General Fi

are there any grills available that fit the 12 in ssd? Doesn't matter who its made by just has to fit.

I want to buy another 18" SSD, but I need to have my current sub reconed to a dual 1 ohm. The sub I have now is an 18" SSD dual 2 ohm with the flatwind coil. Can I either send it, or drop it off (I live close) to Fi and have them do it for me? Thank you.

I ordered an SSD and a BTL on the same order. The SSD showed up today and man is it beefy...but there is no BTL. UPS said there were two packages...but only one showed up. Do the subs ship when theyre done, or do you hold one to wait on another that takes longer? Thanks,

I have a 12" BTL with all the bells and whistles, and I decided to get a dual 1 ohm and not a dual 2 ohm sub. My question is: can I wire the dual 1 to to go with an amp that does one ohm. Or am I left with getting an amp that does two ohms(if so what will be a good amp for the BTL at 2 ohms)

I am strongly interested in that van that was posted last dec. Still available? gary

well got a BTL today. and when installing it i couldn't decide whether to take the logo off the bottom or leave it.. i left it.. should i take off the logo on the bottom of the magnet? i have the cooling option and the hixmcoil option. it didn't seem like sticker i should've taken off.. i just played it for like 5+ hours and it was fine. then i looked at some BTL pics and none have it that aren't already used.. only just unboxed ones have it.. should i take it off or what? thanks.

Rockford T20001bd and 2 fi Qs probably 12's is this a good setup? how would i wire it? dual1 or dual2?

I love the new fi shirts, but am curious....will ya'll be releasing anything similar to a shop shirt like the older style Fi shirts i beleive ya'll had some time ago......or possibly a hoodie?

Hi, my Fi 15" BL has recently stopped working. Today i got it tested at my local car audio shop. They told me that one voice coil is not reading a resistance and the other voice coil is reading around 25 ohms. They also told me the voice coil does not look burnt, it is still light copper in color. They also said that nothing smells burned and that the coil is not melted. My question is, does this sound like something that would be covered under warranty? Is any of this indicative of something Fi does not cover in their warranty policy? I noticed they do not cover open voice coils but the audio people i saw were not able to tell if it is open. I live far enough away tha…

My 18 Bl in ported box. it is in an SUV so should i have the sub facing the roof with the port facing the back?

i just got my bl yesterday, brokerage was 65$ :s. i was just wondering how do i know if my bl has the cooling option on it. i thought the magnet was supposed to have a hole through it when it had cooling, but mine does'nt. is this bad or am i just misinformed? thx-phil

hey guys i was just wondering who i can contact about switching my order from a 15" to the 18" btl and paying the difference i email nick but no response he is probably busy! was wondering if i could contact someone else i wanna change it before its to late!! thanks a lot guys!

I have a 15 kove armageddon that needs recone and i saw in another post that fi might be able to do it can anybody from fi help me with this thanks?

Hey scott, wanted to know if u guys can recone a first gen. (four spoke basket) brahma and if so, how much would this run? thanks, chi

alright so i just got my recone in for another one of my 18 btls i reconed them before but this time its diferent as you can see in the pic below it has 4 leads if thats what they are coming out the spiders on each side total of eight on each side how would i solder this on im use too just two on each side

i was emailing scott and or nick about a 18" basket and recone kit for a fully loaded btl 3rd mag dual 1 ohm daily option, and we got as far as scott asking for a zip for a shipping quote and i did reply back... 2 times... scott/nick if you guys dont mind could i get that shipping quote? if you dont feel like digging through emails my zip is 55407, Thanks. email is [email protected] (yes i know its a ghey sn but its old and use it for allot of stuff) lol

$500 is my budget including shipping and in a 4 to 4.5 cubic feet box powered by a hifonics brz2400.1d . I was looking at the 15" btl, 15" xcon, and the 15" zcon for $30 more. I'm going for spl, i just want it to be loud. also i look at 2 ssd 15 is a slightly smaller box then recommended. what are you suggestions/recommendations ?

Moved recently and no longer have the tools/space/time to create a proper enclosure. I'm looking to build a ~1ft^3 30hz ported enclosure for an Fi Q 10" or possibly a 10" Bl. Anyone in the Denver area open to assisting? Will provide reasonable compensation plus materials. Thanks, B

danielhattie2000 (4 months ago isnt a btl a sandwich too? phsballin10 (3 months ago) thats a BLT asswipe danielhattie2000 (3 months ago) oh sorry

So i got my FI Q back from a recone like 2 weeks ago. and since it's been hooked up i hear like a rattling type of sound when the bass hits during the majority of songs (some sound fine usually the loud bass songs) i went next to the sub to hear where it was coming from and it sounds like it's coming from the sub itself any idea as why this would be happening? Also if i put my back seats up (my box sits flush with the back seats so the sub faces the cabin while i drive so with the seats up the sub is touching the back seats limiting it's excursion) the sound dissapears and it sounds like clean bass on any song but since it is limiting it's excursion it is noticeably quiet…

Hi I have an 18" FI btl(older model) fully loaded triple stack..and I broke the top outter ring of the basket in 3 places and was wondering how much this would cost to get fixed? and by fixing that would that mean a recone also?? zip is 72936 thnx, Trenton

A guy wants to buy my SSDs. I really see no future use for them. If I end up getting a car I will probably just put my bl 10 in. So they are 12" with copper coil, and 1 ohm coils. I used them for ~4 months with a hifonics 1606 amp, never clipped the amp so I know the drivers are in a-1 shape. Thanks for the input.

hey im not sure if i should get the 15" Q dual 1 ohm or a 15" BTL i know the BTL cost about 400 dollars. but im not sure if i should wait and get that instead?

I wanted to send out a thank you to Scott and Fi for making sure I had a sub here and ready for NOPI Atlanta! Thanks guys David Smith Hotwired

Just stopping by to say hello its my first post over here and im making it because i have two packages coming to my door in 2 days Its two 12" SSDs cant wait to get them installed even though i think im underpowering them a bit (running em off of a zx1500.1) They should destroy my 2 12" CVR! even though im disappointed that my original shipping date got moved back from today to the 15th im still pleased with FI cause i know they make em well thats all the talking im doing for now till next time