General Fi

Hey guys, I thought it would be a good idea if we could have a place to check the status on our subs upon request. With the new contest, I thought it would be a great addition to the board. The UPS tracking number is one way to check, but when your in my situation, about 4+ days for an SSD, I think it would be nice to know how your sub is doing, and when it will ship out. I know the guys at Fi are busy, and although this would be a great addition to the forum, they have the final call if this thread is a go. So I will start. Please include your name, e-mail, day payment was recieved, and type of subwoofer.

Does anyone know if fi gives discounts on bulk order I need 6 more 18 bls to finish my build and im on a budget right like whos not. Subs are just 1/5 of my cost and tax time Here so I figure they are pretty busy since I havent recieve an email back from them.

Hello there. I am looking for a subwoofer to compete in Swedeish serie of Bassrace this summer,I've been looking at the BL's and the BTL's and i am not realy sure what to go with. Because thay need to handle music both loud and ("Good" if you can say that about SPL woofers). The Amp i got at this moment is a Mutant 1500xxx,so i have abit over 1500wrms to play with. I have send mails to you guys at FI somehow i haven't got an replay yet so i'll take this in the forum insteed. Is it possible for me as a Swedish cusomer to buy subs directly from you? Have a nice day // Confused guy from sweden.

Two (2) Questions: 1) Is the Fi websie the only place you can buy Fi Subs? 2) If am supplying 2000 watts (Hifonics BXi2008D) to (2) 15 SSD, would it be better to inculde the flatwind or the copper coil feather on these subs? Thanks

I recently had a system set up in my xterra and i had purchased a dual 2ohm Fi Q 10" to be run by a cadence iA7 amp. (see following link for specs on the amp: http://www.powermaxelectronics.com/product...amp;idcategory= ). The box was built to be stealth in my xterra and is a sealed and i was told built to house about 0.4cubic feet. (middle of recommended area for this sub) that said, they told me the measured resistance on each coil was ~1.5 ohm so they set up the system to push 3ohm. however, it seems that the sub is rather flat or not quite as responsive as the installers would have expected. i was told that this amp doesn't have enough power for the sub but in t…

Yo Scott can you help me with those recones or no? I haven't heard from you. Thanks

Finally got started the other day on the wall build, mainly just measurements and taking body panels out....here are some of the pics so far, I should be adding more at the end of each week until its done....also added some sound deadener tonight....anyway, here are the pics... only put the sound deadener on the front half of the roof (2 layers), more will come i hope Dan

Can a BL 15 handle 1000 watts rms on music for 10 to 15 min at a time with just p chamfer, Daily?? I need to know asap so I can place my order. In a 3ft3 enclosure tuned to 48hz.

can a btl 18 take 2500 RMS daily??

Can a fully loaded BL (cooling, flatwind coil, p chamfer) take a sundown 1500d easily?

The reason why i ask is i currently have 4 RE SE 15" running off of a T40001bd,, they sound great but im only hitting a 148.3 with them so since i want to brake into the 150's I want to get a second T40001bd and some stronger subs,, thing is i like the way these SE's sound so Im trying to get something strong but that can sound atleast as nice as these SE's..

Title says it all...I have a Crunch GP3000D and would love to move up to an 18" Fully Loaded BTL but I'm concerned it may not be able to handle the power...box is still up in the air, I have MORE than enough space to work with (almost 9 cubes) Right now the electrical is a 235A DC Power alt, big 3, and yellowtop under the hood. So before I proceed with any plans, with an 18" Fully loaded take 3kw daily without problems?

I have a 2008 honda Civic EX-L with premium sound upgrade and it has a IB setup with an 8" woofer and it needs some help. Now I know Fi has done IB 18 &15 but can yall build be a very efficeint IB 8"? to replace my current stock 8"? thanks P.S. I Pm'd scott already for pricing but I know how busy he is so I figured I'd ask here if its even possible.. thanks Matt

Can fi recone an atomic apx?

i have an MTX 8500 sitting in my garage collecting dust, dude said it was working fine but it came frozen. is it possible for you guys at Fi to recone this thing with your soft parts?

im new to this site and reading posts fi can recone a majority of drivers. so my question is can fi recone a elevation audio x15 drivers. not their current execution woofers but the original ones with the aluminum cones. the motor uses a 3" vc and i want to reuse the execution motor with a fi basket and recone kit. i have 2 which are taking up space in my room 1 still plays but is on the way out and the other one is frozen. so get back asap thanks alot

Pretty much as stated at the top, I'm just curious if they can recone it for me, and if they do will I lose all the linear travel I had? How will it affect my power handling and sound quality? Thanks for any and all help guys.

Hey scott, wanted to know if u guys can recone a first gen. (four spoke basket) brahma and if so, how much would this run? thanks, chi

I just realized I ordered the extreme leads for my BL 18's that are intended for daily/bassrace, I ordered the subs about 2 days ago. Is it too late to get rid of the extreme leads, or is it not really going ot be an issue? PLEASE HELP. If there is somebody I can contact by phone please pm me with the info. Thanks.

i want o ask some questions about Fi Car Audio

i just order 1 more fi btl 12 but not sure if it will fit. my trunk is long enough at 44 inchs width is the issue, at the tail end of my trunk it measures 57 inch in width for 23 inches in length then then the width narrows down to 32 inches width. i need help.. the height of my current box with 1 btl is 15 inch

Hi, is there anyone in charge that can look up to see where my sub is in the delivery world? Theres no phone number to call them

can I recone my bl that came with reg coil with a flat wond coil is the gap the same?

so heres the deal, i have a 15" powered woofer in my apt hooked up to my pioneer ELITE 7.1 receiver, here are some of the specs, powered by a built in (Bob Carver) 500 rms sunfire amp Specifications ( Brand) Acoustic Research (model) ARS500 Driver Complement High power handling 15" Woofer (110oz magnet) Frequency Response 18Hz-120Hz±2.5dB Crossover Frequency 50Hz(24dB/Oct.)~120Hz(36dB/Oct.) Continuously Variable Rated System Power 500 Watts RMS Enclosure Dimensions 18 1/4" x 17 3/4" x 24" this woofer still sounds good but after years of abuse i have been wanting to replace it but dident know what would work with the built in amp if anything from F.I., was maybe thinkin…