General Fi

hey, i am curious as to why some people want to recone one size sub with another size, like 18 reconed like a 15. I have seen numerous threads about this and am just very curious as to what this accomplishes in the end. Thanks

i been looking at this forum for a while know and i see a lot of people asking to get a recone. is it users fault or is their something wrong with the series of sub?. most people say this about the Btl im

hi ! i would like to know wich FI sub would match the better with my amp to get the most out of it... ? I would like to go with 1 12", the enclosure size will fit on my back seat, that's why... so my amplifier is a kenwood KAC-9105D rated at 500 watts RMS x 1 at 4 ohms (900 watts x 1 at 2 ohms) and 1ohm stable, the output regulated at 900 watts... and the last sub i got is a fck'n kenwood excellon who is the top of the line of kenwood and in 1 month i cooked the coils... : ( the sub was a 12" 600 watts rms and 2000 watts peak and is a dual 4 ohms. I am on my way to make a new setup : i would use a deep cycle battery and plugged the amp only on it and the amp to the subwo…

well i ordered 2 btls friday night, i got a pay pal verification, order confirmation from fi, then i got this wierd e mail that i havent seen before : i did not recieve this emauil when i purchased my Q so i wanted to check it out. is it legit. thanks for any help

I ordered a 18" BTL at 1ohm. I have a Hifonics brutus BRZ 2400 watt rms will that be too much? Also if my sub is 1ohm can i wire it to 2ohm on the amp that way it only push out 1700watts rms?

I have always prefered sealed systems. They always got loud enough, and were easy to build. I just got a D2 Cu voice coil SSD for the wifes car. I have it in a 1.3cuft net box. Approx 1000w available, but its not all being utilized. I feel like I am pushing the sub to its limits, but it's not as loud as it should be. The install is only 2 days old...will SSD's get louder as they break in, like other woofers? I know the alum coil can handle more power, and is peakier....but will it be louder? I think the next step will be a ported box.

so fi has upgraded the btl ssd and q to the single slug motors, do they plan to do the same with the bl? i have a ssd and wanna try the bl but would like the newer version if its coming....

do you guys think i will be alot louder. i had 2 12" P1 rockford fosgates 150 rms 300 peak and now im upgrading to FI ssd 15 1000 rms

I have a 12" FI "Q" running off of a JBL BP 1200.1 amp. The amp is suppose to run 1200 watts rms and I am running it correctly wire wise. Do you guys think it would perform better with a different amp setup? A friend of mine suggests a kicker amp. what do you guys think?

will running a universal sub with a non-universal sub creat any problems? will there be any difference in sound or will i notice a difference in the 2?

Hi Everyone, I originally thought there was a problem with the subwoofer in my Expedition so I got an 8" RE re subwoofer on ebay to replace the oem. And this 8" RE8 is the single voice coil version, made back when Scott was in charge =). When I swapped the drivers, unfortunately I found out that it was the amp that was the problem. I opened the amp up and took some pictures of the guts. I didn't see any physical damage. Although I did find a piece of small plastic loose, but the weird thing is that it didn't look like it came from inside the amp. Here are the pics: Anyways, back on topic,... will there ever be an 8" driver. I understand they don't market or sell ver…

will this amp be enough power for a 15" dual 2ohn BL with cooling option for daily use? the Sundown Audio SAZ-1000D

Hello, im making a box for my 15" Fi BL its gonna be 36 x 18 x 18 4.7 ft3 @ 30.5hrz daily driver just looking for some ground shaking fun : ) will this be a good box for that woofer?

Will I be able to fit 2 Fi Q 18's in the back of a Mitsubishi Montero LS 1995, if not one is good

so how do i go about getting a small window sticker logo thing? apparenly they send with the subs but they must of ran out when they got to my Q15 thanks..

World Finals West Coast, San Mateo, CA..... Fi donated some subs to raffle off this weekend and i made a little video of the lucky new owner of some nice SSD's....he was happy as hell to get them too http://www.stevemeadedesigns.com/videos/fiSSD.wmv Congrats! Enjoy bro!

does anyone know some websites that have good diagrams of how to hook up amps and subwoofers.

Okay so i done a search and couldnt find much on this, so i need to know weather to get dual 1 ohm or dual 2 ohm on a single btl for a daily setup, in a 2 cubic ft box with this amp http://cgi.ebay.com/Power-Acoustik-OVN1-3000D-MONO-3000w-Car-Amplifier-Amp_W0QQitemZ230365510858QQcmdZViewItemQQptZCar_Amplifiers?hash=item35a2dabcca&_trksid=p3286.c0.m14 .... and depending on what ohm set up for the speaker does some on have a diagram of how to wire it up? Thanks in advance!

Alright, so tonight i was planning to sit down and order all my wiring, connectors and terminals for my upcoming install. Eclipse CD7000 Hertz High Energy comps 2- 12" FI BL's 2- Sundown 1500's 1- Sundown 4/100 2- Kinetik 2400 220 Amp Iraggi Alt. 2006 Grand Prix I started mapping out my runs and trying to get figures for wiring, terminals etc when i realized i wasnt exactly sure how i should wire everything. I plan to finish the big3 as im installing my alt, thats no problem. Then run my 1/0 runs to the trunk where my 2 kinetiks will be. Here is where im confused... i know i need to run the batteries in parallel. This is as far as i got... Should i use dual battery term…

Okay so i got the 2 12" Fi SSD and i have a 1800 Watt MA Audio 2 Channel Amp The subs are dual 1 ohm and i was wondering how would i need to wire them?

soo i have looked all over and i cant figure out how i should wire my sub to my amp.. i have a rockford fosgate t3001bd and a fi btl 18 fully loaded.... should i do it one ohm and how would i wire my sub and amps down to one ohm.. ohms are extremly confusing to me edit- and my sub is dual 2 ohm

Okay So since the SSD are dual voice coil. (2)SSD12 D1 COP Are those going to be running at 1 ohm or 2 ohm

Would i need to get the dual 1's or dual 2's to get a 1ohm load out of the amp and also how would i wire them to get the 1 ohm load http://www.the12volt.com/caraudio/woofer_c...sp?Q=2&I=42 is that the right wiring even though it says its for 4 ohms? EDIT: if i were to get TWO of them

well i been lookin at the BL 15 for a while now and I decided to grow a pair and buy one! Placed my order, hurt to look at the receipt a bit but it'll be worth it! my 6" PSP port should be here shortly too ;P

Well sorry it took so long to post, but I've had poblems with my log in and had to redo another one. Scott, I had some trouble getting ahold of you at first because you had no phone number. I am glad I waited, Thank you for responding to me about the subs and getting them made and shipped to me in a rush. Thanks bro.... you'll have another order for two more subs in just a bit. On the weekend of March 3-4 we went out to spring break jam and took 1st place with RXZILLA with a 156.2 and took the world record at 151.3 in the Pro-stock 0-600 class. Not too many people knew about FI AUDIO but after that run....everyone was refreshed about your product. Thanks again Scott. A s…