General Fi

hey um e-mails not working again or something.. im getting an avalanche motor and 15" basket wondering if a Q recone will fit in that motor. assuming its a yes, how much would a 15" q recone be, with 1 stiff, 1 soft spider, dual 2 ohm (just the soft parts)

I am new guy around here looking for your guys expertise. I have a 94 camaro 3.4L and I am currently running an old school Memphis 500 D amp to a single P3 in a 2.3 cubic ft sealed box. Obviously space is my limit. I am looking to get my hands on one of the MD2D US Amps. I cant decide if I wanna add another P3 and run two 12" or upgrade my sub to one kick ass 12. If I do so I would like to keep the same box I have. I am after some deep bass, something that can take your breath away. Any ideas or suggestions would be greatly appreciated. Thanks! Zack

Hello all, looking for some guidance .. I am considering purchasing 2 FiQ 10's and using a AQ 1200 D to power them.. I am unsure on the options. i am assuming dual 2 ??? I drive an Xterra so i am considering building a box that would fit behind the rear seats following the slanted contour (thin on top to larger on the bottom) with the amps attached to the back of the box... I figure 2 10's because it would look better than 1 but not sure if i need 2.. Any opinions, thoughts, box ideas would be more than welcome.. Definitly looking for SQ and not SPL. dave

I was going to call Fi but damn they have no phone number listed . I have a 12" Q right now in a 2.58ft^3 @ 32Hz enclosure , built it for a smaller space . Now I have more room so I am steeping it up to 2 15" s . Already have my enclosure designed , 7.74ft^3 after displacements , tuned to 34Hz , 124in^2 port area . Going into a 1998 Acura Integra . Anyone know how much it costs? Or am I better off just buying new 2 15" s and selling the 1 year old 12" .

i have a Bl 15" that is blown and it needs to be sent in and repaired. but while its being repaired i was wondering if theres a way to upgrade it to handle 1500 rms..if so how much would all this cost to get fixed? or would it just be cheaper buying a fully loaded new one?

Will Fi sell baskets? I'm needing a couple 18" 12 spoke baskets. Thanks for any help.

My 18 Bl in ported box. it is in an SUV so should i have the sub facing the roof with the port facing the back?

alright its been quite a while since i have been on here but i saw that a recone link was added to the fi page....though it doesnt work its still progress.....so i have 2 12" Qs and the one has a fried tinsel lead and burnt spider....the other one just has a hole in the dust cap...i dont know how the kid did it but its pretty large...so what im asking is should i just send the one in and have you guys fix it and just buy a new dust cap then?

hey im not sure if i should get the 15" Q dual 1 ohm or a 15" BTL i know the BTL cost about 400 dollars. but im not sure if i should wait and get that instead?

Myself and Troy (tejcurrent) attended a local competition today and I believe we respresented Fi nicely. I took 1st in the Truck/Suv 501-1500 class w/ a 146.5 @ 41hz, second in the StreetBass Unlimited class w/ a 142 something playing Gorilla Zoe - Do It, and was runner up in 139.9 BassRace. StreetBass is similiar to BassRace expect you run solo, are allowed to open doors & roll down windows, mic is at the bottom center of the windshield, and you average over 60 seconds. The BassRace was the most exciting since it was my first time doing BassRace. My first two rounds in elimination were cake, but in the finals I was up against Walt Johnson. Walt is the SC BassRac…

hey, I have an old model 8" assassin s4, and my coil is shot, is there anyway i'd be able to recone this, would be willing to go to a larger basket size if thats what's needed also looking for a TC-1000 8" recone, the cone broke around the edge of the surround, anyone have any idea what to do about this? thanks andar

I just got my first set of Fi subs, I got 2 ssd's. On one of the subs the terminal is jammed opened and it is difficult to close or open it. Does this happen normally or?

Just Need A Simple FI Logo. Black Text On A White Background. Thank You !

i just got my bl yesterday, brokerage was 65$ :s. i was just wondering how do i know if my bl has the cooling option on it. i thought the magnet was supposed to have a hole through it when it had cooling, but mine does'nt. is this bad or am i just misinformed? thx-phil

Hi. im installing 2 SSDs to a Kicker Zx2500. Its a stock 120A alt in a Ford Fusion. I have a Kinetik Hc1400 that will be in the trunk. My first Question is will I need to have 2 runs(Power/ground) of 0 gauge from the stock battery to the Kinetik? Or can I just run 1 power between both batteries and ground the kinetik to the car? Also I have a Kicker zx650.4 for the doors and I would like to put Phoenix Gold RSD-6.5CS. MY stock speakers are 5.25s. Would this be too much work or should I just buy the RSDs in 5.25? Also can anyone refer me to a nice pair of 2 way speakers that I could put in the rear doors? I listen to mostly hip-hop/rock. Any input is great because I r…

A guy wants to buy my SSDs. I really see no future use for them. If I end up getting a car I will probably just put my bl 10 in. So they are 12" with copper coil, and 1 ohm coils. I used them for ~4 months with a hifonics 1606 amp, never clipped the amp so I know the drivers are in a-1 shape. Thanks for the input.

Just wondering if a kit can be put together for my Soundstream T4 15 inch sub d2 coils?

I want to buy another 18" SSD, but I need to have my current sub reconed to a dual 1 ohm. The sub I have now is an 18" SSD dual 2 ohm with the flatwind coil. Can I either send it, or drop it off (I live close) to Fi and have them do it for me? Thank you.

how do you think a sundown 1500d would go with the fi q with the bp option? would it be too much or just right and what would i keep all my power knobs on

Hey, just seeing if it would be ok to have your logo etched into plexi for my trunk.

Can you try and fish it out of the pile. My address is [email protected] I emailed you about the recone for the LMT motor, and another for a XXX. Im ready to pay just need some confirmation.

danielhattie2000 (4 months ago isnt a btl a sandwich too? phsballin10 (3 months ago) thats a BLT asswipe danielhattie2000 (3 months ago) oh sorry

how much power can you put to a btl 18 for bass race???

Leaving now and going out of town for the weekend, email me if you have questions as i may have data service with my cell phone...other then that i will be back here Sunday night. Thanks! -Nick

45 Bucks an hour on the Term Lab at a well known shop. They have won alot of the USACi comps... They leave me alone or come out with me and they will help me with settings and what not to decide what the best setup for me is for DD and then give me the settings for SPL comps. The guy I talked to(My friend used to go to him as well for SQ comps) said that we will be done in way less than an hour...but the extra time is nice to screw around with things.. Any thoughts on that? I thought it was a good deal