General Fi

This past weekend I attended DBDrag World Finals at Dayton Ohio (I only live 45 minutes away) and competed in the 3x event. The event was ran great from the judges and ran smooth from start to finish. I was very happy to see fellow Fi competitors. One was Dr. Boom. For those of you that don't know him, he has 6 15" BTLs walled in a Scion xB off of 6 Sundows 3500s. His install was by far the cleanest there, and his car was a show stopper for sure. I got a demo from him, unfortunately my esophagus started to close up so it got hard to breathe, but boy did those BTLs sound great!! A total of 5 light bulb covers fell from the ceiling, 3 from Dr. Boom himself, the other…

I ordered my Fi sub about the beginning of this month, i was wondering when will i get my sub. then i get a call about my sub being delayed, man!.. missing my bass.... wondering how long Fi?

I was wondering if anyone has managed to put one or 2 15" FI audio subs in an extended cab ranger. I have a 95 that I would like to upgrade. I currently have 2 Jensen competition series 12's in a deathbox II and its just not enough for me. I have seen 15" subs in rangers before, but I would worry about fitting a big enough box so they sound nice, and FI subs seem to need slightly larger boxes than some other 15s BTW, If anyone is selling USED amps or subs that are in good shape, I would love to know!

I'm pretty new to ficaraudio.com but wondered if I needed an extra battery for an amp with 2000 real watts I'm planning on buying a Fi bl 15'

http://www.youtube.com/watch?v=hH2i8j9tDIU

how long does it take for the btl to break in? ive heard the subwoofer break in is a myth

Is there any time frame on these to be available? As in a month. Two months. Longer? Just been looking around and can't find any estimates in the past few months.

i have one ssd 10 and i was wondering if a 2cubic foot box would be too big if the recommended size is 0.6-1.2 cubic feet

i have a btl 15 last years model just ordered this years model (n2) trying to get a box build for both the subs but dont know if all the measurements are the same just need some info thanks........

how many hertz should i tune fi n3 12 subs box to the fs around 50 i was thinking around 46 hertz any suggestions cubit feet? oh and its going to be in a back seat of a toyota celica gt 90 not a hatchback so limited on space fi doest say frequency and the fi 's cubic recomendation seems low for the n3s?

I have a saz3500 and i was wondering will that be enough to power to get these bad boys moving?

I bought 2 fi bl 12s on feb 20 and still still never receive them. Just was wondering how long suppose to take? By the way i live in hawaii if that make any difference.

1:Is there a difference between these two? 2: Does the filter have to match the boxes tuning? Or is there an acceptable range? I have the RF T-2500.1BD amp with a 28Hz infrasonic filter. 3: If I use a box that is tuned at 32Hz, will this be sufficient? 4: If not where can I find a good subsonic filter? Thank you for any answers or suggestions.

Just as the title says. Should it be "F.I.", or pronounced "fye" (as in rhyming with pie)? Don't wanna sound stupid when I'm showing off my system. Won't believe anyone until nick responds

they have told me that it will be available on march 1st, but it is almost the 3rd and still no signs of it coming, when will it be ready, i already want a pair

So I've searched this subject just can't seem to find an answer. I have a 15" SSD basket and motor(double stack), how can I tell what coil was in it before? I don't want to buy the wrong coil and it not fit as FI says the flatwind coil option has an upgraded motor. Thanks in advance!

Hey Nick, I've only e-mailed you 27 times within the past couple of hours, but someone suggessted I should put it here JUST IN CASE Need to get my order changed from dual 1 ohm to dual 2. Everything else should be exactly how I ordered it. Invoice # I-15944/00 Thanks.

Hello I sent in my 12" BTL to get re-coned, and I haven't received any word on when it will be returned. I sent a couple of E-mails over a week ago and haven't got a response from the re-cone department. My Order#I-15761/00. If a Mod. can get back to me as soon as possible that will be great. Thank you.

installed a 12" bl in a buddys truck in 2.4cu - 32hz tuning. powerd off an AQ1200. this thing really hits the lows and sounds good,cant wait till he plays it enuff to loosen it up. very nice Fi

Hey guys, I made a post about a problem with my fully loaded bl. Its just not as loud as it once was and Im still having problems but ive ruled out about everything and rewired everything. Now im thinking its my amp that is the problem. Is there a way to tell if your amp isn't working properly? I can't figure out how to tell i took off the faceplate and didnt see anything and it still turns on just fine. My only concern is i backed into a truck and so my trunk is slightly bent up a little bit making the seal not very affective causing my amp to get frost on it when i put my back seat up at night. Is there any way to really be able to tell if my amp is having a problem? Im…

The competition at Indianapolis for DBDrag on February 26th had 5 competitors in the Street B class. Including myself, we all had trunk cars. I wasn't planning on running DBDrag (only bassrace) at first cause I found out I'd have to disconnect my rear two batteries for the Street B class. Well then I started watching the qualifying runs and saw three 137s, and one guy with a 140.1. I knew my N2s on my AQ 3500.1 would hit near the 142 range, so I ran to Ace Hardware, bought some bolts, and disconnected my rear batteries. Since I qualified so late, none of the Street B guys even knew I was in there class. I think my qualifying score was a 141.9. When it came time in …

Hey everyone, I've had my fully loaded bl 15 for about 5 1/2 months and i love it. But now all of a sudden im having some wierd issues. One morning when i got into my car and was driving i noticed i had no bass at all so out of curiosity i turned it up to listen closer and all of a sudden the sub kicked in but when it did it was distorted sounding. Now ever since its been the same way and not to mention its not very loud now. Even when i first got it and was using my stock battery it sounded louder and better. Could my setup be clipping? Any thoughts? All help is greatly appriciated!

ok guys im new to all of this so take it easy on me first of all i ordered two fi btl n3 12s... so so excited i had alot of other cheap subs and want something better now what i would like to know is the btl n3 just for burping ? or can i play long bass songs- they didnt have the option for daily , and i know this babys are for spl but i want to beat them in my car daily and roll up to spl competions tooo. any advice or knowledge would be greatly appreciated o and so far the setup im going to be running is 2 fi btl n3 12s box size ? dont know need help 4 kinetic 2400s audio que 20

i just got my 15" n2 btl fully loaded. I was wordering how long does it take to break it in? How many watts should i put on it until its broke in?

Ladies/Gents, Some good friends of mine from college are in a competition for a Dream Wedding giveaway. They are in the running with a local radio station to have their dream wedding given to them if they get enough votes. The final round of voting starts today!!! They finished the second round in first place thanks to everybody's vote! Please vote for #10, Tiffany Phelps and Joseph Nichols I promise you are not going to get spam email or anything from entering your information. It is simply to keep people from 'cheating'. Please only vote once per round. I do not want them to get DQ'd. http://www.wvhl.net/wedding%20promo%20stage%202/vote_round_1.htm Click that, vote #1…