bit small since i had a honda accord...im not much of a carpenter and i was wondering if anyone had a good box for my Fi bl 15"?? around 3-4cu and tuned to 30-35Hz?? i am putting 1500w daily to the sub. or if anyone can build one for me!!! i have looked all over the internet and there either crap from bestbuy thats not up to par for the BL or not tuned right! so please email me!! shipped to 66209 Thanks!

I would like to purchase a Q series 18, however, due to some issues with unauthorized use of my paypal account, paypal has locked my account and blocked my card number from being used. Are there any other ways that I can order with this card?

Ok, so I am going infinite baffle in my e28 and have a pair of Fi X 12's. Does anyone know how well they may perform in tis type of setup? Just a little info, stock the trunk is sealed from the cabin in an e28 BMW and therefore it is good for this type of setup. I will mount the subs on the rear deck. I am definitely an SQ guy so lower spl is fine with me. However, I cannot go bigger than 12" because there is only 13" of rear deck space. I would have to cut the wall all up just to get some air moving into the cabin in a regular box setup anyway. Any tips, questions, info is appreciated.

Does anybody here have an idea of how much fi charges to recone a fully loaded btl 18, the old one???? thanks

Hi I have an 18" FI btl(older model) fully loaded triple stack..and I broke the top outter ring of the basket in 3 places and was wondering how much this would cost to get fixed? and by fixing that would that mean a recone also?? zip is 72936 thnx, Trenton

Can someone provide me specs including displacement and power handling? I need a price on recone as well for it will need it soon.

I'm currently running an eD SQ10 in a tiny sealed stealth enclosure (see this thread in the eD forums for pictures) in the rear hatch of my Scion xA. It sounds ok but I'm looking for something a bit louder and lower. I'm considering replacing the hatch floor with 3/4" MDF and going with a 12" IB3 I should have just enough clearance for it. But, I've searched the forums and haven't seen any mention of the IB3. I'd probably pick up the SVC 2ohm version and put about 500 watts to it from a bridged Boston GT-22. Thanks in advance for any input. E

The website will be updated at 12:00 right.IF THAT IS THE CASE, that means the west coast gets to order there subs at 8:00PM if I'm correct. I doubt the site will be updated *could you please fix the Forum button too, It just refreshes the page.* Curt

I have a 12'' BL in a 2.25 or so cu. ft. box ported at 32 hz, and a Kicker ZX1000.1 running at 2 ohms and it doesnt seem loud enough, and i dont want to clip it to death. im wondering if a different amp can help? its a fully loaded bl so im sure it can take 1500 rms, what do you guys suggest? right now for electrical i have 1/0 for the amp and battery, ive done the wire upgrades for the grounding in the engine compartment, except for the alternator because of it being mounted by my chassis rather than near the hood. any suggestions there besides the alt positve wire?

I'm about to order a Fi 18" and was wondering, (and this may sound dumb) If I needed to add these and what they where; P Chamfer, Cooling, HiXmCoil, Induct Heat Ring, Universal. Would appreciate the help a bunch, Thanks, Dover.

Hey guys, i had some concerns about my future system. I'm planning to get an FI SP4 18, AQ3500.1D, and a high output alternator 200@idle and 375 max in the very near future. I can't wait to get it, but now I've ran into another problem. My powerbass oem replacement components and coaxials just aren't going to cut it. I'm planning on running 3000rms to the sub. About how much power would i need in some new tweeters and components, etc., to even out the sound? I don't want to hear JUST bass, i would like some nice highs and mids to come close to match it. Any power, speaker, amp, etc., suggestions would be appreciated.

Just an update. Email is back up as of 10:43pm PST. Shawn

are there any grills available that fit the 12 in ssd? Doesn't matter who its made by just has to fit.

I need a recone and basket for a AudioQue SD2.5 Can Fi do this? Thanks

im looking to change my setup. if i go the bl route, my box cuft will be 5-5.4cuft total including port area. if i go btl route, the box will be about the same total. they will be powered by a zx2500 which in the birth certificate says 2700 (if that matters) now i want to know which will be louder. this will be for daily use in my dodge charger. i currently have 2-15" L7's sealed in a 4.2cuft box and it pounds, but i just want to change it up. plus, i have a feeling that i can get louder than it if i go the FI route. thanx im also open to other suggestions.

let me know anybody here in independance kansas city who owns fi subs??

Hey, I have a 18" FI Q and wean i got the sub there was a little hole on the outer cone. can someone plz help me? I got your email Scott, about sending you some pictures and i sent them and i haven't heard back from you yet. PLZ HELP ME!!!!!! Thanks for everything FI!!!!! Thanks, Quentin K

Leaving now and going out of town for the weekend, email me if you have questions as i may have data service with my cell phone...other then that i will be back here Sunday night. Thanks! -Nick

I paid for my RE XXX to be reconed and then the 47 dollar return shipping fee for the XXX, and my UPS tracking number says it will get to your place tommorow. But I was emailed a UPS shipping notification from you guys yesterday saying you shipped me something. I am assuming you shipped me the recone kit accidentally. I emailed you guys a copy of this email with my full name as well. Please let me know what is going on, thanks!

Great company, they really do you right. Not to mention put up with arsehos like myself in a professinal manner! I will definetly be doing more business with Fi down the road!

now thats great customer service just got a phone call update on my 12" btl and it's going to be a little longer on the wait but that don't matter to me i'm going to stick it out till the end b/c i know it's going to be woth it. thanks for putting the effort into calling make me feel good to know that you guys accually care about your customers thank you fi

I am strongly interested in that van that was posted last dec. Still available? gary

I plan on putting 4 15" BTL's in the bed of a silverado with a blowthrough, not a wall. Out of curiosity, will there be any type of loss in pressure and sound by doin this? Also, if I make a small wall around the hole with sound deadener all under it, will that make a improvement on the loss if there will be any in the first place. I know that it will help with road noise, so i am doing it anyway, but am just curious.