General Fi

Hello There. I don't know if you all remember me, however I had started a log a while back for my subwoofer...and was wondering if I could make another here. Or would I have to make it in the "logs" section of the sound solutions forum? The reason I want to post it here is because I have taken some really great high-quality pictures of the full install and I think more people would find it here.

Alright 4 Fi Q 18s. I need a amp/s to do atleast 4kw rms, sound good, wont get hot easily, and no more than $1200. I dont want to buy used anywhere, I need *WARRANTIES* so if there are any link yall can provide I will highly appreciate it. Im looking at prices currently on wooferetc.com.

my pm's I've sent don't show up in my outbox/sent folder... is there an error on the site? I send one to shawn about the contest and a shirt/stickers thing, and actually pointing out I'd rather have Scott write reconed by sign his name and @ FI on the recones I'm getting but since it won't happen I'll take the shirt/stickers instead... unless of coarse scott does want to sign my cones instead in which case I'd pay for a shirt and stickers instead and may end up keeping the subs lol... unnLESS I could get him to sign other complete FI subs down the line... so people can complain as it adds dBs and that's why it's loud lol eh, 1am here, wife's pissed so I gtg... thanks…

im just wandering if its possible to fit 4 18's ssd's in a non-wall explorer XLT? granted, i know you cant just go out try it out, but i know alot of you guys have big suvs, and might have an idea. right now i have a range rover and i know i couldnt fit 24 cubes in there. any input is appreciated and i dont mind taking the backseat out but i really dont want to do a wall. the explorer XLT would be a later model like mid 90's if that changes anything

Hi, this is Logan from ecoustics. This is my FI BL 15" Dual 2ohm. It is powered by an Orion 2500D @ 1ohm. I have it in a 3.5cuft enclosure @36hz. This sub is by far the best I have ever had. It get way louder than my RE XXX 15" on the same amount of power. http://forum.ecoustics.com/bbs/messages/5/330070.html

I read th eoptions explanation for the SSD but i was wondering if the copper coil increases the thermal power handling of the SSD i know flatwind bumps it up to about 1200 but i was possibily thinking about 4 SSD's + copper running off of 4000 rms

45 Bucks an hour on the Term Lab at a well known shop. They have won alot of the USACi comps... They leave me alone or come out with me and they will help me with settings and what not to decide what the best setup for me is for DD and then give me the settings for SPL comps. The guy I talked to(My friend used to go to him as well for SQ comps) said that we will be done in way less than an hour...but the extra time is nice to screw around with things.. Any thoughts on that? I thought it was a good deal

this is for scott or any of the fi reps... heres what im wanting to do- im working on a show car, and im wanting to powdercoat my subs to match certian parts on the vehicle (baskets to match the exterior color, and top/bottom plate of the motor to match certian trim in the interior) after i order and pay would it be possible to send me those parts so i can get them powdercoated, then send them back for assembly? thanks! (btw- i was going to order 2 tc5200's and have this done, but they have the absolute worst customer service i have ever recieved, i.e.- they dont EVER respond to emails, or pm's on their own forum, and they are generally clueless) Scott has been more than …

Where to start... I am completely Satisfied with every aspect of my purchase. From the Customer Service to the Product...simply amazing. I installed it in a 6^f Box Tuned to 32hz Lets start off with some pics I have a Shoe Size 15-16 I am the kind of person who changes there mind on the fly. I went through many different subs, and box designs before deciding on FI...however, once I read a little bit about them, i was hooked and ordered as soon as my check came in... I was so excited, I build the box in my house(its 0 out side) cause I didnt wanna be in the garage, and I took a half day on wed to meet the UPS guy and on Friday to Finish the install and test i…

Well today I decided to finally pull the trigger on a 15" bl. Lately Ive hear that the SQ on this woofer has been better then people expected while still wangin I built a box last weekend and its been sitting in my car, and I just couldnt stand the though of an empty subwoofer box just sitting there. I will definately post a review + be on step closer to a free shirt woot! Thanks guys Im really looking forward to seeing what this baby can do

im getting an explorer XLT and im wandering how 4 18" q's sealed would do VS. 2 18" BTLs ported. which would get louder which would sound better? im thinkin that the Q's would win both scenarios but i thought id come here to see what everyone thinks...

Hi i'm in the process of building my box for the 15" BTL, I wanna know how long the port will have to be to have a tuning of 32hz. My dimensions are 40 x 20 x 20 with double bracing 3/4" MDF. i did the math and with the double bracing, the internal volume is roughly 7.5 cubes. I wanna know how long the port will have to be at 4", 5" and 6" tall. Thx guys, Fi rocks

I have a 2004 BMW 330Ci. Here is a list of what I have: Eclipse AVN-5435 Audiocontrol Overdrive, ESP-2, DQX, and DDC US Amps USA 200x - tweeters (50x2) US Amps USA-400x - midrange (100x2) US Amps USA-2000x - sub (2000x1) OZ Audio CS-180 (old school superman logo) 1 Fi Audio Q12 D2 in a 2.0 cu ft box tuned to 33 hz with 24 in of port area (small, I know). First, the car Previous setup to the previous setup (3 ID IDQ10 V.2s sealed powered by a US Amps USA-1000) Previous setup (05 RE XXX12) Trunk Another interior shot Controls in center console

lookin for some pics of a 12" bl side, top, and bottom and a review if anyone has one on the 12 thanks

Hey I am going to be getting 4 of the Fi Qs ( come summer ) and I was looking at getting 2 Soundstream 3500ds to power the 4 18s. What would be the best ohms setup to get on the Qs?

I was wanting to get a Q but then I looked at the new BL and it looked pretty much the same. But do they have the same SQ? I would put the options of cooling, flatwind, and universal.

I'm a beginner and I'm thinking of putting a competition capable system in. More interested in SPL.

I have a crew cab titan, and with using glass/wood I can get around 2.5ft^3 or two 1.24ft^3 boxes... sealed would be easiest... but the subs would cost more... and I love the sound of ported boxes ... but it would likely go lower and higher and have just generally better sq... 2 BL 10"s ported... would be nice but I don't know exactly how much space I'd have after sub/port displacment and if the internal shape of the box would affect the performance alot to where it's as bad as a sealed box... I'm on the wall here and can't figure which way to go.. I suppose I could do the BL's 1st since it would be cheaper lol... and if I wasn't happy do the Qs later.. but if I weren'…

hey guys, ive been browsing around the forum for a while and i really like it. anyway i was wondering if you guys would add some pics of your Fi woofers as well as your own setup in this thread. thought it would be cool for everyone to see. thanks

Using 2 sundown 1500d's. Strapped. 2ohm for daily, and .5 for comps. I'd also like to build another box and possibly compete. Wanting loud with decent sq. Will be going in a hatchback. I have 8ish cubes. I'll be using recommended enclosures.

I was just curious about the specs on the lineup,specificly the Q.Maybe its just the picture but the Q18 looks like it has a small mag.Whats the weight of the whole sub?whats the mag weight in oz?Im sure its designed for that application but the BTL is the only sub that looks proportionate.Dont get me wrong everything Fi does I like.My eyes have a hard time with big sub little mag.Hope this makes sense to everybody!

just like it said up top, what size do i need to cut the holes for the 18" bls thanks

Hey guys, Since I will be recieving my 15" SSD + flatwind pretty soon, I figured I would make an enclosure this weekend. It is 35x15.5x21, 3.5 Cuft tuned to 33hz. It was a 2 day, 5 total hour job, but not bad for a 16 year old making my first ported box. And now the pics: Day 1 Various angles of box all put together, screwed, and cauked. http://img153.imageshack.us/img153/593/sub...erbox063oi0.jpg http://img153.imageshack.us/img153/2065/su...erbox065jl1.jpg http://img100.imageshack.us/img100/754/sub...erbox064bt2.jpg http://img100.imageshack.us/img100/4791/su...erbox067qi5.jpg http://img153.imageshack.us/img153/8339/su...erbox067zj5.jpg Day 2 Carpeting Sides: http://…

Two fully loaded btls on a memphis 4kd 12 cubic foot box @ 34 hz. Straight up nasty. These vids suck but i worked with what I had. Anyways... O hell yeah....Dirty car sucks...

well im sorry to say i wont be able to get a 15" btl. because my wife and i found out were going to have a baby. so i was thinking about an SQ setup. with a 10. probably a Q10. and i am thinking about building a fiberglass box for it.. how would i go about doing this. what size and should it be sealed or have a little port. so i hope to do this. sorry about the btl thing really really wanted to get one of those. so yeah. thanks.