General Fi

alright so i just got my recone in for another one of my 18 btls i reconed them before but this time its diferent as you can see in the pic below it has 4 leads if thats what they are coming out the spiders on each side total of eight on each side how would i solder this on im use too just two on each side

Is it possible to have some pics of the compression plug & axial cooling channels?

Today as i was listening to my music, my bass shut off. i turned off all power and parked my car at the house. I came out about half an hour later to find my car filling up with smoke and when i opened my trunk i found my port spewing smoke. After i was finally able to get the box out of the trunk, i examined the damage. The voice coil is pretty messed up along with the spider. I was curious if anyone had any clue what would cause that damage? today was an extremely hot day but i wouldn't think that would be enough to push my sub over the edge.. I've also been listening at that volume since i got the sub in september of last year. Also, will the BL recone kit on you…

Just stopping by to say hello its my first post over here and im making it because i have two packages coming to my door in 2 days Its two 12" SSDs cant wait to get them installed even though i think im underpowering them a bit (running em off of a zx1500.1) They should destroy my 2 12" CVR! even though im disappointed that my original shipping date got moved back from today to the 15th im still pleased with FI cause i know they make em well thats all the talking im doing for now till next time

Im lookin for 2 15" recones for my shocker extreme motors. Had apx recones in there before which were somehow assembled wrong from the factory. If theres a number i could call to reach fi directly or if they could email me at [email protected] that would be great. Im hoping to have these by mid next week if possible. thanks

after gettin the body work fixed on my truck (was rear ended last week) one of the guys from Vices autobody wanted to hear what it had. I wonder how they knew i had beat anyway, if you guys are tired of me posting so many vids just let me know, its not my fault i get stopped every day almost for a demo.....sometimes i film, sometimes i dont..its better when someone else films though i can concentrate on what im doing. also if you look in the vid its hard to see but people came out from across the street in the other buildings cuz i was makin so much noise. Thats where i panned over and started to snicker a little NA0-wnWzf6M oh, when i get it on the site it will be m…

hey im looking to order a SSD10 from you guys in the near future. i was wondering if you could get me a final shipped price on one to Edmonton, AB, T8N6W8, Canada. thanks guys.

amp RF T30001bd sub 1 18" BTL Fully Loaded Enclosure? I dont want to go to big while giving it this much power. Should i do 6 or 7cu ft I was thinking 7cubes with around 90sqin of port?

had some little problem, scott and paul got everything fixed so fast it was unreal. you could not asked for a better company and for someone to stand behind his product like scott does thank you, scott did not know me at the time and i bought my subs used not from fi when i was playing my subs before i went up and paul saw something wrong he started working on it

I love the new fi shirts, but am curious....will ya'll be releasing anything similar to a shop shirt like the older style Fi shirts i beleive ya'll had some time ago......or possibly a hoodie?

The box is 3.2 Cubes tuned to 32Hz It sounds really good and hits the lows very respectivly, i just need a bigger alternator. This lil puny 70 amp is killing me! Oh ya almost forgot, its a 10" Q dual 2 with added BP option and the amplifier is an RD 1700 watt monoblock

Myself and Troy (tejcurrent) attended a local competition today and I believe we respresented Fi nicely. I took 1st in the Truck/Suv 501-1500 class w/ a 146.5 @ 41hz, second in the StreetBass Unlimited class w/ a 142 something playing Gorilla Zoe - Do It, and was runner up in 139.9 BassRace. StreetBass is similiar to BassRace expect you run solo, are allowed to open doors & roll down windows, mic is at the bottom center of the windshield, and you average over 60 seconds. The BassRace was the most exciting since it was my first time doing BassRace. My first two rounds in elimination were cake, but in the finals I was up against Walt Johnson. Walt is the SC BassRac…

like the title states, looking for a Fi ssd motor (from the newer ssd's) if anyone has one laying around or a blown ssd or a fully functional ssd if the price is right. Somebody help me out! thanks guys.

Anyone know how much it would cost. I just emailed [email protected] about it. I'm so frustrated with this sub! I bought it from someone and it was making a wierd noise when he pushed on it and he put glue on it and it went away. But when we hooked it up it made a wierd noise when it played. He told me to put some glue on the spider in the center where it connects to the cone and I did that but it still didnt fix the problem. So I turned my gains on my MD2 down to where the sub played fine without it making the noise which was pretty much all the way down and used it from there. On the way to work today it stopped playing so I thought maybe the sub froze because it …

I was on a plane from Montana and landed in Vegas so I could drive home to California and thought I would drop by and see where Fi was so I stopped at barnes & noble to get a thomas guide so I could find the location of Fi. I found it, but being the monday of a holiday weekend, I didnt get to see much. I didnt think Fi would of been there for the holiday so, it wasnt any loss for me to try driving through Vegas anyway. At least I know where it is now if I happen to swing by in the future. I'm sorry if this was a teaser, but I thought some might enjoy reading about what I did.

Moved recently and no longer have the tools/space/time to create a proper enclosure. I'm looking to build a ~1ft^3 30hz ported enclosure for an Fi Q 10" or possibly a 10" Bl. Anyone in the Denver area open to assisting? Will provide reasonable compensation plus materials. Thanks, B

Can you try and fish it out of the pile. My address is [email protected] I emailed you about the recone for the LMT motor, and another for a XXX. Im ready to pay just need some confirmation.

So I just finished installing an fi q 18 in my car! Thank you Fi for such a beast of a sub. Pics to come!

hey i have a 15" BL and im in the market for a good amp.. i was looking at the Hifonics amps. are the alright?? they put out alot and they on the cheaper side..or should i just go big and get a good alpine or kicker i was looking at the Hifonics BXi2006D it puts out 1300wrms at 1 channel is that good enough heres the link i found it http://store.realmofexcursion.com/ if someone could help that would be great any suggestions or anything like that =Thanks

sorry for the waste of your time

Scotty poo...I emailed you about a recone Email was from justin tillery. Please email me back I am in a hurrayz...Dont make me call your cell phone. Last time I did that you were partying at SBN lol.

assuming the btls customs issues dont influence the soft parts for reconing, whats the average turn around time on send in sub recone on a btl? after being dropped off at ur facilities that is. thanks, will

they have told me that it will be available on march 1st, but it is almost the 3rd and still no signs of it coming, when will it be ready, i already want a pair

http://www.youtube.com/watch?v=xMhotTGBAXE

Hi everyone i got my fi bl15 today. i just finished taking out my t215 rockford out of the enclosure and puting my fibl15 in, same amp same everything but different sub was used, results were, both subs sounded same to my hearing, great sub fi i played the same songs i play everyday and i tought as if i had my t215 rockford in the trunk but it was my fibl15, well everyone i just wanted to let you know that both subs are really loud like i said very similar on how loud they can get.