General Fi

I was about to place a order for a pair of BTLs until I read the warranty info "WHAT IS NOT COVERED? This warranty is valid only if the product is used for the purpose for which it was designed. *DUE TO THE EXTREME NATURE OF ITS INTENDED USAGE, THE BTL SERIES OF SUBWOOFERS HAS NO WARRANTY COVERAGE (outside of arriving in proper working condition after shipping)" So if I want a sub with warranty coverage I have to choose a lower line like the BLs?

Hello. I have 1 15" Fi BTL for now and I was looking at getting another in the future. I found a pretty good deal on an Ma audio HK4000D. My electrical will have the Big 3 done and I have 1 Kinetic 1400 battery but also soon to be at least one more. Would this amp be worth the money to push 2 15" Btl's daily (Rap) to their full potential or is it overrated?

#494 I ordered a ib3 recone and glue 3 months ago. I got my recone with no glue about 1 1/2 months ago. FI/shawn has said he has shipped it 3 times. Should I just go to the hardware store and get some epoxy? Not Happy, i paid for the glue but ................... this is b/s

Just curious. As of right now for me, I ordered mine on sunday. Still haven't received any email yet other than order confirmation :/ I do realize today is the first business day though. I wonder what the quickest someone has received theirs is.

Need Ideas on A Nice Amp For under $300 to power a 12" BL, Please let me know, or if there are none for under $300, give me other suggestions

Hey guys, kinda new to car audio, but i do still know alot of the basics... Right now im running a jl 12" w3v3 in a sealed box, with a rockford fosgate p5002 (LINK) bridged of course. I kinda want a little more power, which fi audio sub would you suggest (i want to try and use the same box and amp)

hey everyone i'm looking to make an upgrade. i currently have 3 12's a crunch gp3000d pro amp which is suppose to be underrated at 3kw rms at 1ohm. i also have 0 gauge wiring a 300 amp alt fatmat throughout the entire vehicles i think two layers in some place but atleast one layer throughout the entire vehicle. i have an optima red top under the hood and a kinetic hc1800 in the back for the subs. i have a 1997 ford explorer sport (2 door) and i am interested in either 2 fi btl's 15's or 1 fi btl 18 n2 model i have enough space to run the 2 15's or the single 18 with no problem now my question is which would give more output. i love lows so im looking to have the box tune…

im about to get a fi bl 12 and i was looking for a amp but im not sure for what amps are good. btw im new to car audio

Ne one know the release date on the btl n3's?

what are you guy's favorite songs to bump. what songs hit really hard.

I saw a picture of an N3 motor but I can't figure out how much of the motor is actually neo. So there are three lobes tot he motor and then there are a few blocks of material per lobe. The top plate, then two thin pieces side by side, then one big piece, and then the bottom plate. Is the neo just the thin pieces that have two side by side per lobe or is the block underneath that which is much bigger made of neo also? How does this compare to other neo woofers out there like the DC or the DD 95z or 99z?

Shipped my n2 motor to fi. It was delivered and signed for July 20th. One month later, 5 emails to fi... nothing. I have been very patient and very polite. Could I please have an update?

Ok, so i currently own a vw mk5 gti, and it has a rather small trunk space to say the least i plan on a small 12" sub. This is the trunk space i have to work with. (Picture is not my trunk) A friend of mine had a few 18" BTL's in his truck, big fan of steve meade. He says he would recommend nothing but Fi Audio for subwoofers. So im going to take his advice and go with that. I also will be using that for daily sound not SPL. He suggested the BTL 12" , unfortunately i dont know much about them, and he isnt around enough to be a big help. I realistically dont need the 2000 watts atm, but it would be nice to have that option for later, but someone i know said its not good …

I have a 2 cubic foot box ported at 32 hz, and a hifonics amp that puts out "1200" rms at 1 ohm. Would a BTL run ok with this setup???

i have a 1998 buick century im getting a box build for my trunk for an 18 inch BTL, but one problem my back seat dont let down. i can't take it off because i have kids just wanting to know from you guys would that 18 still sound good with back seat being up?

Ok I am new to the forums and hope this is the right spot to ask. If it is not...please point me in the right direction. Anyway I am interested in finding out what it would cost or if fi has any Re audio xxx 12" 2006 recone kits? I believe it is a Dual 2 ohm sub. Please let me know what i need to do to get one! thanks!

Well im currently in the process of re-doing my current setup for either 4 BL 15's or 4 BL 12's.... whats everyones opinions on this... I'm open to all suggestions

Looking into getting 2 sp4 18s or 2 team 18s....whats the wait time if i ordered either one?

ok so the custom box ive got is for 4 15's and has 2 ports each allegedly tuned to 32hz but they both sit up top with woofers firing at the roof, does having the port in different areas help or does it depend on the vehicle?

ok guys i bought 2 18'' btl dual 2 ohm subs from a guy that owns a shop near where i'm from, and i was told they were btl's fully loaded built back in 2007-2008 but i am not familiar with the magnets. ii was thinking somebody might know if they were older btl double stack motors? i have emailed fi but i have no number to contact them at. my main concern is what power i should be running to them if there not btl's i will include both links for the pics. thanks http://img822.imageshack.us/gal.php?g=imag0120d.jpg http://img337.imageshack.us/gal.php?g=imag0130o.jpg

Thought I would share some of my install pics on my Chrysler 300. This was built to be a SQ car and the whole theme was to make the car to appear as factory as possible and able to return the car back to factory when that need arrises. There are only 2 factory pieces that will need to be replaced to return it to that form. the dash bezel, A pillars are the only thing modified that cannot be returned to house the factory equipment. the doors were not cut into, actually the factory speaker grills were plastic welded in place and we can simpliy remove the buildouts and reweld them back into place. There was not a single factory wire cut in the car, if one needed cut a n…

I have four BTL 15 N2s, all ordered and received a couple months ago. The web site claims a cutout diameter of 14.125 inches. Well good thing I measured before I cut, because that's too big for any of my subs. And what's more, the subs all differ from each other! One sub takes a cutout of 13.75, another a cutout of 14, and the final two a cutout of 13.825. (I verified these exactly by cutting different-sized holes in scrap wood with my router, then fitting the subs). All subs have the same outer diameter of 15.5 (again not like the website, which claims 15.625). I must say I'm kind of surprised the manufacturing tolerances in the basket can vary this much? Is this expect…

I have a older dual slug Q and I want to run two Q's now. Would I run into any problems running a newer Q with athe older one in a ported enclosure?

I placed an order back in 1/17 and my order number is 967. what is the norman wait time for Fi subs??? thanks

Is there also a 10-15 business day turn around time? Need one asap!